Abstract:Dimethyl ether (DME) is a highly reactive diesel substitute that can be used as a pilot fuel to ignite low- reactivity methane (CH4) in heavy-duty engines. To optimize the efficiency and emissions of CH4/DME dual-fuel engines, it is crucial to study the fundamental combustion characteristics of DME mixed with methane. This study focuses on the influence of CH4 addition on the low-temperature oxidation (LTO) preparation stage and the thermal ignition (TI) preparation stage of DME in the two-stage ignition process, as these two stages respectively control the ignition delay of the first and second stages. The comparison is made between pure DME and a 50% CH4 and 50% DME blended fuel, operating under thermodynamic conditions representing the engine in- cylinder environment at 30 atm pressure, 650K temperature, and a stoichiometric equivalence ratio. The results show that the addition of methane hardly affects the control mechanism of the two-stage ignition of DME. Specifically, the LTO preparation stage is still promoted by the increase in OH radicals in the DME’s low-temperature oxygenation pathways to form KET, and the second stage is still controlled by the H2O2 loop mechanism. The kinetic analysis also reveals that methane addition can compete for some of the OH radicals in the LTO preparation stage, which has a suppressing effect on ignition. However, in the TI preparation stage, methane can promote the loop reaction of OH→HO2→H2O2→OH and promote ignition. For the operating conditions studied here, although methane consumes a total of 7.24% prior to thermal ignition, it only consumes 0.63% of the total amount in the LTO preparation stage and 1.81% of the total amount in the TI preparation stage. This indicates that methane is mainly consumed in the LTO stage, accounting for 65% of the total methane consumption amount. It can be concluded that the kinetic effect of methane has a relatively small impact on the ignition delay of the DME, at least for the conditions investigated here. In other words, the dilution and thermal effects caused by adding methane are the main reasons for the prolonged time of LTO/TI preparation. Overall, more fundamental research is warranted to understand the role of methane in the two-stage ignition process of DME, which could facilitate the development of CH4/DME dual-fuel engines.

Dielectric barrier discharge plasma reforming of methane in rocket engine: Characteristics and technical feasibility

Methane Incorporation into Liquid Fuel by Non-Equilibrium Plasma Discharges

Effect of dielectric barrier discharge methane reforming products on the combustion performance of rocket engine

Plasma-Assisted Ignition and Combustion of Methane-Air Mixtures Using Dielectric Barrier Discharge

CH4 reforming with CO2 using a nanosecond pulsed dielectric barrier discharge plasma

Carbon Dioxide Reforming of Methane to Syngas by Thermal Plasma

Chemical Insights into Plasma-Assisted Dry Reforming of Methane in a Nanosecond Discharge

Application of Non-Thermal Plasma Technology on Fugitive Methane Destruction: Configuration and Optimization of Double Dielectric Barrier Discharge Reactor

Enhancing Ignition and Inhibiting Extinction of Methane Diffusion Flame by in Situ Fuel Processing Using Dielectric-Barrier-discharge Plasma

Study on the Enhancement Effect of Dielectric Barrier Discharge on the Premixed Methane/Oxygen/Helium Flame Velocity

The Effect of Methane Addition on the Low-Temperature Oxidation Preparation and the Thermal Ignition Preparation of Dimethyl Ether under Representative Engine In-Cylinder Thermal Conditions

Dry reforming of methane by microsecond pulsed dielectric barrier discharge plasma: Optimizing the reactor structures

Methane Dry Reforming over Ni/Al2O3 Catalyst in Spark Plasma Reactor: Linking Computational Fluid Dynamics (CFD) with Reaction Kinetic Modelling

Experimental study on dry reforming of methane by a plasma catalytic hybrid system

Experimental study of microwave resonance plasma ignition of methane–air mixture in a constant volume cylinder

Efficiency Enhancement and Lean Combustion Performance Improvement by Argon Power Cycle in a Methane Direct Injection Engine

Dry Reforming of Methane with Carbon Dioxide Using Pulsed Dc Arc Plasma at Atmospheric Pressure

Investigation of Dry Reforming of Methane in a Dielectric Barrier Discharge Reactor

Reaction mechanism explorations on non-thermal plasma reforming of CO2-CH4 by combining kinetics modeling and emission spectroscopy measurements

Study on premixed combustion enhancement with dielectric barrier discharge

Research on laser induced plasma ignition of gas oxygen/methane