Abstract:The merit of high energy density endows the lithium sulfide (Li2S)-based lithium–sulfur batteries (LSBs) as a promising candidate for next-generation energy storage batteries. In this work, Li2S is chemically anchored onto the surface of two-dimensional graphene oxide (GO), which is then tangled and connected by one-dimensional carbon nanotube (CNT) to promote electron transfer, and finally further embedded with PANI-derived carbon (PDC) to suppress a polysulfide shuttle. The deliberately designed carbon matrix offers a fast electron and ion transfer route, suitable surface area, void volume, and pore size for redox reactions and polysulfide confinement. Furthermore, PDC could synergistically immobilize polysulfides inside the cathode by means of chemisorption so as to restrain the shuttle effect in LSBs. Last but not least, PDC with a quinone-based structure could function as a redox mediator (RM) to facilitate Li2S oxidation with minimized polarization. Benefited from the aforementioned advantages, the as-fabricated Li2S-GO/CNT/PDC composite, which is coupled with a lithium metal as the anode, delivers initially a high specific capacity of 925 mAh g–1 at 0.1 C and good retention capability of 550 mAh g–1 after 400 cycles at 2 C. Therefore, the good electrochemical behavior of the Li2S-GO/CNT/PDC composite suggests its promising prospects for the commercial application of LSBs in high-energy storage devices.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c06310?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c06310</a>.Figure S1, Tafel slope analysis of Li2S-GO/CNT/PDC (red) and Li2S-GO/CNT (blue) for the first CV cycle; Figure S2, cycling performance of Li2S-GO/CNT/PDC with an areal loading of 3.1 mg cm–2 at 0.2 C; Figure S3, FESEM images of the separators of the Li–S cells before and after cycling, the separator before cycling, the separator of Li2S-GO/CNT after cycling, and the separator of Li2S-GO/CNT/PDC after cycling; Figure S4, EIS spectra of Li2S-GO/CNT (blue) and Li2S-GO/CNT/PDC (red) after cycling; and Table S1, recent literature on the electrochemical performance of redox mediator-aided LSBs (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c06310/suppl_file/sc0c06310_si_001.pdf">PDF</a>)(<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c06310/suppl_file/sc0c06310_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Lithium Bond-Enhanced Capacity of Dipyridyl Polysulfides for LSBs

Long-chain Solid Organic Polysulfide Cathode for High-Capacity Secondary Lithium Batteries

A Novel Strategy for High-Stability Lithium Sulfur Batteries by in Situ Formation of Polysulfide Adsorptive-Blocking Layer

Insight into Chemical Reduction and Charge Storage Mechanism of 2,2'-Dipyridyl Disulfide toward Stable Lithium-Organic Battery

Strong Lithium Polysulfide Chemisorption on Electroactive Sites of Nitrogen-Doped Carbon Enables High-Performance Lithium-Sulfur Battery Cathodes

ZnS-SnS@NC Heterostructure as Robust Lithiophilicity and Sulfiphilicity Mediator toward High-Rate and Long-Life Lithium–Sulfur Batteries

Performance Enhancement of A Sulfur/Carbon Cathode by Polydopamine As an Efficient Shell for High-Performance Lithium-Sulfur Batteries

High-Capacity, Sustainable Lithium–Sulfur Batteries Based on Multifunctional Polymer Binders

Dual taming of polysufides by phosphorus-doped carbon for improving electrochemical performances of lithium–sulfur battery

Inhibition of Polysulfides Dissolution and Shuttling by Solid Electrolyte and Macro-Structural Cathode for Lithium-Sulfur Batteries

Synergistic Effect of Lactam and Pyridine Nitrogen on Polysulfide Chemisorption and Electrocatalysis in Lithium Sulfur Batteries

Enhanced Polysulfide Regulation <i>via</i> Porous Catalytic V<sub>2</sub>O<sub>3</sub>/V<sub>8</sub>C<sub>7</sub> Heterostructures Derived from Metal-Organic Frameworks toward High-Performance Li-S Batteries

Boosting the Electrochemical Performance of Li-S Batteries with a Dual Polysulfides Confinement Strategy

Li 2 S In Situ Grown on Three-Dimensional Porous Carbon Architecture with Electron/Ion Channels and Dual Active Sites as Cathodes of Li–S Batteries

Facilitation polysulfides adsorption/catalysis by nitrogen/phosphorous co-doped carbon nanofibers networks for advanced lithium/polysulfides batteries

Dual-heterostructures decorated interweaved carbon nanofibers sulfur host for high performance lithium-sulfur batteries

Activating redox kinetics of polysulfides within edge-rich nitrogen doped porous interconnected carbon nanosphere

Polyaniline-Derived Carbon Heterostructure as Redox Mediator of Li 2 S Oxidation and Polysulfide Immobilizer for High-Performance Lithium–Sulfur Cathode

3D Porous Spherical Sulfur/Carbon Cathode Materials with in Situ Vapor-Phase Polymerized Polypyrrole Coating Layer for High-Performance Lithium–Sulfur Batteries

An Entangled Cobalt–Nitrogen–Carbon Nanotube Array Electrode with Synergetic Confinement and Electrocatalysis of Polysulfides for Stable Li–S Batteries

Kinetically Enhanced Electrochemical Redox of Polysulfides on Polymeric Carbon Nitrides for Improved Lithium-Sulfur Batteries.