Abstract:We propose a hierarchical multiscale modeling approach to simulate the hydro-mechanical coupling behavior in saturated high-porosity sandstone, with a particular focus on the occurrence and transition of compaction bands. In this multiscale approach, we use the finite element method (FEM) to solve the global boundary value problem for a sandstone, and the discrete element method (DEM) to solve the local representative volume elements (RVEs) embedded at the Gauss integration points of the FE mesh to provide the effective material constitutive responses required for FEM. The global governing equations for a coupled hydro-mechanical problem are solved with the standard u–p formulation, where the total stress is decomposed into the pore pressure and the effective stress which is directly derivable from the DEM solution of the RVEs, according to the seminal Terzaghi's effective stress principle. By choosing proper RVEs to represent the typical microstructure of high-porosity sandstone, we perform both drained and undrained simulations on saturated sandstone specimens to examine localized compactive failures developed therein. We identify that both mean effective stress and porosity control critically the initiation and development of failure modes in sandstone. Under undrained shear, our simulations show that a sandstone specimen may first develop a compaction band followed by a gradual transition to a shear-enhanced compaction band and even shear band, with the build-up of excessive pore pressure and hence drop of mean effective stress. In the specimen, regions experiencing localized volumetric contraction show relatively higher pore pressure than other regions and act as the source of flux flow. The Darcy flux peaks during the formation of compaction band and decreases gradually in the following stages. To distinguish the different failure stages with distinct physical attributes, the ratio of deviatoric strain to volumetric strain is adopted as a useful indicator signifying the underlying microstructural mechanisms for different deformation bands. This study signifies the importance of considering pore pressure and mean effective stress in fluid-involved engineering operations, e.g. aquifer management, hydrocarbon extraction and CO2 geological sequestration.

A hypoplastic model for hydrate‐bearing sand considering hydrate saturation and grain breakage

Hypoplastic Model for Sand under Multidirectional Shearing Conditions Considering Fabric Change Effect

Multiscale Modeling and Analysis of Compaction Bands in High-Porosity Sandstones

A State-Dependent Constitutive Model for Gas Hydrate-Bearing Sediment Incorporating Phase Change

A Hypoplastic Model for Granular Soils Incorporating Anisotropic Critical State Theory

A hypoplastic model for crushable sand under a wide range of stress levels

A Hypoplastic Constitutive Model for Granular Materials with Particle Breakage

Development of a modified hypoplastic model for calcareous sand considering particle crushing

A hypoplastic model for cemented sand under monotonic and cyclic loading

A hypoplastic model considering grain breakage and wetting effect for granular material

A State-Dependent Elasto-Plastic Model for Hydrate-Bearing Cemented Sand Considering Damage and Cementation Effects

Micromechanics-based multimechanism bounding surface model for sands

An extended hypoplastic constitutive model considering particle breakage for granular material

A hypoplastic model for unsaturated sand accounting for drying and wetting cycles

A State-Dependent Constitutive Model for Coarse-Grained Gassy Soil and Its Application in Slope Instability Modelling

A unified monotonic model for sand based on modified hyperbolic equation and state-dependent dilatancy

A constitutive model for crushable sands involving compression and shear induced particle breakage

A hypoplastic model for sand-fines mixtures

Application and Improvement of a Stress Partition Framework-Based Methane Hydrate-Bearing Sediment Constitutive Model for Wide Range Confining Stress

A bounding surface plasticity model for methane hydrate-bearing sediments in deep seabed

Hypoplastic model with fabric change effect and semifluidized state for post‐liquefaction cyclic behavior of sand