Design and Analysis of an Always-ON Input-Biased Pa-Current Sub-nW Mv-Threshold Hysteretic Comparator for Near-Zero Energy Sensing.

Aili Wang,Chixiao Chen,Chuanjin Richard Shi

DOI: https://doi.org/10.1109/tcsi.2017.2702063

2017-01-01

IEEE Transactions on Circuits and Systems I Regular Papers

Abstract:This paper describes a comparator capable of detecting mV-range input voltage signals reliably using sub-nW power consumption. The comparator uses a current-mirror-based positive feedback and hysteresis to generate the mV-range threshold. It has three new ideas: (1) to use the input signal to bias the current mirror, which only activates the current mirror when the input signal reaches a detectable threshold; (2) to achieve dynamically controllable detectable threshold by using control signals to adjust the mirror transistor sizes; and (3) to use negative feedback to compensate the process-voltage-temperature variation. Preliminary SPICE simulation results using state-of-the-art 9HP (BiCMOS) have shown that the proposed hysteresis-based comparator can achieve the following performance metrics: 1) Very low comparator threshold (in the range of mV); furthermore, these threshold voltages can be programmable at run-time from a few to tens of mV. 2) Steep equivalent subthreshold slope in the range of sub-mV/decade. 3) Ultra-low leakage power (in the sub-nW range for a 0.1mV input voltage) and switching energy (in the nW range). The proposed hysteresis-based comparator only requires one standard logic supply source (working over 1V to 0.5V). Furthermore, initial simulations have shown that this comparator threshold is reliable over the process and voltage (PV) variations, and linearly proportional to temperature (T) variation.