Abstract:A broadband and scalable mode multiplexer (MUX) using an adiabatic coupler (AC) assisted with subwavelength grating (SWG) is proposed and analyzed in detail. The adiabatic coupler consists of a strip bus waveguide and a tapered waveguide whose width decreases along the propagation direction so that the fundamental TE mode cannot be supported well and will be coupled into the high-order mode in the bus waveguide via mode evolution due to the phase matching. On the contrary, the fundamental TE mode injected into the bus waveguide will keep propagating in the same waveguide with negligible coupling. The SWG is incorporated into the gap between the bus and tapered waveguides for effectively enhancing the mode coupling, leading to a reduction in length of the device. By carefully choosing the structural parameters, the proposed TE0/TE1 mode MUX shows a low insertion loss (IL) of 0.07 dB (0.01 dB) and crosstalk (CT) of -24.01 dB (-21.25 dB) for the coupled TE1 mode (the through TE0 mode) at wavelength 1550 nm while the coupling length is compact as similar to 8.8 mu m. The device achieves a broad bandwidth of 165 nm for CT < -19 dB and IL < 0.11 dB over a wavelength range of 1460 to 1625 nm, covering the whole S, C, and L bands. Moreover, the device also shows a good fabrication tolerance to the deviations of the waveguide width, the total height of the device and the grating duty cycle. In addition, the TE2 and TE3 multiplexing are also presented, showing the scalability of the proposed scheme. (C) 2021 Society of Photo-Optical Instrumentation Engineers (SPIE)

An ultra-low crosstalk and broadband two-mode (de)multiplexer based on adiabatic couplers

Ultra-compact Silicon Mode (de)multiplexer Based on Directional Couplers with Subwavelength Sidewall Corrugations

Silicon Mode (de)multiplexers with Parameters Optimized Using Shortcuts to Adiabaticity.

Design of an Ultra-Broadband Silicon Mode (De)multiplexer

Mode Multiplexers With Tapers Based On Shortcuts To Adiabaticity

Experimental Demonstration of a Broadband Two-Mode Multi/demultiplexer Based on Asymmetric Y-junctions

An Integrated Mode (de)multiplexer Based on Adiabatic Couplers

Silicon Two-Mode Multi/demultiplexer Based on Tapered Couplers

Ultra-compact and High-Performance Silicon Mode (de)multiplexer Based on a Tapered Bent Asymmetric Directional Coupler

Low-Crosstalk and Low-Loss Mode (de)Multiplexer with 10 Channels

Ultra-broadband and low-modal-crosstalk mode multiplexer based on cascaded vertical directional couplers formed by adiabatic-tapered waveguides without mode conversion

Low-loss and Low-Crosstalk Multi-Channel Mode (de)multiplexer with Ultrathin Silicon Waveguides

Ultra-Compact and Broadband Silicon Two-Mode Multiplexer Based on Asymmetric Shallow Etching on a Multi-Mode Interferometer

Three-mode All-Optical (de)multiplexing on a SOI Chip

Broadband and Scalable Silicon-Based Mode Multiplexer Using Subwavelength-Grating-based Adiabatic Coupler

Silicon Mode Multi/Demultiplexer Based on Multimode Grating-Assisted Couplers

Compact and broadband silicon-based mode-division (de)multiplexer using an asymmetrical directional coupler

Silicon Three-Mode (de)multiplexer Based on Cascaded Asymmetric Y Junctions.

Ultra-compact Mode (de) Multiplexer Based on Subwavelength Asymmetric Y-junction.

On-chip Two-Mode Division Multiplexing Using Tapered Directional Coupler-Based Mode Multiplexer and Demultiplexer.

Two-mode Multiplexer Based on the Multilayer Si-SiN Platform for 2μm Waveband