Abstract:All-solid-state lithium batteries (ASSLBs) are considered a promising technology for next-generation energy storage systems due to their inherent safety. However, the conventional laboratory-scale ASSLBs reported to date are based on pellet-type structures with thick solid electrolyte layers, leading to challenges related to low energy densities and poor electrochemical performance. In this study, porous adhesive poly(ethylene vinyl acetate) (PEVA) scaffolds and polytetrafluoroethylene (PTFE) binders are utilized to interweave sulfide solid electrolytes into freestanding films with an ultra-low thickness of 40 mu m, high ionic conductivity of 1.1 mS cm-1, and a high tensile strength of 74 MPa. To mitigate the reduction reaction between the PTFE binder and the lithium metal anode, a Li3N-rich solid electrolyte interphase (SEI) in situ on lithium metal is formed, and the assembled symmetric cell shows excellent cycling stability within 800 h at the current density of 0.2 mA cm-2 and room temperature. Additionally, the ASSLBs using oxidatively stable Li2ZrCl5F in the composite cathode and the prepared solid electrolyte film demonstrate exceptional cycling performance and fast-charging capability, with a high cell-level energy density of 354.4 Wh kg-1. The ASSLBs prepared by coupling E-LPSCl film and stable interface design exhibit excellent electrochemical performance and a high cell-level energy density. Porous sticky poly(ethylene vinyl acetate) (PEVA) scaffold and polytetrafluoroethylene (PTFE) are utilized to interweave sulfide solid electrolytes into freestanding films with ultralow thickness, high ionic conductivity, and remarkable mechanical strength. Benefiting from high-performance sulfide film and designed solid electrolyte interphase on Li metal, the assembled symmetric cells and all-solid-state cells displayed excellent cycling stability. image

High-energy all-solid-state lithium batteries enabled by Co-free LiNiO 2 cathodes with robust outside-in structures

High-energy All-Solid-state Lithium Batteries Enabled by Co-free LiNiO2 Cathodes with Robust Outside-in Structures.

LiNi 0.5 Mn 1.5 O 4 Cathode Microstructure for All-Solid-State Batteries.

High-Performance Sulfide All-Solid-State Batteries Enabled by High-Voltage Ni-Rich Cathode with a Conformal and Conductive Protective Layer

Rational Design of an Electron/Ion Dual-Conductive Cathode Framework for High-Performance All-Solid-State Lithium Batteries.

High-Energy and Long-Cycling All-Solid-State Lithium-Ion Batteries with Li- and Mn-Rich Layered Oxide Cathodes and Sulfide Electrolytes

Manipulating Interfacial Nanostructure to Achieve High‐Performance All‐Solid‐State Lithium‐Ion Batteries

Single crystal cathodes enabling high-performance all-solid-state lithium-ion batteries

Surface-modified and sulfide electrolyte-infiltrated LiNi0.6Co0.2Mn0.2O2 cathode for all-solid-state lithium batteries

High areal capacity, long cycle life 4 V ceramic all-solid-state Li-ion batteries enabled by chloride solid electrolytes

Constructing rapid ionic transfer layer to boost the performance of LiCoO2 cathode with high mass loading for all-solid-state lithium battery

A highly utilized and practical lithium-sulfur cathode enabled in all-solid-state batteries

LiAlO2-coated LiNi0.8Co0.1Mn0.1O2 and chlorine-rich argyrodite enabling high-performance all-solid-state lithium batteries at suitable stack pressure

Scalable wet-slurry fabrication of sheet-type electrodes for sulfide all-solid-state batteries and performance enhancement via optimization of Ni-rich cathode coating layer

High Ionic Conductive, Mechanical Robust Sulfide Solid Electrolyte Films and Interface Design for All‐Solid‐State Lithium Metal Batteries

High Performance Single-Crystal Ni-Rich Cathode Modification via Crystalline LLTO Nanocoating for All-Solid-State Lithium Batteries

Surface Engineering Strategy Enables 4.5 V Sulfide-Based All-Solid-State Batteries with High Cathode Loading and Long Cycle Life

Manipulating interfacial stability of LiNi0.5Co0.3Mn0.2O2 cathode with sulfide electrolyte by nanosized LLTO coating to achieve high-performance all-solid-state lithium batterie

Unraveling the interfacial compatibility of ultrahigh nickel cathodes and chloride solid electrolyte for stable all-solid-state lithium batteries

Exploring the Cathode Active Materials for Sulfide-Based All-Solid-State Lithium Batteries with High Energy Density

Enhanced all-solid-state battery performance through in-situ construction of interface modification layer