Abstract:The lamellae deformation and cavitation behavior of annealed isotactic polypropylene during uniaxial stretching are comprehensively investigated by in situ synchrotron small-angle X-ray scattering and wide-angle X-ray scattering. We reveal how lamellae deformation occurs in the time scales of elastic deformation, intralamellar slip, and melting-recrystallization, separated by three critical strains which are only rarely influenced by annealing. Strain I (0.1) marks the end of elastic deformation and the onset of intralamellar slip, beyond which the crystallinity decreases gradually. Strain II (0.45) signifies the start of the recrystallization process, from where the long period in the stretching direction begins to decrease from its maximum and the polymer chains in the crystal start to orient along the stretching direction. The energy required for melting arises from the friction between the fragmented lamellae produced by intralamellar slip. Strain III (0.95) denotes the end of the recrystallization process. Beyond the strain of 0.95, the long period and the crystal size remain nearly unchanged. During further stretching, the newly formed lamellae serve as the anchoring points for polymer chains in the amorphous phase. The extension of the polymer chains in between lamellae triggers the strain hardening behavior. On the other hand, annealing significantly decreases the critical strain for voids formation and increases the voids number but restricts the void size. For those samples annealed at a temperature lower than 90 degrees C, voids are formed between strain II and strain III, and voids are oriented in the stretching direction once they are formed. However, for those samples annealed at a temperature higher than 105 degrees C, voids are formed between strain I and strain II. In this case, voids are initially oriented with their longitudinal axis perpendicular to the stretching direction and then transferred along stretching direction via void coalescence. Additionally, the formation of voids influences neither the critical strains for lamellae deformation nor the final long period, the orientation of polymer chains, or the crystal size. The final long period, the orientation of polymer chains in the crystal, and the crystal size are determined only by the stretching temperature through melting-recrystallization.

Effect of 110 keV electrons on the deformation mechanisms of low density polyethylene

Effect of Oscillatory Shear on the Mechanical Properties and Crystalline Morphology of Linear Low Density Polyethylene

The Effects of Irradiation Cross-Linking on the Thermal Degradation and Flame-Retardant Properties of the Hdpe/Eva/Magnesium Hydroxide Composites

Stretch-induced structural transition of linear low-density polyethylene during uniaxial stretching under different strain rates

Radiation Effects on Polyethylene and Polypropylene by Electrons and Protons

Deformation Mechanism of Hard Elastic Polyethylene Film During Uniaxial Stretching: Effect of Stretching Speed

Structural Evolution of LLDPE-LMW/HMW Blend During Uniaxial Deformation As Revealed by in Situ Synchrotron Radiation X-ray Scattering

Structural Study of 12 MeV Electron Irradiated Polypropylene by X-ray Diffraction

Effect of deformation ratio of flow-induced crystallization on polyethylene in crystalline behavior, thermal stability, and tensile loading: a molecular dynamics simulation

Structural Evolution of Hard-Elastic Polyethylene Cast Film in Temperature-Strain Space: an In-Situ SAXS and WAXS Study

Effects of electron irradiation on structure and bonding of polymer spherulite thin films

Effects of Irradiation on the Melting and Crystallization Behavior of Ethylene Polymers with Different Thermal History

Reversed thermal stability between stress-induced melting and recrystallized crystallites and original inclined ones in moderately stretched ultra high molecular weight polyethylene and high density polyethylene

Strain Rate and Temperature Influence on Micromechanisms of Plastic Deformation of Polyethylenes Investigated by Positron Annihilation Lifetime Spectroscopy

Critical Strains for Lamellae Deformation and Cavitation During Uniaxial Stretching of Annealed Isotactic Polypropylene

Molecular dynamics simulation of plastic deformation in polyethylene under uniaxial and biaxial tension

SAXS Investigation of Latent Track Structure in HDPE Irradiated with High Energy Fe Ions

Pressure measurement devices: from technical assessment to clinical performance

Studies On High Density Polyethylene (Hdpe) Functionalized By Ultraviolet Irradiation And Its Application

Enhanced dielectric and energy storage properties of polypropylene by high-energy electron beam irradiation

Interplay between crystallization behaviors and extensional deformation of isotactic polypropylene and its blend with poly(ethylene-co-octene)