Abstract:Reliability has become an increasingly important concern for SRAM-based field programmable gate arrays (FPGAs). Targeting SEU (single event upset) in SRAM-based FPGAs, this article first develops an SEU evaluation framework that can quantify the failure sensitivity for each configuration bit during design time. This framework considers detailed fault behavior and logic masking on a post-layout FPGA application and performs logic simulation on various circuit elements for fault evaluation. Applying this framework on MCNC benchmark circuits, we first characterize SEUs with respect to different FPGA circuits and architectures, for example, bidirectional routing and unidirectional routing. We show that in both routing architectures, interconnects not only contribute to the lion's share of the SEU-induced functional failures, but also present higher failure rates per configuration bits than LUTs. Particularly, local interconnect multiplexers in logic blocks have the highest failure rate per configuration bit. Then, we evaluate three recently proposed SEU mitigation algorithms, IPD, IPF, and IPV, which are all logic resynthesis-based with little or no overhead on placement and routing. Different fault mitigating capabilities at the chip level are revealed, and it demonstrates that algorithms with explicit consideration for interconnect significantly mitigate the SEU at the chip level, for example, IPV achieves 61% failure rate reduction on average against IPF with about 15%. In addition, the combination of the three algorithms delivers over 70% failure rate reduction on average at the chip level. The experiments also reveal that in order to improve fault tolerance at the chip level, it is necessary for future fault mitigation algorithms to concern not only LUT or interconnect faults, but also their interactions. We envision that our framework can be used to cast more useful insights for more robust FPGA circuits, architectures, and better synthesis algorithms.

In-Place Lut Polarity Inversion to Mitigate Soft Errors for Fpgas

Mitigating FPGA Interconnect Soft Errors by In-Place LUT Inversion

IPF: In-Place X-Filling to Mitigate Soft Errors in SRAM-Based FPGAs.

Izip: In-Place Zero Overhead Interconnect Protection Via Pip Redundancy

Ipf: In-Place X-Filling Algorithm for the Reliability of Modern Fpgas

Reliability- and Process Variation-Aware Placement for FPGAs

A Soft Error Detection and Recovery Flip-Flop for Aggressive Designs with High-Performance

A Cycle-Accurate Soft Error Vulnerability Analysis Framework for FPGA-based Designs

A MUX Structure Design for Soft Error Mitigation in FPGA

SEU Fault Evaluation and Characteristics for SRAM-based FPGA Architectures and Synthesis Algorithms

A Flexible Soft Error Mitigation Framework Leveraging Dynamic Partial Reconfiguration Technology

A Novel Method for Soft Error Mitigation in FPGA using Adaptive Cross Parity Code

Fault Injection and Failure Analysis on Xilinx 16nm FinFET Ultrascale+ MPSoC

Verification and Automatic Error Injection Method of SEM IP Core for SRAM-Based FPGAs

Radiation Environment-Constrained FPGA Reinforcement Technology and Reliability Research Utilizing Error Control Coding

A Hierarchical Fault Injection System for RISC-V Processors Targeting Single Event Upsets in Flip-Flops

Radiation-tolerant routing algorithm design for FPGAs

PIPBQ Effect Aware SER Analysis for Combinational Logic Circuits

A Novel Layout-Based Single Event Transient Injection Approach to Evaluate the Soft Error Rate of Large Combinational Circuits in Complimentary Metal-Oxide-Semiconductor Bulk Technology

A novel input/output interface circuit with high voltage tolerant and PCI compliant capabilities

A Rapid Scrubbing Technique for SEU Mitigation on SRAM-based FPGAs