Abstract:According to the requirements on minimizing the package size, guaranteeing the performance uniformity and improving the manufacturing efficiency in LEDs, a Chip Scale Packaging (CSP) technology has been developed to produce white LED chips by impressing a thin phosphor film on LED blue chips. In this paper, we prepared two types of phosphor-converted white LED CSPs with high color rendering index $(\mathbf{CRI} > 80, \mathbf{CCT}\sim 3000$ K and 5000K) by using two mixed multicolor phosphor materials. Then, a series of testing and simulations were conducted to characterize both short- and long-term performance of prepared samples. A thermal analysis through both IR thermometry and electrical measurements and thermal simulation were conducted first to evaluate chip-on-board heat dissipation performance. Next, the luminescence mechanism of multicolor phosphor mixtures was studied with the spectral power distribution (SPD) simulation and near-field optical measurement. Finally, the extracted features of SPDs and electrical current-output power (I-P) curves measured before and after a long-term high temperature accelerated aging test were applied to analyze the degradation failure mechanisms. The results of this study show that: 1) The thermal management for prepared CSP samples provides a safe usage condition for packaging materials at ambient temperature; 2) The Mie theory with ray-tracing simulation can be used to simulate the SPD of Pc-white LEDs with mixed multicolor phosphors; 3) The degradation failure mechanisms of Pc-white LEDs can be determined by analyzing the extracted features of SPDs collected after aging.

Research of Remote Phosphor LED Based on Spin Coating

Novel Measurement System and Analytical Method for White LED Phosphors

A Remote Phosphor Coating by Lens Wetting for Phosphor-Converted White Light-Emitting Diodes

Self-adaptive Remote Phosphor Layer for PC-WLEDs with Vertical Chip

Thermal Remote Phosphor Coating for Phosphor-Converted White-Light-Emitting Diodes

Effect of the Substrate Temperature on the Phosphor Sedimentation of Phosphor-Converted LEDs

Excellent color quality of phosphor converted white light emitting diodes with remote phosphor geometry

Optical Model of Laminated Remote Phosphor Films and Its Application in White LED

High-efficiency Technology of LED White Light Based on Phosphor Glass

Effect of particle sizes and mass ratios of a phosphor on light color performance of a green phosphor thin film and a laminated white light-emitting diode

High color-rendering flat lamps using quantum-dot color conversion films

Numerical Simulation of Light Extraction from Remote Phosphor LED

Influence of Phosphor Particle Size on Visual and Non-Visual Performances of White Light-Emitting Diodes for General Lighting

Angular Color Uniformity Enhancement of White LEDs by Lens Wetting Phosphor Coating

Selection of Remote Phosphor Led Packages for Improving Luminous Flux

Structural Optimization for Remote White Light-Emitting Diodes with Quantum Dots and Phosphor: Packaging Sequence Matters.

Studies on Optical Consistency of White LEDs Affected by Phosphor Thickness and Concentration Using Optical Simulation

LED Wafer Level Packaging with a Remote Phosphor Cap

CaS: Sb3+, Na and ZnS:Sn2+: phosphor materials for the improvement of WLEDs

Thermal, optical and electrical analysis on phosphor-converted white LED Chip Scale Packages with both experiment and simulation

A Comparative Study Of Reflective And Transmissive Phosphor-Converted Laser-Based White Lighting