Abstract:The prominent performance of wave elimination and energy absorption makes calcareous sand important and useful in infrastructure construction and protection engineering. Due to the high compressibility induced by remarkable intragranular void and irregular shape, calcareous sand presents different mechanical behaviors from common terrestrial sands. Considerable efforts have been made to explore the static and dynamic mechanical properties of calcareous sand. In this paper, a series of monotonous experiments have been performed on calcareous sand utilizing the electrohydraulic servo-controlled test apparatus designed by the Global Digital Systems Ltd (GDS). The effects of confining pressure and relative density on the mechanical properties of dry, drained, and undrained saturated sand were studied, and the underlying micromechanism of deformation and failure was discussed. It can be found that the residual stress of dry calcareous sand is independent of the relative density, while the peak stress and residual stress of drainage saturated sand have a positive correlation with the relative density. The increase of confining pressure makes the strain softening more remarkable and heightens the peak stress and residual stress. The stress-strain curve of calcareous sand can be divided into two portions: prepeak portion and postpeak softening portion. For the dry sand and drainage saturated sand, the softened part can be partitioned into three phases, i.e., accelerated phase, steady phase, and degradation phase, while the undrained saturated sand tends to hyperbolic softening. A mathematical model composed of a hyperbolic function and an inverted S-shaped function was formulated to describe the multiphase characteristic, in which the setting of parameter p expands its applicability. The experimental result validated the model, showing that the model can better describe the monotonic stress-strain relationship of calcareous sand. Besides, the physical meanings of model parameters were discussed.

A hypoplastic model for cemented sand under monotonic and cyclic loading

Hypoplastic Model for Sand under Multidirectional Shearing Conditions Considering Fabric Change Effect

Failure Mechanisms of Sand under Asymmetrical Cyclic Loading Conditions: Experimental Observation and Constitutive Modelling

Non-coaxial hypoplastic model for sand with evolving fabric anisotropy including non-proportional loading

Hypoplastic Modeling of Anisotropic Sand Behavior Accounting for Rotation of Principal Stress Direction

A Hypoplastic Model for Granular Soils Incorporating Anisotropic Critical State Theory

Hypoplastic model with fabric change effect and semifluidized state for post‐liquefaction cyclic behavior of sand

An Anisotropic Egg-Shaped Bounding Surface Model for Saturated Soft Clay

Hypoplastic modeling of anisotropic sand behavior accounting for fabric evolution under monotonic and cyclic loading

A Simple Bounding Surface Elasto-Viscoplasticity Model for Marine Clays under Monotonic and Cyclic Loading

Micromechanics-based multimechanism bounding surface model for sands

A hypoplastic model for sand-fines mixtures

A unified monotonic model for sand based on modified hyperbolic equation and state-dependent dilatancy

A hypoplastic model for hydrate‐bearing sand considering hydrate saturation and grain breakage

A State-Dependent Constitutive Model for Gas Hydrate-Bearing Sediment Incorporating Phase Change

A hypoplastic model for unsaturated sand accounting for drying and wetting cycles

Degradation effect of seawater on the long-term dynamic behavior of artificially cemented sand

Experimental and Mathematical Modeling of Monotonic Behavior of Calcareous Sand

A State-Dependent Elasto-Plastic Model for Hydrate-Bearing Cemented Sand Considering Damage and Cementation Effects

A Hypoplastic Model of Gravelly Soil Considering Physical State

Development of a modified hypoplastic model for calcareous sand considering particle crushing