Abstract:Driven by intriguingly high energy density up to 2600 Wh/kg, lithium sulfur (Li–S) battery is considered as one of the most promising energy storage devices compared with conventional lithium ion battery. The main obstructions plaguing Li–S batteries associated with the electrical resistivity of sulfur/lithium sulfides, the dissolution of polysulfides in ether-based electrolyte and the large volume variation, result in poor cycling performance and rate capability. Here, we develop a polymer optimized cathode that is polydopamine layer coated on the surface of sulfur loaded hierarchical porous graphitic carbon composites (HPGC-S-PD) by a simple in-situ polymerization method toward the highly suppressed shuttle effect, thus the significantly improved cell performance. Attributed to the superiorities of the structure engineering including the strengthened polysulfide trapping, accelerated ionic conductivity and stable electrode construction, this cathode can deliver an excellent cycling performance over 700 cycles at 1 C, a high areal capacity of 7.25 mAh/cm2 with raised sulfur loading as high as 5.15 mg/cm2. Meanwhile, the obtained cathode can work well with a lower E/S ratio compared with the non-coated cell, which suggests the immense possibility for yielding a practically Li–S battery with high energy density based on this electrode architecture. Strikingly, the pouch cell with optimized cathode material can realize an energy density of 272 Wh/kg after 40 cycles at 0.1 C. This rational design of sulfur cathode combining HPGC with polymer coating by a scalable strategy provides a comprehensive understanding of the structural engineering for sulfur cathodes in pursuit of practically high performance Li–S batteries.

Performance Enhancement of A Sulfur/Carbon Cathode by Polydopamine As an Efficient Shell for High-Performance Lithium-Sulfur Batteries

Palladium nanocrystals-imbedded mesoporous hollow carbon spheres with enhanced electrochemical kinetics for high performance lithium sulfur batteries

A Nitrogen/Oxygen Dual-Doped Porous Carbon with High Catalytic Conversion Ability Toward Polysulfides for Advanced Lithium–Sulfur Batteries

Bimetallic Nanoparticles Decorated Porous Carbon As the Host Material to Enhance the Performance of Lithium-Sulfur Batteries

Surface-coated AlF3 Nanolayers Enable Polysulfide Confinement Within Biomass-Derived Nitrogen-Doped Hierarchical Porous Carbon Microspheres for Improved Lithium-Sulfur Batteries

Strategy for practically constructing high-capacity sulfur cathode by combining sulfur-hierarchical porous graphitic carbon composite with surface modification of polydopamine

A Synergistic Strategy with 3D Highly Conductive Carbon Matrix‐Decorated with Low Loading of CdS Quantum Dots as a Sulfur Host for Advanced Li−S Batteries

In-situ constructing cathode protective film toward high performance of Li-S batteries at high sulfur loadings

Stable lithium-sulfur batteries with high sulfur content fabricated by ultralight ochroma lagopus-derived carbon with dopamine shell as sulfur host

Flexible and Self-Supported Sulfur Cathode for High-Energy-Density Lithium-Sulfur Batteries

Cobalt-Based Double Catalytic Sites on Mesoporous Carbon as Reversible Polysulfide Catalysts for Fast-Kinetic Li–S Batteries

A sulfur-rich copolymer hybrid cathode for anchoring polysulfides and accelerating redox reaction in lithium sulfur batteries

Dual taming of polysufides by phosphorus-doped carbon for improving electrochemical performances of lithium–sulfur battery

A universal performance-enhancing method for Li-S batteries: the cathode material of Li2S@Li2S2@Li2S6 double-shell structure

Accelerating electrochemical reactions in Li-S batteries through better dispersion of sulfur and the robust catalytic effect upon the vanadium nitride decorated hollow carbon spheres

Boosting the Electrochemical Performance of Li-S Batteries with a Dual Polysulfides Confinement Strategy

Enhanced Adsorption of Polysulfides on Carbon Nanotubes/Boron Nitride Fibers for High-Performance Lithium-Sulfur Batteries

Nickel–Cobalt Double Hydroxide As a Multifunctional Mediator for Ultrahigh‐Rate and Ultralong‐Life Li–S Batteries

Integration of nickel phosphide nanodot-enriched 3D graphene-like carbon with carbon fibers as self-supported sulfur hosts for advanced lithium sulfur batteries

Phosphotungstic acid decorated free-standing electrode accelerates polysulfides conversion for high-performance flexible Li S batteries

Facilitation polysulfides adsorption/catalysis by nitrogen/phosphorous co-doped carbon nanofibers networks for advanced lithium/polysulfides batteries