Abstract:We propose a hierarchical multiscale modeling approach to simulate the hydro-mechanical coupling behavior in saturated high-porosity sandstone, with a particular focus on the occurrence and transition of compaction bands. In this multiscale approach, we use the finite element method (FEM) to solve the global boundary value problem for a sandstone, and the discrete element method (DEM) to solve the local representative volume elements (RVEs) embedded at the Gauss integration points of the FE mesh to provide the effective material constitutive responses required for FEM. The global governing equations for a coupled hydro-mechanical problem are solved with the standard u–p formulation, where the total stress is decomposed into the pore pressure and the effective stress which is directly derivable from the DEM solution of the RVEs, according to the seminal Terzaghi's effective stress principle. By choosing proper RVEs to represent the typical microstructure of high-porosity sandstone, we perform both drained and undrained simulations on saturated sandstone specimens to examine localized compactive failures developed therein. We identify that both mean effective stress and porosity control critically the initiation and development of failure modes in sandstone. Under undrained shear, our simulations show that a sandstone specimen may first develop a compaction band followed by a gradual transition to a shear-enhanced compaction band and even shear band, with the build-up of excessive pore pressure and hence drop of mean effective stress. In the specimen, regions experiencing localized volumetric contraction show relatively higher pore pressure than other regions and act as the source of flux flow. The Darcy flux peaks during the formation of compaction band and decreases gradually in the following stages. To distinguish the different failure stages with distinct physical attributes, the ratio of deviatoric strain to volumetric strain is adopted as a useful indicator signifying the underlying microstructural mechanisms for different deformation bands. This study signifies the importance of considering pore pressure and mean effective stress in fluid-involved engineering operations, e.g. aquifer management, hydrocarbon extraction and CO2 geological sequestration.

Bonding Strength Effects in Hydro-Mechanical Coupling Transport in Granular Porous Media by Pore-Scale Modeling.

Multiscale Modeling and Analysis of Compaction Bands in High-Porosity Sandstones

A Coupled FEM/DEM Approach for Hierarchical Multiscale Modelling of Granular Media

Undrained Cyclic Behavior of Granular Materials Considering Initial Static Shear Effect: Insights from Discrete Element Modeling

Bridging The Micro And Macro For Granular Media: A Computational Multi-Scale Paradigm

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

Diffuse Instability of Granular Material under Various Drainage Conditions: Discrete Element Simulation and Constitutive Modeling

A mesoscale bond model for discrete element modeling of irregular cemented granular materials

A Fully Coupled Hydro-Mechanical Material Point Method for Saturated Dense Granular Materials

Coupled CFD–DEM numerical modelling of perforation damage and sand production in weak sandstone formation

A hypoplastic model for cemented sand under monotonic and cyclic loading

Investigation of the effect of cementing ratio on the mechanical properties and strain location of hydrate-bearing sediments by using DEM

Evaluation of the dynamic behavior of cemented granular soil by the three-dimensional discrete element bonded contact model

Microscopic Mechanism Analysis of Influence of High Effective Confining Pressure on Mechanical Properties of Hydrate-Bearing Sediments

Grain-Level Numerical Simulations for the Effective Elasticity of Weakly Cemented Sandstones

Triaxial Tests and DEM Simulation on Artificial Bonded Granular Materials

Study on the Multiphase Fluid-Solid Interaction in Granular Materials Based on an LBM-DEM Coupled Method

3D DEM modeling of biocemented sand with fines as cementing agents

Experimental and Numerical Studies of Water–Sand Flow in Fractured Porous Media

Characterizing Interfacial Behavior of Structurally Cemented Granular Material Using a Large Three-Dimensional Contact Surface Testing Machine and a Mesoscale Bond Model in DEM

Chemo-mechanical modeling of artificially and naturally bonded soils