Abstract:This paper addresses the acoustic and aerodynamic characteristics of small rotor configurations, including the influence of the rotor–rotor interactions. For this purpose, a Rotor/Rotor/Pylon configuration is chosen for both the test and numerical simulations. The wind tunnel experiments on various rotor configuration were performed in DLR's Acoustic Wind Tunnel Braunschweig (AWB). The experiments involve isolated rotors, and rotors in tandem and coaxial configuration in hover and forward flight. For numerical simulations, an unsteady free wake 3D panel method (UPM) is used to account for aerodynamic non-linear effects associated with the mutual interference among the Rotor/Rotor/Pylon configurations. The effect of the pylon is simulated using potential theory in form of a panelized body. Finally, the sound propagation into the far field is calculated with DLR's FW–H code APSIM, using UPM blade surface pressure as input. The validation effort is supported by CFD TAU steady simulations on selected hover test cases. The experiments and numerical results indicate that the noise at the blade passing frequency (BPF) and its higher harmonics is the dominant source of the noise for the present rotor selection. The extra subharmonics between two BPFs appearing in the results are caused by the small geometric discrepancy between the blades as well as the motor noise. Broadband noise is also observed in the experiment, but its contribution to the overall sound pressure is very small and can be neglected. The simulation of the acoustic scattering from the rotor support system for the isolated rotor cases indicated an influence about 1–3 dB on the overall sound pressure of the polar microphones. In both the coaxial and the tandem configuration, the acoustic interferences are particularly well visible in the numerical simulations and cause a more complex noise directivity. There is almost no change in time-averaged inflow by applying phase angles. In the coaxial condition, in hover, the phase delay between rotors does not change the maximum noise level. In forward flight, the phase delay can influence the maximum level of the noise radiation. In both coaxial and tandem configuration, the position of the downstream rotor is key for the noise radiation, and therefore, avoiding the interaction with upstream wake can reduce the noise radiation.

Numerical Method to Compute Acoustic Scattering Effect of a Moving Source

Numerical study of acoustic source localization of rotor using a novel discrete noise analysis strategy

Transonic Hovering Rotor Aeroacoustic Predictions Using Navier-Stokes/Kirchhoff Method

A High Efficiency Method for Calculating the Aeroacoustic Noise of Transonic Rotors

Aeroacoustic modeling of helicopter transonic rotor noise

Numerical analyses of aeroacoustic characteristics of tiltrotor considering the aerodynamic interaction by the fuselage in hover

Numerical studies on small rotor configurations with validation using acoustic wind tunnel data

Numerical study on aerodynamic performance of a ducted tail rotor in hover and sideward flight

Numerical Analysis of Aerodynamic Noise Radiated from Cross Flow Fan

Investigation of a Virtual Blade Method for Aerodynamic and Acoustic Prediction of Helicopter Rotors

Numerical analysis on the high-speed impulsive noise propagation characteristic of helicopter rotor in the presence of strong shear flow

Boundary Element Analysis on the Fuselage Scattering of Drone Noise

Research of the Aeroacoustic Noise Simulation Based on Transition/scale-Adapt Model and FW-H Equation

Prediction of helicopter rotor noise in hover using FW-H analogy

Prediction of the aerodynamic noise of an airfoil via the hybrid methods of aeroacoustics

Aeroacoustic Prediction Based on Large-Eddy Simulation and the Ffowcs Williams–Hawkings Equation

Investigation of Rotor Noise Shielding Effects by the Helicopter Fuselage in Forward Flight

Evaluation of different FW-H surfaces and modal decomposition techniques for the acoustic analysis of UAV propellers through detached eddy simulations

An efficient hybrid aeroacoustic method to predict the noise of a ducted coaxial-rotor UAV

Analysis of Blade Noise with Different Root Boundary Conditions Considering Fluid-Structure Interaction Effect

An Improved Boundary Element Method for Predicting Half-Space Scattered Noise Combined with Permeable Boundaries