Abstract:Due to the capability of CO2 uptake and the high theoretical energy density, Li-CO2 batteries have attracted a great deal of attention as a novel and promising energy storage system which is based on the reversible reaction between lithium and CO2. However, the insulating Li2CO3 formed upon the discharge process, which is difficult to be decomposed during recharge process due to the lack of effective cathode catalyst, leads to the poor cycling performance and huge overpotential of the Li-CO2 batteries. In this work, the Ru nanosheets were directly grown on one side of the three-dimensional nickel foam through a galvanic replacement reaction to form the Ru/Ni electrode, which was further used in the Li-CO2 batteries. The highly dispersed Ru nanosheets in the Ru/Ni cathode effectively promote the decomposition of discharge product Li2CO3 and thus reduce the charge overpotential. Moreover, the typical porous and binder-free Ru/Ni electrode not only has a sturdy construction to suppress the side reaction in the Li-CO2 batteries, but also enables the rapid permeation of CO2 and electrolyte/electron into the active sites of the Ru/Ni electrode. As a result, the Ru/Ni cathode-based Li-CO2 battery exhibits the superior discharge capacity (9502 mAh g(-1)), good coulombic efficiency (95.4%) and excellent rate performance (3177mAh g(-1) at 500mA g(-1)) at the full discharge/charge condition. When operated at the limited capacity of 1000mAh g(-1), this cell can run for over 100 cycles with the charge potential below 4.1 V. The findings provide a snapshot towards improving the reversibility of Li-CO2 batteries by designing the binder-free stable cathodes. (C) 2019 Elsevier Ltd. All rights reserved.

A reversible lithium–CO2 battery with Ru nanoparticles as a cathode catalyst

A Highly Reversible Long-Life Li-CO2 Battery with a RuP2-Based Catalytic Cathode

A Highly Reversible Long-Life Li-CO 2 Battery with a RuP 2 -Based Catalytic Cathode.

A reversible lithium–CO<sub>2</sub> battery with Ru nanoparticles as a cathode catalyst

Ultrafine Ru nanoparticles anchored on N-doped mesoporous hollow carbon spheres as a highly efficient bifunctional catalyst for Li–CO 2 batteries

Ru Nanosheet Catalyst Supported by Three-Dimensional Nickel Foam As a Binder-Free Cathode for Li–CO2 Batteries

Enhanced Electrochemical Performance of Aprotic Li‐CO 2 Batteries with a Ruthenium‐Complex‐Based Mobile Catalyst

Graphdiyne scaffold anchored highly dispersed ruthenium nanoparticles as an efficient cathode catalyst for rechargeable Li–CO2 battery

Cationic metal-organic framework derived ruthenium-copper nano-alloys in porous carbon to catalytically boost the cycle life of Li-CO2 batteries

Boosting Energy Efficiency and Stability of Li–CO 2 Batteries via Synergy between Ru Atom Clusters and Single‐Atom Ru–N 4 sites in the Electrocatalyst Cathode

High-Performance Li-CO2 Battery Based on Carbon-Free Porous Ru@QNFs Cathode.

Effective Ru/CNT Cathode for Rechargeable Solid-State Li–CO 2 Batteries

RuO2 nanoparticles supported on Ni and N co-doped carbon nanotubes as an efficient bifunctional electrocatalyst of lithium-oxygen battery

Ru/ITO: a Carbon-Free Cathode for Nonaqueous Li-O2 Battery.

Carbon Electrode with NiO and RuO2 Nanoparticles Improves the Cycling Life of Non-Aqueous Lithium-Oxygen Batteries

Carbon Nanotube@RuO2 As a High Performance Catalyst for Li-CO2 Batteries

Creating CoRu Dual Active Sites Codecorated Stable Porous Ceria Support for Enhanced Li-CO2 Batteries Cathodes

Nanoporous Ru as a carbon- and binder-free cathode for Li-O2 batteries.

A long‐cycle‐life reversible Li‐CO2 battery enabled by engineering the active sites of graphene with Pd nanoparticles

Ru-decorated knitted Co3O4 nanowires as a robust carbon/binder-free catalytic cathode for lithium–oxygen batteries

Ultrafine Ru/RuOx Nanoparticles Uniformly Anchored on Carbon Nanotubes As Cathode Electrocatalyst for Lithium‐Oxygen Batteries