Abstract:Metal oxide modified nickel catalysts are highly desirable for the conversion of biomass-derived compounds to biofuels and valuable chemicals because of their low-cost and unique synergistic effects in catalytic reaction. Herein, a series of metal oxide modified nickel catalysts were scrutinized in the hydrodeoxygenation of steatic acid to diesel-range alkanes without any carbon loss as a model reaction. The results showed that MoOx modified Ni/SiO2 catalyst was the most active and selective for the hydrodeoxygenation of stearic acid under mild reaction conditions (260 °C and 3.0 MPa H2 partial pressure). The catalyst with an Ni/Mo molar ratio of 1, and that was reduced at an optimized temperature (500 °C), exhibited the best performance; this catalyst achieved a high selectivity (>95%) to diesel-range alkanes at 100% stearic acid conversion. A high selectivity (>60%) to C18 alkane and a less than 30% selectivity to C17 alkane were observed at 260 °C and 3.0 MPa H2 partial pressure. By selecting an appropriate support, the selectivity to C18 alkane can reach 95% at 100% stearic acid conversion over Ni–Mo/H-ZSM-5 catalysts. In contrast to Ni/SiO2, Ni–Mo/SiO2 was more efficient for CO hydrogenation and less active for C–C bond cleavage, which afforded a higher selectivity to long-chain hydrocarbons without any carbon loss. Detailed characterization, control experiments, and kinetic studies indicate that the high activity and selectivity to the C18 alkane arises from a synergy between Ni and MoOx. The Ni sites at the interface between the Ni metal and MoOx species play a role in the generation of hydride (Hδ−) species from H2 dissociation, and MoOx plays a role in promotion of fatty acids adsorption through adsorbing carboxylic groups at the oxygen vacancy of MoOx. The deep understanding of such synergic catalysis will provide significant clues for the rational design of bimetallic catalysts towards the production of diesel-range alkanes without any carbon loss from the hydrodeoxygenation of fatty acids/esters.

Re metal addition promotes the stability of catalytic fatty acid conversion over Ni-Fe catalysts

Highly Efficient N-Doped Carbon-Supported Subnanometer Cobalt–Zinc Bimetallic Catalysts for Decarbonylation of Fatty Acids into Long-Chain Olefins

Selective Decarbonylation of Fatty Acids over the PtCo3Nx@NC Catalyst to Produce Long-Chain Olefins

Efficient and Stable Cu-Ni/ZrO2 Catalysts for in Situ Hydrogenation and Deoxygenation of Oleic Acid into Heptadecane Using Methanol As a Hydrogen Donor

Hydrodecarboxylation of fatty acids into liquid hydrocarbons over a commercial Ru/C catalyst under mild conditions

Preparation of Reduced Ni-Nb-O Composite Hydrogenation Catalysts for Highly Selective Conversion of Free Fatty Acids to N-Alkanes

Efficient low-temperature hydrogenation of fatty acids to fatty alcohols and alkanes on a Ni-Re bimetallic catalyst: The crucial role of NiRe alloys

Graphitic carbon embedded FeNi nanoparticles for efficient deoxygenation of stearic acid without using hydrogen and solvent

Bimetallic Rex-Ru/C catalyst for fatty acid esters to diesel-range alkanes under low temperature

Enhancement of fatty acids hydrodeoxygenation selectivity to diesel-range alkanes over the supported Ni-MoOx catalyst and elucidation of the active phase

ReOx promotes Ni cluster interactions on TiO2 to improve the activity and durability for green alkane and alcohol production at low temperature

Hydrothermal catalytic conversion of oleic acid to heptadecane over Ni/ZrO2

Surface synergistic effects of ReNi alloy and ReO x for promoting hydrodeoxygenation of lauric acid to value-added products

Enhanced ruthenium selectivity for the conversion of FAMEs to diesel-range alkanes by surface decoration of FeO x species

Catalytic Deoxygenation of C18 Fatty Acid over Supported Metal Ni Catalysts Promoted by the Basic Sites of ZnAl2O4 Spinel Phase

Insight into the noble-metal-free NiCoAl catalyst boosting the reductive esterification of furancarboxylic acid to methyl 2-tetrahydrofuroate

Fe-promoted Ni catalyst with extremely high loading and oxygen vacancy for lipid deoxygenation into green diesel

Green diesel-like hydrocarbon production by H2-free catalytic deoxygenation of oleic acid via Ni/MgO-Al2O3 catalysts: Effect of the metal loading amount

Preparation of Metal-Acid Bifunctional Catalyst Ni/Zsm-22 for Palmitic Acid Catalytic Deoxygenation

Improved Catalytic Upgrading of Simulated Bio-Oil Via Mild Hydrogenation over Bimetallic Catalysts

Efficient Hydrogenation of Stearic Acid over Carbon Coated Ni-Fe Catalyst