Abstract:A popular application of propellant containing of aluminum powder is as fuel for solid rocket motors (SRMs). The combustion gas contains large amounts of alumina particles, which will worsen the SRM thermal protection system by inducing severe mechanical erosion on the surface of the insulation material exposed directly to the high-temperature and high-velocity gas and solid two-phase flow. To protect the structures of SRMs from being damaged, a thermal protection system is required, and it must be optimally designed to be as thin as possible, but thick enough to survive the SRM operating time. To optimize the thickness of insulation material, the particle erosion model should be set up. But most existing particle erosion models are the empirical expressions obtained by experiment or direct reference to pipeline particle erosion models, which limit the application of the model. The ablation process and the flow are coupled with one another. So, to optimize thickness, numerical calculation of dynamic ablation of the insulation material in SRMs should be carried out. In this work, the ethylene propylene diene monomer (EPDM) ablative composite used as heat shield was analyzed. The physical, chemical, and mechanical processes of ablation were expounded. Models for insulation thermal decomposition and thermochemical ablation were constructed, in which pyrolysis and carbonization temperature, pyrolysis rate, latent heat and pyrolysis products, and the main reaction chemical equation of the thermal chemical ablation were researched and confirmed. The coupling of physics, chemistry, and mechanics is through the charring layer in the process of ablation of the insulation material. The charring layer was treated as a porous medium. The ablation models and its numerical method were applied to calculate the ablation of insulation material in an experimental SRM. The computed result is in good agreement with that of the experiment, which shows that the model and numerical method have good accuracy. (C) 2014 American Society of Civil Engineers.

Experimental and numerical analysis of mode II fracture between propellant and insulation

Research on the Safety of Long Term Storage Solid Rocket Motor with Debonded Layer

Correlation Between Solid Propellant Failure and Interface Debonding in Solid Rocket Motors

Dynamic Simulation of Insulation Material Ablation Process in Solid Propellant Rocket Motor

Finite Element Modeling of Propellant and Inhibitor Interface Debonding

Structural Integrity Analyses on the Anti-high Overload of a Solid Rocket Motor

Experimental and Numerical Analysis on Mode II Fracture Toughness of CFRP Adhesive Joints Using a Nonlinear Cohesive/friction Coupled Model

Determination of Fracture Parameters for Propellant/liner Interface Affect Zone Through Measuring J-integral

Finite Element Analysis of Adhesive Failure of Solid Composite Propellant Multi-material Structure for Underwater Intelligent Equipment

Experimental Investigation Of Crack/Debond Propagation Process In Burning Test Motor

A Semi-Analytical Method for Determining the Mode-I Delamination R-curve and Fiber Bridging Traction-Separation Law of Double-double Laminates

Simulated Experiment on Case Overheating Failure of Solid Rocket Motor under Flight Overload Condition

Influence of Different Propellant Systems on Ablation of EPDM Insulators in Overload State

Analysis on interfacial debond crack of SRM

Crack propagation velocity and fracture toughness of hydroxyl-terminated polybutadiene propellants with consideration of a thermo-viscoelastic constitutive model: Experimental and numerical study

Strain rate and temperature‐dependent shear fracture mechanism of high‐energy propellant/liner interface zone

Numerical Simulation on the Interface Debonding in Solid Propellant under Large Deformation by a Cohesive Zone Model

Structural Integrity Assessment of a Solid Propellant Grain Considering Confining Pressure Effect

A Constitutive Model of the Solid Propellants Considering the Interface Strength and Dewetting

Stability Analysis of the Interfacial Debonded Crack Between Propellant and Liner of Solid Rocket Motor Grains

Experimental research on CMDB propellant fracture under impact load