Abstract:We have developed a photoacoustic (PA) sensor using a low-power, continuous- wave laser and a kHz-range microphone. The sensor is simple, flexible, cost-effective, and compatible with commercial optical microscopes. The sensor enables noncontact PA measurements through air, whereas most current existing PA techniques require an acoustic coupling liquid for detection. The PA sensor has three main components: one is the chamber that holds the sample, the second is a resonator column used to amplify the weak PA signals generated within the sample chamber, and the third is a microphone at the end of the resonator column to detect the amplified signals. The chamber size was designed to be 8 mm × 3 mm as the thermal diffusion length and viscous-thermal damping of air at room pressure and temperature are 2 and 1 mm, respectively. We numerically and experimentally examined the effect of the resonator column size on the frequency response of the PA sensor. The quality factor decreased significantly when the sample chamber size was reduced from 4 mm × 3 mm to 2 mm × 3 mm due to thermos-viscous damping of the air. The quality factor decreased by 27%, demonstrating the need for optimal design for the sample chamber and resonator column size. The system exhibited noise equivalent molecular sensitivity (NEM) per unit bandwidth (NEM / √ Δf) of ∼19,966 Hz - 1/2 or 33 × 10 - 21 mol or 33 zeptomol, which is an improvement of 2.2 times compared to the previous system design. This PA sensor has the potential for noncontact high-resolution PA imaging of materials without the need for coupling fluids. .

Theoretical And Experimental Studies Of Distance Dependent Response Of Micro-Ring Resonator-Based Ultrasonic Detectors For Photoacoustic Microscopy

A transparent broadband ultrasonic detector based on an optical micro-ring resonator for photoacoustic microscopy

Photoacoustic Microscopy: Current Situation and New Ultrasonic Detectors

Reflection-Mode Optical-Resolution Photoacoustic Microscopy With High Detection Sensitivity By Using A Perforated Acoustic Mirror

Photoacoustic Properties of Metal-Insulator-metal Nanostructures

Highly sensitive ultrasound detection using nanofabricated polymer micro-ring resonators

Photoacoustic Spectrum Analysis For Microstructure Characterization Using Ultra-Broad Bandwidth Optical Ultrasonic Detector

Isometric multimodal photoacoustic microscopy based on optically transparent micro-ring ultrasonic detection

Sensitivity of photoacoustic microscopy

Photoacoustic Probe Using A Microring Resonator Ultrasonic Sensor for Endoscopic Applications

Photoacoustic Spectral Response using Ultrasound and Interferometric Sensors: A Correlation Study for a High Bandwidth Real-Time Blood Vasculature Monitoring Application in a Chick-Embryo Chorioallantoic Membrane (CAM) Model

Detection of weak optical absorption by optical-resolution photoacoustic microscopy

An Encapsulated Optical Microsphere Sensor for Ultrasound Detection and Photoacoustic Imaging

Experimental design and numerical investigation of a photoacoustic sensor for a low-power, continuous-wave, laser-based frequency-domain photoacoustic microscopy.

Characterizing Cellular Morphology by Photoacoustic Spectrum Analysis with an Ultra-Broadband Optical Ultrasonic Detector

In Vivo Reflection-Mode Photoacoustic Microscopy Enhanced by Plasmonic Sensing with an Acoustic Cavity

Optical Detection of Ultrasound in Photoacoustic Imaging

Photoacoustics meets ultrasound: micro-Doppler photoacoustic effect and detection by ultrasound

Research of high sensitive resonant infraredphoto-acoustic gas sensor

Probing the Spatial Impulse Response of Ultrahigh-Frequency Ultrasonic Transducers with Photoacoustic Waves

Design and Simulation of 1D Longitudinal Acoustic Resonator for Photoacoustic Spectroscopy