Abstract:Global carbon dioxide emissions are rising and the use of fossil fuels in several sectors are the leading causes. As global population and economies continue to grow significantly, the most practical method of lowering such emissions is to capture CO2. Although other technologies are more developed, adsorption is very promising and has attracted much attention. To ensure this technology's success, it is essential to have suitable CO2 adsorbent materials. In this work, several new hydrotalcites (HTs) with different initial concentrations of ion precursors were prepared for the first time by the co-precipitation method—it was possible to verify that the ion concentrations influence the characteristics of the materials. The prepared HTs were characterized by thermogravimetric analysis (TG), X-Ray diffraction (XRD), surface area measurements and temperature-programmed desorption of CO2 (TPD-CO2) to relate their CO2 capture capacity to their physicochemical properties; the CO2 adsorption equilibrium isotherms were determined at 35 and 300 °C for the prepared samples, as well as for some commercial materials: magnesium oxide, calcium oxide, aluminium oxide and Zeolite 13X. After determining which materials present the best CO2 adsorption capacity, these were submitted to adsorption-desorption cycles to study their stability. The main objective of the work was to prepare and study different CO2 adsorbents for processes that are carried out at low and intermediate temperatures. From the experimental results, it was possible to conclude that the Zeolite 13X showed the best capacity at 35 °C, 3.38 mmol·g−1 (@= 1 bar), and a prepared calcined HT (c-HT2) was the best at 300 °C, 0.97 mmol·g−1 (@= 1 bar). Moreover, it seems there is an optimum initial concentration of the ions' solutions for the tested HTs, which depends on the final application—c‐HT1 showed a better capacity at 35 °C and c‐HT2 at 300 °C. From the adsorption‐desorption cycles—performed at 35 and 300 °C with the best materials using a magnetic suspension microbalance at 1 bar of CO2 partial pressure —, a working cyclic capacity of 2.69 mmol∙g−1 was achieved by the Zeolite at 35 °C; in turn, c-HT2 showed a working cyclic capacity of 0.79 mmol∙g−1 at 300 °C.

Comparison of the kinetic of carbon dioxide adsorption in materials containing calcium, zirconium, and tin

Modified Kinetics Model of Nano CaO Reactions with CO2 in a CaO-Based Adsorbent

Properties of a Nano CaO/Al2O3 CO2 Sorbent

Adsorption Properties of Coating Modified Nano CaO-Based CO2 Adsorbents

The effect of BeO on heat transfer and durability of nano-CaO-based CO<sub>2</sub> adsorbents

Properties of Ca-Base Co2 Sorbent Using Ca(Oh)(2) As Precursor

Properties of a Nano CaO/Al<sub>2</sub>O<sub>3</sub>CO<sub>2</sub>Sorbent

Behavior of CaTiO3/Nano-CaO As a CO2 Reactive Adsorbent

High-temperature CO 2 adsorption on Li XZr YO Z ceramics

Experimental Analysis and Evaluation on the CO2 Adsorption Performance of Modified CaO-based Adsorbents Doped with High Aluminum Cement in Different Reactors

Experiment and Kinetic Model Study on Modified Potassium-Based CO2 Adsorbent

Synthesis of Sodium Carbonate Based Solid Adsorbents and Their CO2 Adsorption Performance

High-temperature CO 2 sorbents with citrate and stearate intercalated Ca–Al hydrotalcite-like as precursor

Adsorption kinetics of CO2, CO, N2 and CH4 on zeolite LiX pellet and activated carbon granule

Preparation and Characterization of Materials for Low- to Intermediate-Temperature CO2 Adsorption

High-pressure Carbon Dioxide Adsorption Kinetics of Potassium-Modified Hydrotalcite at Elevated Temperature

Study on CO2 Capture Performance by Potassium-Promoted MgAl-Hydrotalcite Adsorbent

Experiments and DFT study on modified CaO-based adsorbents for enhanced CO<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:msub><mml:mrow /> <mml:mn>2</mml:mn> </mml:msub></mml:math> capture

Experiments and DFT study on modified CaO-based adsorbents for enhanced CO<sub>2</sub> capture

Enhancement of CO2 Adsorption Performance on Hydrotalcites Impregnated with Alkali Metal Nitrate Salts and Carbonate Salts

Recent Advances on Kinetics of Carbon Dioxide Capture Using Solid Sorbents at Elevated Temperatures