Abstract:Liquid crystals are widely used in photonics because of their profound electro-optic properties. However, the slow switching speeds (milliseconds) and the fluid nature of liquid crystals restrict their potential use in integrated photonics. In this work, polymer-stabilized liquid crystals are utilized as the functional material to improve the response time with a polymer network that helps pre-orientate the liquid crystal. Additionally, plasmonic slot structures are simultaneously employed to minimize the switch voltage by confining the optical field within the electrode spacing at subwavelength scales. Thanks to the large overlap of the optical and electric fields, the scattering states of the polymer-stabilized liquid crystal can be effectively manipulated to modulate the loss of the propagating wave, resulting in strong optical attenuation in the integrated photonic platform. Specifically, a plasmonic enhanced polymer-stabilized liquid crystal photonic device for operation at 1550 nm, which has a length of only 10 mu m and shows an extinction ratio of 0.38 dB mu m-1, with a power consumption of less than 6 mu W and a response time approximate to 20 mu s, resulting in a figure-of-merit of 0.012 mW. A scheme of on-chip integrated optical attenuators for plasmonic slot waveguide-enhanced electro-optical properties of polymer-stabilized liquid crystal film is proposed. This prototype reduces the response time and improves the modulation efficiency of the liquid crystal-based integrated photonic device, resulting in a compact and energy-efficient platform for on-chip optical modulation. image

Fluorinated Photopolymer Waveguide Thermo-Optic Switches with Loss-Compensation Function Based on Erbium-Containing Cladding Structure.

Fluorinated Photopolymer Thermo-Optic Switch Arrays with Dielectric-Loaded Surface Plasmon Polariton Waveguide Structure

Thermo-optic waveguide gate switch arrays based on direct UV-written highly fluorinated low-loss photopolymer.

Polymer waveguide thermo-optical switch with loss compensation based on NaYF4: 18% Yb3+, 2% Er3+ nanocrystals

Bottom-metal-printed Thermo-Optic Waveguide Switches Based on Low-Loss Fluorinated Polycarbonate Materials

Polymer M-Z Thermal Optical Switch at 532-Nm Based on Wet Etching and UV-Writing Waveguide.

On-chip Integrated Optical Switch Based on Polymer Waveguides

850-Nm Polymeric Waveguide Thermo-Optic Switch with Low Power-Consumption

Plasmonic‐Enhanced Polymer‐Stabilized Liquid Crystals Switching for Integrated Optical Attenuation

Polymer Thermo-Optic Switches with Y-Branch

A vertically coupled polymer optical waveguide switch

Electro-Optic Polymer Assisted Optical Switch Based on Silicon Slot Structure

Three-Dimensional Polymer Thermo-Optic Switch at 650 Nm

A Multimode Interference Polymer-Silica Hybrid Waveguide 2x2 Thermo-Optic Switch

Cross-cascaded AWG-based Wavelength Selective Switching Integrated Module Using Polymer Optical Waveguide Circuits

Thermooptic Switch Based on Photonic-Crystal Line-Defect Waveguides

Polymer Thermal Optical Switch for a Flexible Photonic Circuit

Low Loss Vertically Coupled Polymeric Electro-Optic Switch

Fluorinated Photopolymer Cascaded MMI-based Integrated Optical Waveguide Switching Matrix with Encoding Functions.

Ultra-Broadband Polymer 1 × 2 Thermo-Optic Mode Switch

A 1 × 4 Polymeric Digital Optical Switch Based on the Thermo-Optic Effect