Abstract:This paper presents an efficient 8-MS/s 16-bit successive approximation register (SAR) analog-to-digital converter (ADC) with the proposed symmetric complementary switching (SCS) and split passive reference segmentation (SPRS). Conventionally, improving the SAR ADC speed compromises the signal-to-noise-and-distortion ratio (SNDR) and energy efficiency due to the high precision requirement and the sequential bit-cycling. In this design, the proposed SCS scheme reduces the parasitic capacitance in the sampling path and the settling error of the capacitive digital-to-analog converter (CDAC) with low SNDR and hardware penalties. In addition, to reduce reference ripples, active reference buffers generally consume high power while the passive methods may degrade the SNDR or occupy large areas. To efficiently reduce reference settling errors, an area-efficient SPRS is developed, which suppresses the reference settling error through the split reference segmentation. The prototype chip is fabricated in a 180-nm CMOS process and occupies an area of 0.57 mm2. Measurements show the ADC achieves a peak SNDR of 89.2 dB at 8 MS/s with a 9.5-mW power consumption. The Schreier-figure-of-merit (FoM) is 175.4 dB.

An 11-Bit 200 MS/s Subrange SAR ADC with Low-Cost Integrated Reference Buffer

A 16-Bit 2.5-Ms/s SAR ADC with On-Chip Foreground Calibration

A 10-Bit 250-KS/s 1.24-uW SAR ADC for IoT Sensors with Energy-Efficient Comparator.

A 12-Bit 2.32gs/s Pipelined/sar Hybrid ADC with a High-Linearity Input Buffer.

An 11-Bit 250ms/s Subrange-Sar ADC in 40nm CMOS

An 11-bit 200MS/s subrange SAR ADC with charge-compensation-based reference buffer

A 10-bit 200MS/s SAR ADC with reference buffer in 40nm CMOS

A 700-Ms/s 6-Bit SAR ADC with Partially Active Reference Voltage Buffer

A 10-bit 50-MS/s SAR ADC with techniques for relaxing the requirement on driving capability of reference voltage buffers

A low power 11-bit 100 MS/s SAR ADC IP

A 14-Bit 200ms/s Low-Power Pipelined Flash-Sar ADC.

A 13-Bit 160ms/s Pipelined Subranging-Sar ADC with Low-Offset Dynamic Comparator.

An 11-bit 200MS/s SAR ADC IP for wireless comunacation SOC

An 11 Bit 150 MS/s Sub-range SAR ADC IP for Wireless Transceiver

A 1 V 186-Μw 50-Ms/s 10-Bit Subrange SAR ADC in 130-Nm CMOS Process

A 14b 200MHz power-efficient pipelined flash-SAR ADC

A 12bit Asynchronous SAR-incremental Sub-Range ADC

A 6-Bit 320-Ms/s 2-Bit/cycle Sar Adc with Tri-Level Charge Redistribution

A Low Power 10-Bit 100-Ms/s SAR ADC in 65nm CMOS

An 8-MS/s 16-bit SAR ADC With Symmetric Complementary Switching and Split Passive Reference Segmentation in 180-nm Process

A 10-Bit 100-Ms/s SAR ADC with Always-on Reference Ripple Cancellation.