Abstract:Electromagnetic (EM) wave harvesting and detection have many implications for self-powered human health monitoring and robot intelligence. Heterojunction-based energy harvesters and detectors can convert various forms of energy into electricity. Here, we report a mechanically tunable electromagnetic wave harvester (EMH), operated by quasi-static contact of a metal/indium gallium zinc oxide/metal van der Waals heterojunction. The proposed EMH behaves as a rectenna responding to low-frequency signals (80–400 MHz), where the electrode works as an antenna, the heterojunction between two separated layers works as a rectifying diode, and the parallel structure works as a capacitor. It is found that the pressure on the EMH plays an important role on regulating electronic interfaces and thus the output characteristics. The two output states (on/off states) of the EMH can be reversibly controlled by mechanical pressure. The proposed design and mechanism have been verified by various materials pairings and structures, which proves their great universality. The simple-structure EMH can continuously generate DC power for 10 hours without signal attenuation. It can supply power to a capacitor, a LED and a resistive load inverter, which demonstrates its application potential as an energy source. Moreover, the EMH can work as a sensor to qualitatively detect electromagnetic waves in the ambient environment and pressure. This work has proposed a novel solution to harvest and detect electromagnetic energy by van der Waals heterojunction in a mechanically controllable way, providing new possibilities for wearable electronics, intelligent robots, and Internet of Things.

A High-Precision Ultra-Low-power Hysteretic Voltage Detector for Energy Harvesting System

A HIGH-PRECISION ULTRA-LOW-POWER HYSTERETIC VOLTAGE DETECTOR USING CURRENT-BASED COMPARISON

A Low Temperature Coefficient, High Voltage Detection Circuit Used in Power over Ethernet

A Low Power Continuous Time Hysteresis Comparator with an Average Current Consumption of 614na at 1.5 Voltage

Design and Analysis of an Always-ON Input-Biased Pa-Current Sub-nW Mv-Threshold Hysteretic Comparator for Near-Zero Energy Sensing.

An Energy-Efficient BJT-Based Temperature Sensor with +/- 0.8 degrees C (3 sigma) Inaccuracy from-50 to 150 degrees C

Ultra-Low Power Boost Converter with Constant On-Time-Based Mppt for Energy Harvesting Applications

A Cold-Startup SSHI Rectifier for Piezoelectric Energy Harvesters with Increased Open-Circuit Voltage

30–300mV input, ultra-low power, self-startup DC-DC boost converter for energy harvesting system

A 1.2V Output RF Energy Harvester with a Harvesting-Efficiency Tracking Circuit

A Compact Dickson Hybrid Boost Converter with 5-Mv Input 90.5% Peak Efficiency and On-Chip Cold-Start for Thermoelectric Energy Harvesting

A Dickson Hybrid Boost Converter With On-Chip Cold-Start for Thermoelectric Energy Harvesting.

A High Precision Voltage Reference Circuit for Battery Management System Chip of New Energy Electric Vehicle

Self-powered Wearable Ultraviolet Index Detector Using a Flexible Thermoelectric Generator

A Nail-Size Piezoelectric Energy Harvesting System Integrating a MEMS Transducer and a CMOS SSHI Circuit

Ultra-Low Frequency Eccentric Pendulum-Based Electromagnetic Vibrational Energy Harvester

Self-powered piezoelectric energy harvesting with ultra-low power consumption for low-amplitude ambient vibrations

0.13 μm Low-Power CMOS Current Starved VCO for Vibration Energy Harvesters

A 840- μm 2 low-power all-MOS temperature sensor front-end with real-time voltage calibration

A mechanically tunable electromagnetic wave harvester and dual-modal detector based on quasi-static van der Waals heterojunction

Sub-nA photovoltaic energy harvesting circuit for miniaturized battery-less sensor edges