Abstract:Lead-free perovskite CaCu3Ti4O12 (CCTO) dielectrics are extremely important candidates for capacitor–varistor dual-function materials. However, their overall success in applications is somewhat controlled by the longstanding issues such as relatively large dielectric loss and insufficiently high electric breakdown field. Herein, we report the success in the preparation of an optimized lead-free (1–x)CaCu3Ti4O12–xSrTiO3 (CCTO–STO) composite system with improved dielectric and nonlinear properties via interface engineering. Interestingly, looking closer at the grain boundaries using transmission electron microscopy, it is found that an obvious interface region with a transition layer of a wrinkled structure is formed between the CCTO matrix phase and STO dopant phase. Significantly, all the composite ceramic samples present high permittivity in the order of about 103 to 104, and the 0.9CCTO–0.1STO composite ceramic sample exhibits a lower dielectric loss of about 0.068 at room temperature and at 1 kHz. Excitingly, the optimized 0.9CCTO–0.1STO composite ceramic sample also exhibits a remarkably elevated breakdown field strength of about 14.03 kV/cm and a large nonlinear coefficient of about 16.11. The improvement in nonlinear properties with a high breakdown field strength and large nonlinear coefficient could be attributed to the interfacial effect in the composite structure, originating from the formation of the transition layer with a wrinkle structure at the interface between CCTO and STO phases. Such effects can result in great electrical heterogeneity caused by the higher resistance of the grain boundary and the enhanced potential barrier at the interface region. The new insights on the formation of the interfacial wrinkle structure near the phase boundaries of the CCTO–STO composite system and their effects on improvement of electrical properties can stimulate future research on lead-free CCTO–STO-based systems toward capacitor–varistor dual-function applications and may offer an effective way to design other lead-free dielectric materials as well.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c13067?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c13067</a>.XRD patterns of STO and CCTO powders, STEM image of interface structure and STEM elements mapping, as well as the corresponding EDS line-scanning results across the interface for the composite samples with x = 0.05, TEM images of a transition layer with the wrinkle structure at the interface region for the sample with x = 0.30, and dielectric constant, dielectric loss, imaginary parts of dielectric constant, and electric modulus as a function of temperature, relaxation activation energy as well as complex impedance plots under different temperature for CCTO–STO composite ceramic samples (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c13067/suppl_file/am0c13067_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

CaCu3Ti4O12 (CCTO) ceramics for capacitor applications

Perspective on dielectric properties of calcium copper titanate ceramics

Enhanced breakdown strength and dielectric loss of Ca1−3x/2EuxCu3Ti4O12 ceramics prepared by polymer pyrolysis

Giant Permittivity Response and Enhanced Nonlinear Electrical Properties in a Novel Perovskite-Like Ceramic with Multiple Elements

Processing influence in the CaCu3Ti4O12 electrical properties

Enhanced dielectric properties and improved thermal stability in TiO 2 -based ceramics by Cu and Nb co-doping

Pressure Induced Dielectric Constant Suppression In Cacu3ti4o12 Ceramics

Research Progress in High Dielectric Constant Ceramic Material CaCu_3Ti_4O_(12)

Calcium copper titanate a perovskite oxide structure: effect of fabrication techniques and doping on electrical properties—a review

Defect engineering in rare-earth-doped SrTiO 3 ceramics: Route to colossal capacitance material up to X9R capacitor standard

Influence of CCTO Doped Amount on Property of BST Capacitor Ceramics Sintered at Low Temperature

Grain-boundary and subgrain-boundary effects on the dielectric properties of CaCu<sub>3</sub>Ti<sub>4</sub>O<sub>12</sub> ceramics

Excellent Capacitor–Varistor Properties in Lead-Free CaCu 3 Ti 4 O 12 –SrTiO 3 System with a Wrinkle Structure via Interface Engineering

Decrease of Dielectric Loss in CaCu3Ti4O12 Ceramics by La Doping

CaCu3Ti4O12 ceramics with giant permittivity prepared by reduction-reoxidation method

A novel route to lower the dielectric loss in CaCu$_{3}$Ti$_{4}$O$_{12}$ ceramics

Grain Boundary Behavior in Varistor-Capacitor Tio2-Rich Cacu3ti4o12 Ceramics

Ultrahigh energy storage performance of a 0.75Bi0.47Na0.47Ba0.06TiO3-0.25CaTi0.8Sn0.2O3 ceramic under moderate electric fields

Effect of TeO2 addition on the dielectric properties of CaCu3Ti4O12 ceramics derived from the oxalate precursor route

The Effect of TiO2 on the Dielectric Performance of ZrO2 and Nb2O5 Pre-Doped CaCu3Ti4O12 Ceramics

Raman and Dielectric Spectra of Cacu3ti3.9o12 Ceramics