Abstract:Aiming to the complexity of melt flow in microcellular injection molding caused by multiphase intercoupling, this study explores the nonlinear and strong coupling relationship between process parameters and crystallinity. By optimizing molding parameters to regulate crystallinity, the mechanical properties are enhanced. Furthermore, a multivariate nonlinear regression model is developed to further improve the macroscopic mechanical properties of foamed products. Microcellular injection molding (MIM) is a pivotal technique for lightweight molding. Polypropylene (PP) is widely used in MIM due to light weight and easy processing. The crystallinity of foamed PP products influences the load‐bearing structures and consequently mechanical properties. To address the deterioration of mechanical properties caused by internal porous structure, a novel method is proposed to regulate the crystallinity by optimizing process parameters, thereby improving mechanical properties. Wide‐angle x‐ray diffraction, mechanical testing, and melt flow simulation are applied to investigate the influence of process parameters on crystallinity and mechanical properties. Parameters are further optimized by establishing a multivariate nonlinear regression model for process parameters and crystallinity. The results show that increasing melt temperature, injection rate, mold temperature, and cooling time stimulate crystallization, enhancing strength and decreasing elongation at break. Conversely, high injection ratio of supercritical fluid obstructs crystallization, reducing strength, and increasing elongation at break. The crystallinity increases by 20.81%; the corresponding tensile, flexural, and shear strength and corresponding modulus increases by 5.39% and 10.28%, 7.60% and 18.50%, 5.00% and 11.37%, and elongation at break decreased by 5.19% through the optimization of regression model. The proposed method is feasible to upgrade the mechanical properties of foamed PP products.

Morphology and properties of PC/ABS notebook computer shell prepared by a combined in-mold decoration and microcellular injection molding process

Effect of Films on In‐Mold Decoration and Microcellular Foaming Injection Molding Parts: Cell Structure, Surface, Warpage, and Mechanical Properties

Investigation of film–substrate interfacial characteristics of polymer parts fabricated via in-mold decoration and microcellular injection molding process

Effect of inorganic nanoparticles on polypropylene in‐mold decoration and microcellular foaming injection molding composites

The Cellular Structure and Mechanical Properties of Polypropylene/Nano-CaCO3/Ethylene-propylene-diene-monomer Composites Prepared by an In-Mold-Decoration/Microcellular-Injection-Molding Process

Core-Shell Particles Of Poly(Methyl Methacrylate)-Block-Poly(N-Butyl Acrylate) Synthesized Via Reversible Addition-Fragmentation Chain-Transfer Emulsion Polymerization And The Polymer'S Application In Toughening Polycarbonate

Investigation on Foamed PP/Nano-CaCO3 Composites in a Combined in-Mold Decoration and Microcellular Injection Molding Process

Conventional and Microcellular Injection Molding of a Highly Filled Polycarbonate Composite with Glass Fibers and Carbon Black

Effect of Mold Opening on Microcellular Polyether-Ether-ketone Fabricated by Injection Molding

Effect of polybutadiene grafted methyl methacrylate copolymer on the mechanical performance of PC/ABS composites

Lightweight and High Impact Toughness PP/PET/POE Composite Foams Fabricated by In Situ Nanofibrillation and Microcellular Injection Molding

Research on high quality PC/ABS alloy

Cellular distribution and warpage deformation in double-sided in-mold decoration combined with microcellular injection molding process

Structure and Properties of Heat‐resistant ABS Resins Innovated by NSM Random Copolymer

Experimental study on mechanical behaviors of injection molded PC/PMMA blends

High-strength, impact-resistant PP/PTFE composite foam with enhanced surface appearance achieved through mold-opening microcellular injection molding

Microcellular injection molding of polyether-ether-ketone

Crystallinity and mechanical properties of polypropylene products foamed by microcellular injection molding process

Dual material fused filament fabrication of composite core‐shell structures with improved impact resistance and interfacial adhesion

Toughening of Pbt/Pc Blends with Epoxy Functionalized Core-Shell Modifiers

Mechanical Properties of Injection Molded PP/PET-Nanofibril Composites and Foams