Abstract:Based on the influence of a filamentous laser Gaussian heat source and its movement speed on Polymeric Methyl Methacrylate materials (PMMA sheets), the physical model of heat transfer of PMMA materials by CO2 continuous laser ablation was established. Numerical simulation research on heat transfer in CO2 continuous laser processing of PMMA sheets was carried out by applying the heat transfer model, and experiments on continuous laser processing of PMMA sheets were conducted on the basis of the numerical simulation results. Theoretical and experimental research indicated that under relevant conditions, when the laser power was 20 W, the maximum surface temperature of PMMA sheet was approximately 520 K, which was higher than the melting temperature of the PMMA material, achieving the transformation of the PMMA material from solid to liquid phase in the laser ablation area. When the laser power was 40 W, the CO2 continuous laser could vaporize the PMMA material, cracking the polymer structure of polymethyl methacrylate. When the laser power was 80 W, the maximum surface temperature of the PMMA sheet was approximately 1300 K, and the processing efficiency of CO2 continuous laser ablation of the PMMA material was the highest. The above research provided theoretical guidance and process optimization for the research of CO2 continuous laser ablation of PMMA sheets. The consistency between the experimental results and the numerical simulation results demonstrated the correctness and feasibility of the theoretical model, which has certain universality and reference value for the optimization research of laser processing non-metallic materials and polymer materials.

Mathematical Modelling and Simulation Research of Thermal Engraving Technology Based on PMMA Material.

Dynamic Interface for Three-Dimensional Transient Laser Ablation Polymer Microchannels

Transient Ablation Model for Laser Machining Polymer Microfluidic Chip

3d Finite Element Modeling Of Laser Machining Pmma

Three-dimensional numerical simulation for high speed milling of aerospace aluminum alloy

Simulation of High-Speed Milling Process of Aerospace Aluminum Alloy

Experimental Research on CO_2 Laser Direct-writing Machining PMMA Microchannel

Research on Modeling of Hot Embossing Polymeric Microfluidic Chip

Research on Heat Transfer for Hot Embossing of Polymeric Microfluidic Chips

A Non-Photolithography Fabrication For A Microfluidic Chip Based On Pmma Polymer

Numerical Model of Jet Formation During Melt Electrowriting for Fabrication of Precise Structures

Heating Carve Technique for Polymer Microfluidic Microchannel

An Accurate Thermomechanical Model for Laser-Driven Microtransfer Printing

The Interface Thermal Resistance Evolution between Carbide-Bonded Graphene Coating and Polymer in Rapid Molding for Microlens Array

Thermo-Fluid-Dynamic Modeling of the Melt Pool During Selective Laser Melting for AZ91D Magnesium Alloy

Optimizing laser-based micro-cutting for PMMA microfluidic device fabrication: thermal analysis and parameter optimization

Research and application of surface heat treatment for CO2 continuous laser ablation of polymeric methyl methacrylate materials

Mathematical model of laser material processing

Thermal modeling of PMMA microfluidic separation chips

Numerical simulation at the micro-scale for the heat transfer modelling in the thermoplastic composites laser-assisted AFP process

Investigations of the Laser Ablation Mechanism of PMMA Microchannels Using Single-Pass and Multi-Pass Laser Scans