Abstract:This paper presents a single-ended 8-channel 10-bit 200 kS/s 607 μW synchronous successive approximation register (SAR) analog-to-digital converter (ADC) using HLMC 55 nm low leakage (LL) CMOS technology with a 3.3 V/1.2 V supply voltage. In conventional binary-encoded SAR ADCs the total capacitance grows exponentially with resolution. In this paper a CR hybrid DAC is adopted to reduce both capacitance and core area. The capacitor array resolves 4 bits and the other 6 bits are resolved by the resistor array. The 10-bit data is acquired by thermometer encoding to reduce the probability of DNL errors which are typically present in binary weighted architectures. This paper uses an auto-zeroing offset cancellation technique that can reduce the offset to 0.286 mV. The prototype chip realized the 10-bit SAR ADC fabricated in HLMC 55 nm CMOS technology with a core area of 167 × 87 μm2. It shows a sampling rate of 200 kS/s and low power dissipation of 607 μW operates at a 3.3 V analog supply voltage and a 1.2 V digital supply voltage. At the input frequency of 10 kHz the signal-to-noise-and-distortion ratio (SNDR) is 60.1 dB and the spurious-free dynamic range (SFDR) is 68.1 dB. The measured DNL is +0.37/−0.06 LSB and INL is +0.58/−0.22 LSB.

An 11-bit 200MS/s subrange SAR ADC with charge-compensation-based reference buffer

A 16-Bit 2.5-Ms/s SAR ADC with On-Chip Foreground Calibration

A 15-Bit, 5 MSPS SAR ADC with On-Chip Digital Calibration

An 18-Bit 2MSPS SAR ADC with Double Passive Noise-Shaping Calibration

An 11-Bit 200 MS/s Subrange SAR ADC with Low-Cost Integrated Reference Buffer

A 12-Bit 2.32gs/s Pipelined/sar Hybrid ADC with a High-Linearity Input Buffer.

A 10-bit 200MS/s SAR ADC with reference buffer in 40nm CMOS

A 700-Ms/s 6-Bit SAR ADC with Partially Active Reference Voltage Buffer

A 10-bit 50-MS/s SAR ADC with techniques for relaxing the requirement on driving capability of reference voltage buffers

Charge-Compensation-Based Reference Technique For Switched-Capacitor Adcs

A Low Power Reference Voltage Buffer and High Density Unit Capacitor in a 12b 200ms/s SAR ADC.

An 18-Bit SAR ADC with Mixed DAC and Capacitive Recombination Calibration

A 10-Bit 100-Ms/s SAR ADC with Always-on Reference Ripple Cancellation.

An 8-MS/s 16-bit SAR ADC With Symmetric Complementary Switching and Split Passive Reference Segmentation in 180-nm Process

An 11-Bit 250ms/s Subrange-Sar ADC in 40nm CMOS

An 11-Bit 500 MS/s Two-Step SAR ADC with Non-Attenuated Passive Residue Transfer.

A 12-Bit 50 MS/s Split-CDAC-Based SAR ADC Integrating Input Programmable Gain Amplifier and Reference Voltage Buffer

A 13-Bit 160ms/s Pipelined Subranging-Sar ADC with Low-Offset Dynamic Comparator.

A 1.5MSPS, 120 dB SFDR, ±10 V input range SAR ADC with sampling nonlinearity compensation and inherent 2-b coarse ADC for MSBs decision

A Single-Ended 10-Bit 200 Ks/s 607 Μw SAR ADC with an Auto-Zeroing Offset Cancellation Technique

A Multi-channel 12-Bits 100ms/s SAR ADC in 65nm CMOS