Abstract:Aspheric mould design includes the top-down design and reversal design. In this paper, a new framework of reversal design is proposed combining with cloud supported collaborative design (CSCD) based on aspheric measurement. The framework is a kind of collaborative platform, which is composed of eight modules, including the computerized aspheric precision measurement module (CAPM), computer-aided optical design of aspheric lens system (CAOD), computer-aided design of lens mould (CADLM), FEM(finite element method) simulation of lens molding module (FEMLM), computer-aided manufacture of lens & moulds (CAMLM), measurement data analysis module (MDAM), optical product lifecycle management module (OPLM) and cloud computing network module (CCNM). In this framework, the remote clients send an improved requirement or fabrication demand about optical lens system through CCNM, which transfers this signal to OPLM. In OPLM, one main server is in charge of the task distribution and collaborative work of other six modules. The first measurement data of aspheric lens are produced by clients or our proposed platform CAPM, then are sent to CAOD for optimization and the electronic drawings of lens moulds are generated in CADLM module. According the design drawings, the FEMLM could give the lens-molding simulation parameters through FEM software. The simulation data are used for the second design of moulds in CADLM module. In this case, the moulds could be fabricated in CAMLM by ultra-precision machine, and the aspheric lens could be also produced by lens-molding machine in CAMLM. At last, the final shape of aspheric lens could be measured in CAPM and the data analysis could be conducted in MDAM module. Through the proposed framework, all the work described above could be performed coordinately. And the optimum design data of lens mould could be realized and saved, then shared by all the work team.

Equipment for 2-D profile measuring of aspheric microscope condenser in mass production - art. no. 68343L

Discussions on On-Machine Measurement of Aspheric Lens-Mold Surface

Measurement of Aspheric Surface

Research on Two Optical Methods for Aspheric Measurement

Study on testing larger asphericity in non-null interferometer - art. no. 68340T

The wavefront aberration analysis and testing accuracy evaluation for the large aberration aspheric system based on the best fit sphere - art. no. 68342V

An on-line measuring technique for lapping large aspherical mirror

The Wavefront Aberration Analysis and Testing Accuracy Evaluation for the Large Aberration Aspheric System Based on the Best Fit Sphere

Experimental Study on Precision Molding of Small Dual Aspherical Chalcogenide Glass Lens

A Framework of Cloud Supported Collaborative Design in Glass Lens Moulds Based on Aspheric Measurement

Accurate Inner Profile Measurement of a High Aspect Ratio Aspheric Workpiece Using a Two-Probe Measuring System

Aspheric and Free-Form Surfaces Test with Non-Null Sub-Aperture Stitching

Ultra-precision Single-point Grinding Technique and Profile Error Compensation Method for Machining Aspheric Mould

Profile Measurements of Micro-Aspheric Surfaces Using an Air-Bearing Stylus with A Microprobe

Compact Design of Projection Lens for 3D Profilometry Based on Interferometric Fringes

Method to Design Two Aspheric Surfaces for a Wide Field of View Imaging System with Low Distortion

Full Area Covered 3D Profile Measurement of Special-Shaped Optics Based on a New Prototype Non-Contact Profiler.

Testing of Large-Aperture Aspheric Mirrors Using a Single Coated Lens.

Pose-varied Swing Arm Profilometer Test for Off-Axis Aspheric Surfaces with Strong Asphericity

Simulation Of Aspheric Tolerance With Polynomial Fitting

Analysis of Diffraction Spectra for Measuring Surface Form of Spheric and Rotationary Symmetric Aspheric Components