Abstract:Field Programmable Gate Arrays (FPGAs) are more prone to be affected by transient faults in presence of radiation and other environmental hazards compared to Application Specific Integrated Circuits (ASICs). Hence, error mitigation and recovery techniques are absolutely necessary to protect the FPGA hardware from soft errors arising due to such transient faults. In this paper, a new efficient multi-bit error correcting method for FPGAs is proposed using adaptive cross parity check (ACPC) code. ACPC is easy to implement and the needed decoding circuit is also simple. In the proposed scheme total configuration memory is partitioned into two parts. One part will contain ACPC hardware, which is static and assumed to be unaffected by any kind of errors. Other portion will store the binary file for logic, which is to be protected from transient error and is assumed to be dynamically reconfigurable (Partial reconfigurable area). Binary file from the secondary memory passes through ACPC hardware and the bits for forward error correction (FEC) field are calculated before entering into the reconfigurable portion. In the runtime scenario, the data from the dynamically reconfigurable portion of the configuration memory will be read back and passed through the ACPC hardware. The ACPC hardware will correct the errors before the data enters into the dynamic configuration memory. We propose a first of its kind methodology for novel transient fault correction using ACPC code for FPGAs. To validate the design we have tested the proposed methodology with Kintex FPGA. We have also measured different parameters like critical path, power consumption, overhead resource and error correction efficiency to estimate the performance of our proposed method.

IPF: In-Place X-Filling to Mitigate Soft Errors in SRAM-Based FPGAs.

In-Place Lut Polarity Inversion to Mitigate Soft Errors for Fpgas

CRC Circuit Design for SRAM-Based FPGA Configuration Bit Correction

Izip: In-Place Zero Overhead Interconnect Protection Via Pip Redundancy

Single event upset mitigation for FDP2008

Design and Verification of Multiple SEU Mitigated Circuits on SRAM-based FPGA System

Fault modeling and characteristics of SRAM-based FPGAs (abstract only).

Radiation Environment-Constrained FPGA Reinforcement Technology and Reliability Research Utilizing Error Control Coding

A Novel Scheme for Application-Dependent Testing of FPGAs

SEE Sensitivity Evaluation for Commercial 16 nm SRAM-FPGA

A New Approach To Detect-Mitigate-Correct Radiation-Induced Faults For Sram-Based Fpgas In Aerospace Application

Implementation of Highly Reliable Convolutional Neural Network with Low Overhead on Field-Programmable Gate Array

Radiation-tolerant routing algorithm design for FPGAs

Study of an Automated Precise SEU Fault Injection Technique

A Flexible Soft Error Mitigation Framework Leveraging Dynamic Partial Reconfiguration Technology

Verification and Automatic Error Injection Method of SEM IP Core for SRAM-Based FPGAs

Zero-Hardened SRAM Cells to Improve Soft Error Tolerance in FPGA

An Architecture Independent Packing Method for LUT-based Commercial FPGA.

Radioresistance Placement Algorithm for FPGA Based on SRAM Structure

An Accurate Fault Location Method Based on Configuration Bitstream Analysis

A Novel Method for Soft Error Mitigation in FPGA using Adaptive Cross Parity Code