Abstract:Combining the diffusive laser excitation and the photoacoustic signals detection, photoacoustic computed tomography (PACT) is uniquely suited for deep tissue imaging. A diffraction-limited ultrasound point detector is highly desirable for maximizing the spatial resolution and the field-of-view of the reconstructed volumetric images. Among all the available ultrasound detectors, micro-ring resonator (MRR) based ultrasound detectors offer the lowest area-normalized limit of detection (nLOD) in a miniature form-factor, making it an ideal candidate as an ultrasound point detector. However, despite their wide adoption for photoacoustic imaging, the underlying signal transduction process has not been systematically studied yet. Here we report a comprehensive theoretical model capturing the transduction of incident acoustic signals into digital data, and the associated noise propagation process, using experimentally calibrated key process parameters. The theoretical model quantifies the signal-to-noise ratio (SNR) and the nLOD under the influence of the key process variables, including the quality factor (Q-factor) of the MRR and the driving wavelength. While asserting the need for higher Q-factors, the theoretical model further quantifies the optimal driving wavelength for optimizing the nLOD. Given the MRR with a Q-factor of 1 x 105, the theoretical model predicts an optimal SNR of 30.1 dB and a corresponding nLOD of 3.75 x 10-2 mPa mm2/Hz1/2, which are in good agreement with the experimental measurements of 31.0 dB and 3.39 x 10-2 mPa mm2/Hz1/2, respectively. The reported theoretical model can be used in guiding the optimization of MRR-based ultrasonic detectors and PA experimental conditions, in attaining higher imaging resolution and contrast. The optimized operating condition has been further validated by performing PACT imaging of a human hair phantom.

Imprinted Polymer Microrings As High-Performance Ultrasound Detectors in Photoacoustic Imaging

Review of Imprinted Polymer Microrings As Ultrasound Detectors: Design, Fabrication, and Characterization

Polymer Microring Resonators for High Sensitivity, Broadband, Wide-Directivity Ultrasound Detection and High-Resolution Imaging

Ultrabroad Bandwidth and Highly Sensitive Optical Ultrasonic Detector for Photoacoustic Imaging

Polymer Microring Resonators for High-Sensitivity and Wideband Photoacoustic Imaging

Wideband Photoacoustic Tomography Using Polymer Microring Resonators

Low-noise Small-Size Microring Ultrasonic Detectors for High-Resolution Photoacoustic Imaging.

Highly sensitive ultrasound detection using nanofabricated polymer micro-ring resonators

Low-Noise Wideband Ultrasound Detection Using Polymer Microring Resonators

Ultra-broad bandwidth ultrasound detector using imprinted polymer microring resonator

High-Sensitivity and Wide-Directivity Ultrasound Detection Using High Q Polymer Microring Resonators

Photoacoustic Microscopy: Current Situation and New Ultrasonic Detectors

Optical micro-ring resonator based ultrasonic detector for multimodal photoacoustic microscopy

Photoacoustic Properties of Metal-Insulator-metal Nanostructures

A transparent broadband ultrasonic detector based on an optical micro-ring resonator for photoacoustic microscopy

Theoretical and Experimental Study on the Detection Limit of the Micro-Ring Resonator Based Ultrasound Point Detectors

Theoretical And Experimental Studies Of Distance Dependent Response Of Micro-Ring Resonator-Based Ultrasonic Detectors For Photoacoustic Microscopy

Photoacoustic Endoscopy Using Polymer Microring Resonators

Transparent microfiber Fabry-Perot ultrasound sensor with needle-shaped focus for multiscale photoacoustic imaging

Photoacoustic Probe Using A Microring Resonator Ultrasonic Sensor for Endoscopic Applications

Ultrasound Measurement Using On-Chip Optical Micro-Resonators and Digital Optical Frequency Comb