Abstract:Driven by intriguingly high energy density up to 2600 Wh/kg, lithium sulfur (Li–S) battery is considered as one of the most promising energy storage devices compared with conventional lithium ion battery. The main obstructions plaguing Li–S batteries associated with the electrical resistivity of sulfur/lithium sulfides, the dissolution of polysulfides in ether-based electrolyte and the large volume variation, result in poor cycling performance and rate capability. Here, we develop a polymer optimized cathode that is polydopamine layer coated on the surface of sulfur loaded hierarchical porous graphitic carbon composites (HPGC-S-PD) by a simple in-situ polymerization method toward the highly suppressed shuttle effect, thus the significantly improved cell performance. Attributed to the superiorities of the structure engineering including the strengthened polysulfide trapping, accelerated ionic conductivity and stable electrode construction, this cathode can deliver an excellent cycling performance over 700 cycles at 1 C, a high areal capacity of 7.25 mAh/cm2 with raised sulfur loading as high as 5.15 mg/cm2. Meanwhile, the obtained cathode can work well with a lower E/S ratio compared with the non-coated cell, which suggests the immense possibility for yielding a practically Li–S battery with high energy density based on this electrode architecture. Strikingly, the pouch cell with optimized cathode material can realize an energy density of 272 Wh/kg after 40 cycles at 0.1 C. This rational design of sulfur cathode combining HPGC with polymer coating by a scalable strategy provides a comprehensive understanding of the structural engineering for sulfur cathodes in pursuit of practically high performance Li–S batteries.

Phosphotungstic acid decorated free-standing electrode accelerates polysulfides conversion for high-performance flexible Li S batteries

Palladium nanocrystals-imbedded mesoporous hollow carbon spheres with enhanced electrochemical kinetics for high performance lithium sulfur batteries

A Nitrogen/Oxygen Dual-Doped Porous Carbon with High Catalytic Conversion Ability Toward Polysulfides for Advanced Lithium–Sulfur Batteries

Surface-coated AlF3 Nanolayers Enable Polysulfide Confinement Within Biomass-Derived Nitrogen-Doped Hierarchical Porous Carbon Microspheres for Improved Lithium-Sulfur Batteries

Phosphorous Pentasulfide As A Novel Additive for High-Performance Lithium-Sulfur Batteries

Facilitation polysulfides adsorption/catalysis by nitrogen/phosphorous co-doped carbon nanofibers networks for advanced lithium/polysulfides batteries

Efficiently Immobilizing and Converting Polysulfide by a Phosphorus Doped Carbon Microtube Textile Interlayer for High-Performance Lithium-Sulfur Batteries

Highly Stable Lithium–Sulfur Batteries Achieved by a SnS/Porous Carbon Nanosheet Architecture Modified Celgard Separator

Performance Enhancement of A Sulfur/Carbon Cathode by Polydopamine As an Efficient Shell for High-Performance Lithium-Sulfur Batteries

Enhanced Polysulfide Regulation <i>via</i> Porous Catalytic V<sub>2</sub>O<sub>3</sub>/V<sub>8</sub>C<sub>7</sub> Heterostructures Derived from Metal-Organic Frameworks toward High-Performance Li-S Batteries

Strategy for practically constructing high-capacity sulfur cathode by combining sulfur-hierarchical porous graphitic carbon composite with surface modification of polydopamine

Flexible and Self-Supported Sulfur Cathode for High-Energy-Density Lithium-Sulfur Batteries

Multifunctional transitional metal-based phosphide nanoparticles towards improved polysulfide confinement and redox kinetics for highly stable lithium-sulfur batteries

Dual taming of polysufides by phosphorus-doped carbon for improving electrochemical performances of lithium–sulfur battery

Synergistic tungsten oxide/N, S co-doped carbon nanofibers interlayer as anchor of polysulfides for high-performance lithium-sulfur batteries

Free-Standing Sulfur Cathodes Enabled by a Cationic Polymer for Lean Electrolyte Lithium–Sulfur Batteries

Activating redox kinetics of polysulfides within edge-rich nitrogen doped porous interconnected carbon nanosphere

Phosphor-Doped Carbon Network Electrocatalyst Enables Accelerated Redox Kinetics of Polysulfides for Sodium-Sulfur Batteries

Linear-PEI-Derived Hierarchical Porous Carbon Nanonet Flakes Decorated with MoS2 As Efficient Polysulfides Stabilization Interlayers for Lithium–Sulfur Battery

Efficient Activation of Li2S by Transition Metal Phosphides Nanoparticles for Highly Stable Lithium–Sulfur Batteries

Rational design of bidirectional electrocatalysts and accelerated sulfur redox reactions in lithium-sulfur batteries