Abstract:Among the various fossil fuels, natural gas is a clean fuel because it has a less adverse impact on the environment compared to other energy sources. Natural gas emits less hazardous gases and less CO2 upon burning. Water, CO2, N2, H2S, and other contaminants could be present in raw natural gas, depending on its geographic location. The main issue among these contaminants is CO2, which decreases the calorific value of natural gas and corrodes pipes and process equipment. Absorption, adsorption, membrane separation, and cryogenic separation are the four main CO2 separation technologies. Cryogenic technologies for natural gas purification are environmentally friendly because they involve physical separation, and no harmful chemicals are required. Although cryogenic is an attractive alternative, it has some process limitations. The water must be removed before cryogenic separation because it can create piping blockage due to ice formation. The main goal is to remove water from natural gas at optimized conditions. The absorption technique employing triethylene glycol (TEG) as a solvent is the most widely used technology for dehydrating natural gas. Water extracts from natural gas as it passes over TEG, which acts as a dehydrating agent. The harmful effects of TEG on the environment are this technology's principal drawback. The current work investigates the dehydration of natural gas utilizing a low-temperature packed bed which could be an attractive alternative due to the absence of harmful chemicals. A thorough simulation analysis was carried out to learn more about the impact of the process parameter on the separation. The results showed that the pressure increase from 1 to 5 bar resulted in water removal from 25.4 to 83.7%. The optimum temperature and pressure for maximal water removal from natural gas were also determined. The maximum water was removed at 34 bar and -7.3 °C.

Temperature Swing Adsorption in Natural Gas Processing: A Concise Overview

Feasibility of Temperature Swing Adsorption in Adsorbent-Coated Microchannels for Natural Gas Purification

Performance Exploration of Temperature Swing Adsorption Technology for Carbon Dioxide Capture

Natural gas treating by selective adsorption: Material science and chemical engineering interplay

Elevated Temperature Adsorbents for Separation Applications

High sour natural gas dehydration treatment through low temperature technique: Process simulation, modeling and optimization

Multiscale design of a pressure swing adsorption process for natural gas purification

Advances in Pressure Swing Adsorption for Gas Separation

The removal of CO2 and N2 from natural gas: A review of conventional and emerging process technologies

High-pressure adsorption of H2S, CO2 and CH4 on porous aromatic framework (PAF-30) at different temperatures

Thermodynamic Exploration of Two-Stage Vacuum-Pressure Swing Adsorption for Carbon Dioxide Capture

Simulation of CO2 capture from natural gas by cyclic pressure swing adsorption process using activated carbon

Progress of Flue Gas Purification and Sulfur Recovery Using TSA Technology by Carbonaceous Methods in Moving Beds

Adsorbent Characteristic Regulation and Performance Optimization for Pressure Swing Adsorption Via Temperature Elevation

Postextraction Separation, On-Board Storage, and Catalytic Conversion of Methane in Natural Gas: A Review.

Technological horizons in natural gas processing: A comprehensive review of recent developments

Thermodynamic Study on Two Adsorption Working Cycles for Direct Air Capture

Economic assessment of a natural gas upgrading process using pressure vacuum swing adsorption for nitrogen removal

Steam-assisted Temperature Swing Adsorption for Carbon Capture Integrated with Heat Pump

Nitrogen rejection from low quality natural gas by pressure swing adsorption experiments and simulation using dynamic adsorption isotherms

State-of-the-art in Applications of Pressure Swing Adsorption Technology