Abstract:Li–CO2 batteries have recently attracted attention as promising candidates for next-generation energy storage devices due to their extremely high theoretical energy density. The real application of Li–CO2 cells involves addressing several drawbacks, including high charging potential, poor coulombic efficiency, and low rechargeability. Molybdenum disulfide supported on carbon nanotubes (MoS2/CNT) with various ratios functioned as a cathode catalyst for Li–CO2 batteries. The optimal MoS2/CNT composite achieved a maximum discharge capacity of 8551 mAh g–1 with a coulombic efficiency of 96.7%. This hybrid also obtained an initial charging plateau of 3.87 V at a current density of 100 mA g–1 with a cutoff capacity of 500 mAh g–1. It provided ideal electrochemical stability of 142 cycles at the current densities of 100 mA g–1, which was comparable with that of some precious metal catalysts. This optimized MoS2/CNT was also cycled at 200 and 400 mA g–1 for 112 and 55 times, respectively. Density functional theory calculations demonstrated that the sulfided Mo-edge (s-Mo-edge) on MoS2 materials showed appropriate adsorption strengths of Li, CO2, and Li2CO3. Moreover, joint results of Raman profiles and extended X-ray absorption fine structure spectra elucidated that the catalytic efficiencies of MoS2/CNT hybrids were proportional to the quantities of exposed s-Mo-edge active sites.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c17942?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c17942</a>.Computational method; XPS spectra of bare MoS2 and MoS2/CNT catalysts (Figure S1); full discharge–charge profiles of bare CNT and bare MoS2 cathodes (Figure S2); SEM with elemental mapping spectra of bare MoS2 and MoS2/CNT catalysts (Figure S3); electrochemical impedance spectroscopy of bare MoS2 and MoS2/CNT cathodes (Figure S4); cycling performances of bare CNT, MoS2/CNT, and MoS2-CNT cathodes (Figure S5–S7, S9); photograph and XRD diagrams of electrodes after the cycling measurement (Figure S8); high-resolution Mo 3d XPS spectrum of MoS2/CNT cathode (Figure S10); calculated adsorption energies of Li, CO2, and Li2CO3 on different sites of MoS2 (Figure S11–S13); charge density difference of CO2 on different sites of MoS2 (Figure S14); comparisons of electrochemical performances with previous studies (Table S1); and fitting parameters for Mo EXAFS spectra (Table S2) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c17942/suppl_file/am0c17942_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Comparative Study of Li–CO 2 and Na–CO 2 Batteries with Ru@CNT as a Cathode Catalyst

Effective Ru/CNT Cathode for Rechargeable Solid-State Li–CO 2 Batteries

Li-CO2 and Na-CO2 Batteries: Toward Greener and Sustainable Electrical Energy Storage

Carbon Nanotube@RuO2 As a High Performance Catalyst for Li-CO2 Batteries

Ultrafine RuO2 nanoparticles/MWCNTs cathodes for rechargeable Na-CO2 batteries with accelerated kinetics of Na2CO3 decomposition

Ru Nanosheet Catalyst Supported by Three-Dimensional Nickel Foam As a Binder-Free Cathode for Li–CO2 Batteries

Boosting Energy Efficiency and Stability of Li–CO 2 Batteries via Synergy between Ru Atom Clusters and Single‐Atom Ru–N 4 sites in the Electrocatalyst Cathode

Facile Synthesis of Birnessite δ-MnO 2 and Carbon Nanotube Composites as Effective Catalysts for Li-CO 2 Batteries

Catalytically Active Site Identification of Molybdenum Disulfide as Gas Cathode in a Nonaqueous Li–CO 2 Battery

Hierarchical Ti 3 C 2 T x MXene/Carbon Nanotubes for Low Overpotential and Long-Life Li-CO 2 Batteries

Probing the electrochemical evolutions of Na–CO2 nanobatteries on Pt@NCNT cathodes using in-situ environmental TEM

Cationic metal-organic framework derived ruthenium-copper nano-alloys in porous carbon to catalytically boost the cycle life of Li-CO2 batteries

Carbon nanotubes with CoNi alloy nanoparticles growing on porous carbon substrate as cathode for Li-CO 2 batteries

Ultrafine Co-Doped NiO Nanoparticles Decorated on Carbon Nanotubes Improving the Electrochemical Performance and Cycling Stability of Li–CO 2 Batteries

Enhanced Electrochemical Performance of Aprotic Li‐CO 2 Batteries with a Ruthenium‐Complex‐Based Mobile Catalyst

A reversible lithium–CO2 battery with Ru nanoparticles as a cathode catalyst

Cobalt-decorated carbon nanofibers as a low overpotential cathode for nonaqueous Na-CO2 batteries

Decreasing the Overpotential of Aprotic Li‐CO2 Batteries with the In‐Plane Alloy Structure in Ultrathin 2D Ru‐Based Nanosheets

Ultrafine Ru nanoparticles anchored on N-doped mesoporous hollow carbon spheres as a highly efficient bifunctional catalyst for Li–CO 2 batteries

Enhancing Catalyzed Decomposition of Na2CO3 with Co2MnO X Nanowire-Decorated Carbon Fibers for Advanced Na-CO2 Batteries.

Low-Overpotential Rechargeable Na-CO2 Batteries Enabled by an Oxygen-Vacancy-Rich Cobalt Oxide Catalyst