A reversible lithium–CO2 battery with Ru nanoparticles as a cathode catalyst

Sixie Yang,Yu Qiao,Ping He,Yijie Liu,Zhu Cheng,Jun-jie Zhu,Haoshen Zhou

DOI: https://doi.org/10.1039/c6ee03770d

2017-01-01

Abstract:The application of Ru nanoparticles as a cathode catalyst significantly promotes the reversibility of Li–CO2 batteries.

What problem does this paper attempt to address?

A reversible lithium–CO2 battery with Ru nanoparticles as a cathode catalyst

Sixie Yang,Yu Qiao,Ping He,Yijie Liu,Zhu Cheng,Jun-jie Zhu,Haoshen Zhou

DOI: https://doi.org/10.1039/c6ee03770d

IF: 32.5

2017-01-01

Energy & Environmental Science

Abstract:Li-CO2 batteries have attracted wide attention owing to their high energy density and ability to utilize carbon dioxide. However, current Li-CO2 batteries still suffer from several unresolved problems such as low coulombic efficiency and high charge potential, and hence much work is still required to optimize the electrochemical performance of Li-CO2 batteries. In this work, Ru nanoparticles have been deposited on Super P carbon using a solvothermal method and the resulting material (Ru@Super P) has been employed as a cathode in Li-CO2 batteries. The Li-CO2 battery with Ru@ Super P as the cathode exhibits significantly reduced charge potential and can be operated for 80 cycles with a fixed capacity of 1000 mA h g(-1) at 100 mA g(-1), which is by far the best cycling stability among the reported Li-CO2 batteries. We found that Ru possesses a selective catalytic activity in promoting the reaction between Li2CO3 and carbon during charge. This characteristic of Ru helps to avoid electrolyte decomposition and improve the electrochemical performance of Li-CO2 batteries.
A Highly Reversible Long-Life Li-CO 2 Battery with a RuP 2 -Based Catalytic Cathode.

Ziyang Guo,Jinli Li,Haocheng Qi,Xuemei Sun,Hongdong Li,Andebet Gedamu Tamirat,Jie Liu,Yonggang Wang,Lei Wang

DOI: https://doi.org/10.1002/smll.201803246

IF: 13.3

2019-01-01

Small

Abstract:Rechargeable Li-CO2 batteries have attracted worldwide attention due to the capability of CO2 capture and superhigh energy density. However, they still suffer from poor cycling performance and huge overpotential. Thus, it is essential to explore highly efficient catalysts to improve the electrochemical performance of Li-CO2 batteries. Here, phytic acid (PA)-cross-linked ruthenium complexes and melamine are used as precursors to design and synthesize RuP2 nanoparticles highly dispersed on N, P dual-doped carbon films (RuP2 -NPCFs), and the obtained RuP2 -NPCF is further applied as the catalytic cathode for Li-CO2 batteries. RuP2 nanoparticles that are uniformly deposited on the surface of NPCF show enhanced catalytic activity to decompose Li2 CO3 at low charge overpotential. In addition, the NPCF its with porous structure in RuP2 -NPCF provides superior electrical conductivity, high electrochemical stability, and enough ion/electron and space for the reversible reaction in Li-CO2 batteries. Hence, the RuP2 -NPCF cathode delivers a superior reversible discharge capacity of 11951 mAh g-1 , and achieves excellent cyclability for more than 200 cycles with low overpotentials (<1.3 V) at the fixed capacity of 1000 mAh g-1 . This work paves a new way to design more effective catalysts for Li-CO2 batteries.
A Highly Reversible Long-Life Li-CO2 Battery with a RuP2-Based Catalytic Cathode

Ziyang Guo,Jinli Li,Haocheng Qi,Xuemei Sun,Hongdong Li,Andebet Gedamu Tamirat,Jie Liu,Yonggang Wang,Lei Wang

DOI: https://doi.org/10.1002/smll.201803246

IF: 13.3

2018-01-01

Small

Abstract:Rechargeable Li-CO2 batteries have attracted worldwide attention due to the capability of CO2 capture and superhigh energy density. However, they still suffer from poor cycling performance and huge overpotential. Thus, it is essential to explore highly efficient catalysts to improve the electrochemical performance of Li-CO2 batteries. Here, phytic acid (PA)-cross-linked ruthenium complexes and melamine are used as precursors to design and synthesize RuP2 nanoparticles highly dispersed on N, P dual-doped carbon films (RuP2-NPCFs), and the obtained RuP2-NPCF is further applied as the catalytic cathode for Li-CO2 batteries. RuP2 nanoparticles that are uniformly deposited on the surface of NPCF show enhanced catalytic activity to decompose Li2CO3 at low charge overpotential. In addition, the NPCF its with porous structure in RuP2-NPCF provides superior electrical conductivity, high electrochemical stability, and enough ion/electron and space for the reversible reaction in Li-CO2 batteries. Hence, the RuP2-NPCF cathode delivers a superior reversible discharge capacity of 11951 mAh g(-1), and achieves excellent cyclability for more than 200 cycles with low overpotentials (<1.3 V) at the fixed capacity of 1000 mAh g(-1). This work paves a new way to design more effective catalysts for Li-CO2 batteries.
Ultrafine Ru nanoparticles anchored on N-doped mesoporous hollow carbon spheres as a highly efficient bifunctional catalyst for Li–CO 2 batteries

Jin Zhao,Xinsheng Xu,Jian Chen,Yang Liu,Jiawei Wu,Feijian Lou,Yangyang Fan,Yun Qiao

DOI: https://doi.org/10.2139/ssrn.4672711

IF: 9.2

2024-04-27

Journal of Power Sources

Abstract:Rechargeable Li–CO 2 battery is a facilitative and promising device for the conversion of CO 2 to electrochemical energy. However, it remains a challenge to enhance the sluggish decomposition kinetics of lithium carbonate as the discharge product. Herein, the Ru nanoparticles anchored on N-doped mesoporous hollow carbon nanospheres (Ru-AHCNs) are designed as cathode to enhance the electrochemical performance of Li–CO 2 battery. The Ru-AHCNs cathode displays a high discharge specific capacity of 11194.4 mA h g −1 at the current density of 100 mA g −1 . In addition, the Ru-AHCNs cathode can stably run over 50 cycles and maintain a small overpotential (<1.38 V) with a limited capacity of 1000 mA h g −1 at 100 mA g −1 . The excellent stability and catalytic activity of the cathode are ascribed to the following factors: (i) Uniform deposition of Ru nanoparticles in hollow carbon nanospheres can enhance the decomposition of Li 2 CO 3 and provide considerable exposure to active sites. (ii) N-doped mesoporous hollow carbon nanospheres can provide abundant electron transport channels and promote the nucleation of discharge products. These results evidently prove the reversible formation and decomposition of the discharge products, indicating that Ru-AHCNs cathode possesses excellent bifunctional catalytic activity.

energy & fuels,materials science, multidisciplinary,electrochemistry,chemistry, physical
Graphdiyne scaffold anchored highly dispersed ruthenium nanoparticles as an efficient cathode catalyst for rechargeable Li–CO2 battery

Yiru Ma,Huiqi Qu,Wenna Wang,Ziyang Guo,Yueqin Yu,Feng Liu,Bin Yu,Minge Tian,Zhenjiang Li,Bin Li,Lei Wang

DOI: https://doi.org/10.1016/j.cclet.2023.108352

IF: 9.1

2023-03-01

Chinese Chemical Letters

Abstract:Lithium (Li)–CO2 battery is rising as an attractive energy-storage system with the competence of CO2 conversion/fixation. However, its practical development is seriously hindered by the high overpotential. Herein, a rational design on a highly catalytic Li–CO2 battery electrode built by graphdiyne powder as a multi-functional laminar scaffold with anchored highly dispersed Ru nanoparticles is explored. The strong interaction between the abundant acetylenic bond sites of graphdiyne scaffold and Ru nanoparticles can effectively promote the electrochemical progress and reduce the voltage polarization. The unique channels architecture of the cathodic catalyst with enough space not only accelerates CO2 diffusion and electrons/Li+ transport, but also allows a large amount of accommodation for discharged product (Li2CO3) to assure an advanced capacity. The corresponding Li–CO2 battery displays an advanced discharged capacity of 15030 mAh/g at 500 mA/g, great capacity retention of 8873 mAh/g at 2 A/g, high coulombic efficiency of 97.6% at 500 mA/g and superior life span for 120 cycles with voltage gap of 1.67 V under a restricted capacity of 1000 mAh/g at 500 mA/g. Ex/in-situ studies prove that synergy between Ru nanoparticles and acetylene bonds of GDY can boost the round-trip CO2RR and CO2ER kinetics.

chemistry, multidisciplinary
Ru Nanosheet Catalyst Supported by Three-Dimensional Nickel Foam As a Binder-Free Cathode for Li–CO2 Batteries

Huimin Zhao,Dongdong Li,Hongdong Li,Andebet Gedamu Tamirat,Xiuyan Song,Zhaoxiang Zhang,Yonggang Wang,Ziyang Guo,Lei Wang,Shouhua Feng

DOI: https://doi.org/10.1016/j.electacta.2019.01.027

IF: 6.6

2019-01-01

Electrochimica Acta

Abstract:Due to the capability of CO2 uptake and the high theoretical energy density, Li-CO2 batteries have attracted a great deal of attention as a novel and promising energy storage system which is based on the reversible reaction between lithium and CO2. However, the insulating Li2CO3 formed upon the discharge process, which is difficult to be decomposed during recharge process due to the lack of effective cathode catalyst, leads to the poor cycling performance and huge overpotential of the Li-CO2 batteries. In this work, the Ru nanosheets were directly grown on one side of the three-dimensional nickel foam through a galvanic replacement reaction to form the Ru/Ni electrode, which was further used in the Li-CO2 batteries. The highly dispersed Ru nanosheets in the Ru/Ni cathode effectively promote the decomposition of discharge product Li2CO3 and thus reduce the charge overpotential. Moreover, the typical porous and binder-free Ru/Ni electrode not only has a sturdy construction to suppress the side reaction in the Li-CO2 batteries, but also enables the rapid permeation of CO2 and electrolyte/electron into the active sites of the Ru/Ni electrode. As a result, the Ru/Ni cathode-based Li-CO2 battery exhibits the superior discharge capacity (9502 mAh g(-1)), good coulombic efficiency (95.4%) and excellent rate performance (3177mAh g(-1) at 500mA g(-1)) at the full discharge/charge condition. When operated at the limited capacity of 1000mAh g(-1), this cell can run for over 100 cycles with the charge potential below 4.1 V. The findings provide a snapshot towards improving the reversibility of Li-CO2 batteries by designing the binder-free stable cathodes. (C) 2019 Elsevier Ltd. All rights reserved.
Enhanced Electrochemical Performance of Aprotic Li‐CO 2 Batteries with a Ruthenium‐Complex‐Based Mobile Catalyst

Zhen Zhang,Wen-Long Bai,Zhi-Peng Cai,Jin-Huan Cheng,Hua-Yi Kuang,Bo-Xu Dong,Yu-Bo Wang,Kai-Xue Wang,Jie-Sheng Chen

DOI: https://doi.org/10.1002/anie.202105892

2021-01-01

Angewandte Chemie International Edition

Abstract:AbstractLi‐CO2 batteries are regarded as next‐generation high‐energy‐density electrochemical devices. However, the greatest challenge arises from the formation of the discharge product, Li2CO3, which would accumulate and deactivate heterogenous catalysts to cause huge polarization. Herein, Ru(bpy)3Cl2 was employed as a solution‐phase catalyst for Li‐CO2 batteries and proved to be the most effective one screened so far. Spectroscopy and electrochemical analyses elucidate that the RuII center could interact with both CO2 and amorphous Li2C2O4 intermediate, thus promoting electroreduction process and delaying carbonate transformation. As a result, the charge potential is reduced to 3.86 V and over 60 discharge/charge cycles are achieved with a fixed capacity of 1000 mAh g−1 at a current density of 300 mA g−1. Our work provides a new avenue to improve the electrochemical performance of Li‐CO2 batteries with efficient mobile catalysts.
Highly reversible Li 2 RuO 3 cathodes in sulfide-based all solid-state lithium batteries

Yuqi Wu,Ke Zhou,Fucheng Ren,Yang Ha,Ziteng Liang,Xuefan Zheng,Zhenyu Wang,Wu Yang,Maojie Zhang,Mingzeng Luo,Corsin Battaglia,Wanli Yang,Lingyun Zhu,Zhengliang Gong,Yong Yang

DOI: https://doi.org/10.1039/d2ee01067d

IF: 32.5

2022-01-01

Energy & Environmental Science

Abstract:Highly reversible oxygen redox chemistry of Li 2 RuO 3 enabled by a stabilizing electrode–electrolyte interphase with sulfide solid electrolyte.

energy & fuels,chemistry, multidisciplinary,engineering, chemical,environmental sciences
Modulating the Coordination Chemistry of Co‐N‐C Catalytic Sites by Ru Species to Accelerate the Polysulfide Conversion Kinetics in Lithium‐Sulfur Batteries

Haoxian Zhu,Zhiqian Lin,Liyuan Qian,Xiaohui Tang,Jiangnan Wen,Yun Wang,Xiaofei Wang,Songbai Han,Jinlong Zhu,Haibin Lin,Yusheng Zhao

DOI: https://doi.org/10.1002/chem.202400945

2024-05-02

Chemistry - A European Journal

Abstract:The performance of lithium‐sulfur batteries is compromised by the loss of sulfur as dissolved polysulfides in the electrolyte and consequently the polysulfide redox shutting effect. Accelerating the conversion kinetics of polysulfide intermediates into sulfur or lithium sulfide through electrocatalysis has emerged as a root‐cause solution. Co‐N‐C composite electrocatalyst is commonly used for this purpose. It is illustrated here that how the effectiveness can be improved by modulating the coordination chemistry of Co‐N‐C catalytic sites through introducing Ru species (RuCo‐NC). The well‐dispersed Ru in the Co‐NC carbon matrix altered the total charge distribution over the Co‐N‐C catalytic sites and led to the formation of electron‐rich Co‐N, which is highly active for the polysulfide conversion reactions. Using Ru to modulate the electronic structure in the Co‐N‐C configuration and the additional catalytic sites over the Ru‐Nx species can manifest optimal adsorption behavior of polysulfides. Consequently, the sulfur cathode with RuCo‐NC can reduce the capacity fade rate from 0.11% per cycle without catalyst (initial capacity of 701 mAh g‐1) to 0.054% per cycle (initial capacity of 1074 mAh g‐1) over 400 cycles at 0.2 C rate. The results of this study provide the evidence for a feasible catalyst modification strategy for the polysulfide electrocatalysis.

chemistry, multidisciplinary
Boosting Energy Efficiency and Stability of Li–CO 2 Batteries via Synergy between Ru Atom Clusters and Single‐Atom Ru–N 4 sites in the Electrocatalyst Cathode

Jiangfeng Lin,Jingnan Ding,Haozhi Wang,Xinyi Yang,Xuerong Zheng,Zechuan Huang,Wanqing Song,Jia Ding,Xiaopeng Han,Wenbin Hu

DOI: https://doi.org/10.1002/adma.202200559

IF: 29.4

2022-03-25

Advanced Materials

Abstract:The Li-CO2 battery is a novel strategy for CO2 capture and energy-storage applications. However, the sluggish CO2 reduction and evolution reactions cause large overpotential and poor cycling performance. Herein, a new catalyst containing well-defined ruthenium (Ru) atomic clusters (RuAC ) and single-atom Ru-N4 (RuSA ) composite sites on carbon nanobox substrate (RuAC+SA @NCB) (NCB = nitrogen-doped carbon nanobox) is fabricated by utilizing the different complexation effects between the Ru cation and the amine group (NH2 ) on carbon quantum dots or nitrogen moieties on NCB. Systematic experimental and theoretical investigations demonstrate the vital role of electronic synergy between RuAC and Ru-N4 in improving the electrocatalytic activity toward the CO2 evolution reaction (CO2 ER) and CO2 reduction reaction (CO2 RR). The electronic properties of the Ru-N4 sites are essentially modulated by the adjacent RuAC species, which optimizes the interactions with key reaction intermediates thereby reducing the energy barriers in the rate-determining steps of the CO2 RR and CO2 ER. Remarkably, the RuAC+SA @NCB-based cell displays unprecedented overpotentials as low as 1.65 and 1.86 V at ultrahigh rates of 1 and 2 A g-1 , and twofold cycling lifespan than the baselines. The findings provide a novel strategy to construct catalysts with composite active sites comprising multiple atom assemblies for high-performance metal-CO2 batteries.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Effective Ru/CNT Cathode for Rechargeable Solid-State Li–CO 2 Batteries

Kirankumar Venkatesan Savunthari,Chien-Hung Chen,You-Ruei Chen,Zizheng Tong,Kevin Iputera,Fu-Ming Wang,Chun-Chuan Hsu,Da-Hua Wei,Shu-Fen Hu,Ru-Shi Liu

DOI: https://doi.org/10.1021/acsami.1c11000

2021-09-08

Abstract:An effective Ru/CNT electrocatalyst plays a crucial role in solid-state lithium–carbon dioxide batteries. In the present article, ruthenium metal decorated on a multi-walled carbon nanotubes (CNTs) is introduced as a cathode for the lithium–carbon dioxide batteries with Li1.5Al0.5Ge1.5(PO4)3 solid-state electrolyte. The Ru/CNT cathode exhibits a large surface area, maximum discharge capacity, excellent reversibility, and long cycle life with low overpotential. The electrocatalyst achieves improved electrocatalytic performance for the carbon dioxide reduction reaction and carbon dioxide evolution reaction, which are related to the available active sites. Using the Ru/CNT cathode, the solid-state lithium–carbon dioxide battery exhibits a maximum discharge capacity of 4541 mA h g–1 and 45 cycles of battery life with a small voltage gap of 1.24 V compared to the CNT cathode (maximum discharge capacity of 1828 mA h g–1, 25 cycles, and 1.64 V as voltage gap) at a current supply of 100 mA g–1 with a cutoff capacity of 500 mA h g–1. Solid-state lithium–carbon dioxide batteries have shown promising potential applications for future energy storage.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c11000.Raman spectra, SEM-EDAX, elemental mapping, TEM-EDAX, optical images, powder XRD pattern, XANES spectrum of the Ru/CNT cathode (pristine, first discharge, and first charge), in situ GC–MS results, fitting results for Ru K-edge EXAFS spectra, Rietveld refinement values, and literature comparison results (PDF)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology
Ru/ITO: a Carbon-Free Cathode for Nonaqueous Li-O2 Battery.

Fujun Li,Dai-Ming Tang,Yong Chen,Dmitri Golberg,Hirokazu Kitaura,Tao Zhang,Atsuo Yamada,Haoshen Zhou

DOI: https://doi.org/10.1021/nl402213h

IF: 10.8

2013-01-01

Nano Letters

Abstract:Ru nanoparticles deposited on a conductive support indium tin oxide (Ru/ITO) were applied as a carbon-free cathode in a nonaqueous Li-O2 battery. The Li-O2 battery with Ru/ITO showed much lower charging overpotentials and better cycling performance at 0.15 mA/cm(2) than those with Super P (SP) and SP loaded with Ru nanoparticles (Ru/SP) as the cathodes. The carbon-free cathode Ru/ITO can effectively reduce formation of Li2CO3 or other Li carbonates in a discharging process, which cannot be completely decomposed upon charging, in comparison with the carbon based cathode. The improved performance of Ru/ITO can be attributed to the superior catalytic activity of Ru nanoparticles toward oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) and the absence of carbon that has been reported to react with Li2O2 to form Li2CO3.
Energy Band Engineering Guided Design of Bidirectional Catalyst for Reversible Li–CO 2 Batteries

Bingyi Lu,Xinru Wu,Xiao Xiao,Biao Chen,Weihao Zeng,Yingqi Liu,Zhoujie Lao,Xian‐Xiang Zeng,Guangmin Zhou,Jinlong Yang

DOI: https://doi.org/10.1002/adma.202308889

IF: 29.4

2023-11-22

Advanced Materials

Abstract:Abstract Li–CO 2 batteries arouse great interest in the context of carbon neutralization, but their practicability is severely hindered by the sluggish CO 2 redox reaction kinetics at the cathode, which brings about formidable challenges such as high overpotential and low Coulombic efficiency. For the complex multi‐electron transfer process, the design of catalysts at the molecular or atomic level and the understanding of the relationship between electron state and performance are essential for the CO 2 redox. However, little attention is paid to it. In this work, using Co 3 S 4 as a model system, density functional theory (DFT) calculations reveal that the adjusted d ‐band and p ‐band centers of Co 3 S 4 with the introduction of Cu and sulfur vacancies are hybridized between CO 2 and Li species, respectively, which is conducive to the adsorption of reactants and the decomposition of Li 2 CO 3 , and the experimental results further verify the effectiveness of energy band engineering. As a result, a highly efficient bidirectional catalyst is produced and shows an ultra‐small voltage gap of 0.73 V and marvelous Coulombic efficiency of 92.6%, surpassing those of previous catalysts under similar conditions. This work presents an effective catalyst design and affords new insight into the high‐performance cathode catalyst materials for Li–CO 2 batteries.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
RuO2 nanoparticles supported on Ni and N co-doped carbon nanotubes as an efficient bifunctional electrocatalyst of lithium-oxygen battery

Chengcheng Xiang,Wenjia Sheng,Pengfang Zhang,Shaojian Zhang,Juntao Li,Yao Zhou,Ling Huang,Shigang Sun

DOI: https://doi.org/10.1007/s40843-020-1632-9

2021-04-15

Science China Materials

Abstract:Li2O2, as the discharge product of Li-O2 batteries on cathode, is difficult to be electrochemically decomposed, which will lead to short cycling lifespan of the batteries. In this study, the cycling lifespan of Li-O2 battery was prolonged significantly by an efficient bifunctional catalyst. The Ni and N co-doped carbon nanotubes (NiNCs) were synthesized firstly, and then RuO2 nanoparticles were deposited on NiNCs by a hydrothermal route to synthesize RuO2/NiNC catalysts. Transmission electron microscopy and X-ray diffraction characterizations demonstrated that part of metallic Ni was converted into NiO and Ni(OH)2 after loading RuO2, and the existence of NiO layer can prevent further oxidation of metallic Ni. The Li-O2 battery with RuO2/NiNC as the cathode catalyst exhibits an overpotential of 0.43 V, which is much lower than the value of 1.03 V measured with the Li-O2 battery using NiNC as the cathode catalyst. At a rate of 200 mA g−1, the Li-O2 battery with the RuO2/NiNC cathode can maintain a reversible capacity of 500 mA h g−1 for 260 cycles, and 117 cycles with a higher reversible capacity of 1000 mA h g−1. The superior property of the RuO2/NiNC bifunctional catalyst could be ascribed to the high activity of RuO2 and the rich carbon nanotube structure of NiNC for deposition and decomposition of Li2O2.

materials science, multidisciplinary
Energy Band Engineering Guided Design of Bidirectional Catalyst for Reversible Li-CO2 Batteries.

Bingyi Lu,Xinru Wu,Xiao,Biao Chen,Weihao Zeng,Yingqi Liu,Zhoujie Lao,Xian-Xiang Zeng,Guangmin Zhou,Jinlong Yang

DOI: https://doi.org/10.1002/adma.202308889

IF: 29.4

2024-01-01

Advanced Materials

Abstract:Li-CO2 batteries arouse great interest in the context of carbon neutralization, but their practicability is severely hindered by the sluggish CO2 redox reaction kinetics at the cathode, which brings about formidable challenges such as high overpotential and low Coulombic efficiency. For the complex multi-electron transfer process, the design of catalysts at the molecular or atomic level and the understanding of the relationship between electron state and performance are essential for the CO2 redox. However, little attention is paid to it. In this work, using Co3S4 as a model system, density functional theory (DFT) calculations reveal that the adjusted d-band and p-band centers of Co3S4 with the introduction of Cu and sulfur vacancies are hybridized between CO2 and Li species, respectively, which is conducive to the adsorption of reactants and the decomposition of Li2CO3, and the experimental results further verify the effectiveness of energy band engineering. As a result, a highly efficient bidirectional catalyst is produced and shows an ultra-small voltage gap of 0.73 V and marvelous Coulombic efficiency of 92.6%, surpassing those of previous catalysts under similar conditions. This work presents an effective catalyst design and affords new insight into the high-performance cathode catalyst materials for Li-CO2 batteries.
Cationic metal-organic framework derived ruthenium-copper nano-alloys in porous carbon to catalytically boost the cycle life of Li-CO2 batteries

Zhibin Cheng,Ziyuan Wu,Yiyang Tang,Xi Fan,Jindan Zhang,Yilong Chen,Shengchang Xiang,Zhangjing Zhang

DOI: https://doi.org/10.1039/d2nr04066b

IF: 6.7

2022-10-21

Nanoscale

Abstract:Rechargeable Li-CO2 batteries are an innovative energy storage technology with broad application prospects owing to their superb energy density and ability to capture the greenhouse gas CO2. However, they are still suffering from severe challenges in the formation and decomposition of electrochemically sluggish Li2CO3 discharge products, resulting in poor battery performance. Development of an efficient cathodic electrocatalyst has the potential to address these issues by catalytically boosting the conversion of Li2CO3. Herein, we have designed a Ru-Cu nanoalloy decorated porous carbon (Ru-Cu@NPC) material derived from an anion-exchanged cationic MOF, and it can serve as an efficient cathode electrocatalyst for Li-CO2 batteries. Benefitting from the uniform distribution of ultrafine Ru-Cu nanoalloys with high catalytic performance, Ru-Cu@NPC displays excellent CO2 reduction and evolution activities. Impressively, the Li-CO2 battery with the Ru-Cu@NPC catalyst exhibits a remarkably low potential gap of 0.93 V at 100 mA g-1 and a stable discharge/charge cycling performance of more than 400 cycles at a high current density of 400 mA g-1 within a limiting capacity of 1000 mA h g-1. The study provides an opportunity for the research of cationic MOF derived bimetallic catalysts in the Li-CO2 battery field.
Intermetallic-driven highly reversible electrocatalysis in Li–CO2 battery over nanoporous Ni3Al/Ni heterostructure

Tianzhen Jian,Wenqing Ma,Caixia Xu,Hong Liu,John Wang

DOI: https://doi.org/10.1016/j.esci.2023.100114

2023-02-01

eScience

Abstract:Li–CO2 batteries, which integrate CO2 utilization and electrochemical energy storage, offer the prospect of utilizing a greenhouse gas and providing an alternative to the well-established lithium-ion battery. However, they still suffer from rather limited reversibility, low energy efficiency, and sluggish CO2 redox reaction kinetics. To address these key issues, a nanoporous Ni3Al intermetallic/Ni heterojunction (NP-Ni3Al/Ni) is purposely engineered here via an alloying–etching protocol, whereby the unique interactions between Al and Ni in Ni3Al endow NP-Ni3Al/Ni with optimum reactant/product adsorption and thus unique catalytic performance for the CO2 redox reaction. Furthermore, the nanoporous spongy structure benefits mass transport as well as discharge product storage and enables a rich multiphase reaction interface. In situ Raman studies and theoretical simulations reveal that both CO2 reduction and the co-decomposition of Li2CO3 and C are distinctly promoted by NP-Ni3Al/Ni, thereby greatly improving catalytic activity and stability. NP-Ni3Al/Ni offers promising application potential in Li–CO2 batteries, with its scalable fabrication, low production cost, and superior catalytic performance.
A rechargeable all-solid-state Li–CO 2 battery using a Li 1.5 Al 0.5 Ge 1.5 (PO 4 ) 3 ceramic electrolyte and nanoscale RuO 2 catalyst

Yuemin Du,Yijie Liu,Sixie Yang,Chao Li,Zhu Cheng,Feilong Qiu,Ping He,Haoshen Zhou

DOI: https://doi.org/10.1039/d0ta12421d

IF: 11.9

2021-01-01

Journal of Materials Chemistry A

Abstract:A rechargeable all-solid-state Li–CO 2 battery using a RuO 2 catalyst and LAGP solid-state electrolyte was demonstrated.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Transient, in Situ Synthesis of Ultrafine Ruthenium Nanoparticles for a High-Rate Li–CO2 Battery

Yun Qiao,Shaomao Xu,Yang Liu,Jiaqi Dai,Hua Xie,Yonggang Yao,Xiaowei Mu,Chaoji Chen,Dylan J. Kline,Emily M. Hitz,Boyang Liu,Jianwei Song,Ping He,Michael R. Zachariah,Liangbing Hu

DOI: https://doi.org/10.1039/c8ee03506g

IF: 32.5

2019-01-01

Energy & Environmental Science

Abstract:Ultrafine Ru nanoparticles anchored on freestanding activated carbon nanofibers with porous structure are synthesized as a high performing cathode for Li–CO2 batteries via a transient, in situ thermal shock method.
Ru-decorated knitted Co3O4 nanowires as a robust carbon/binder-free catalytic cathode for lithium–oxygen batteries

Liliang Huang,Yangjun Mao,Guoqing Wang,Xueke Xia,Jian Xie,Shichao Zhang,Gaohui Du,Gaoshao Cao,Xinbing Zhao

DOI: https://doi.org/10.1039/c6nj01364c

IF: 3.3

2016-01-01

New Journal of Chemistry

Abstract:The working principle of Li-air (Li-O-2) batteries is based on the formation/decomposition of Li2O2 on the catalytic electrode, which is basically different from the shuttle mechanism of Li-ion batteries. The successful operation of Li-O-2 batteries requires an optimized cathode that is electrochemically/chemically stable, mechanically robust, and catalytically active. In this work, we proposed a unique design of a binder/carbon-free catalytic cathode consisting of knitted Co3O4 nanowires and decorated Ru nanoparticles. It was found that the Co3O4/Ru-catalyzed Li-O-2 batteries exhibit considerably higher capacity and much improved cycling performance than the Co3O4-catalyzed ones. When the capacity is limited at 500 mA h g(-1), the Co3O4/Ru-catalyzed battery can sustain a stable cycling of 29 times. The stable cycling can last 122 times at a limited capacity of 300 mA h g(-1). This result indicates that the catalytic performance and structural stability of the cathodes are equally important to achieve a high performance of Li-O-2 batteries.

A reversible lithium–CO<sub>2</sub> battery with Ru nanoparticles as a cathode catalyst

A reversible lithium–CO2 battery with Ru nanoparticles as a cathode catalyst

A Highly Reversible Long-Life Li-CO 2 Battery with a RuP 2 -Based Catalytic Cathode.

A Highly Reversible Long-Life Li-CO2 Battery with a RuP2-Based Catalytic Cathode

Ultrafine Ru nanoparticles anchored on N-doped mesoporous hollow carbon spheres as a highly efficient bifunctional catalyst for Li–CO 2 batteries

Graphdiyne scaffold anchored highly dispersed ruthenium nanoparticles as an efficient cathode catalyst for rechargeable Li–CO2 battery

Ru Nanosheet Catalyst Supported by Three-Dimensional Nickel Foam As a Binder-Free Cathode for Li–CO2 Batteries

Enhanced Electrochemical Performance of Aprotic Li‐CO 2 Batteries with a Ruthenium‐Complex‐Based Mobile Catalyst

Highly reversible Li 2 RuO 3 cathodes in sulfide-based all solid-state lithium batteries

Modulating the Coordination Chemistry of Co‐N‐C Catalytic Sites by Ru Species to Accelerate the Polysulfide Conversion Kinetics in Lithium‐Sulfur Batteries

Boosting Energy Efficiency and Stability of Li–CO 2 Batteries via Synergy between Ru Atom Clusters and Single‐Atom Ru–N 4 sites in the Electrocatalyst Cathode

Effective Ru/CNT Cathode for Rechargeable Solid-State Li–CO 2 Batteries

Ru/ITO: a Carbon-Free Cathode for Nonaqueous Li-O2 Battery.

Energy Band Engineering Guided Design of Bidirectional Catalyst for Reversible Li–CO 2 Batteries

RuO2 nanoparticles supported on Ni and N co-doped carbon nanotubes as an efficient bifunctional electrocatalyst of lithium-oxygen battery

Energy Band Engineering Guided Design of Bidirectional Catalyst for Reversible Li-CO2 Batteries.

Cationic metal-organic framework derived ruthenium-copper nano-alloys in porous carbon to catalytically boost the cycle life of Li-CO2 batteries

Intermetallic-driven highly reversible electrocatalysis in Li–CO2 battery over nanoporous Ni3Al/Ni heterostructure

A rechargeable all-solid-state Li–CO 2 battery using a Li 1.5 Al 0.5 Ge 1.5 (PO 4 ) 3 ceramic electrolyte and nanoscale RuO 2 catalyst

Transient, in Situ Synthesis of Ultrafine Ruthenium Nanoparticles for a High-Rate Li–CO2 Battery

Ru-decorated knitted Co3O4 nanowires as a robust carbon/binder-free catalytic cathode for lithium–oxygen batteries