Abstract:LaMgAl11O19 (LMA) with magnetoplumbite structure has been identified as a potential candidate for the next generation of thermal barrier coatings (TBCs). However, the as-sprayed LMA coating presents a large amount of amorphous phase originating from the rapid quenching from the molten droplets, which may compromise the reliability of coating during high-temperature service. A logical approach to improve LMA TBC life, therefore, is to enhance its crystallinity. In the present study, three LMA powders with different particle size distributions (fine, medium and coarse feedstocks) were utilized to deposit TBCs to investigate whether the thermal durability of LMA can be improved by increasing particle size. It was based on a hypothesis that large particle size can decrease the melting degree of in-flight particles and thus result in high crystallinity of as-sprayed LMA coating, making less recrystallization stress to enhance the thermal shock resistance of LMA coating. Results show that prolonged thermal cycling durability can indeed be achieved by increasing particle size. However, excessive particle size could lead to higher porosity derived from unmelted particles, which function as the weak regions for the coating system, thereby damaging the structural integrity and adhesive strength between the topcoat and bond coat. This could cause microcrack linking when the accumulated thermal stress exceeds its fracture toughness under consecutive heating-cooling cycles despite its higher crystallinity. Concerning the coating fabricated by medium powder, it achieves the optimal balance of crystallinity and structure integrity, resulting in the longest thermal cycling lifetime. The results provide guidance for the development and design of high thermal durability LMA TBCs. When optimizing the recrystallization stress within the coating, attention should be paid to improving its bonding strength simultaneously.

High-Temperature Aging Of Plasma Sprayed Quasi-Eutectoid Laybzr2o7-Part I: Phase Evolution

High‐Temperature Aging of Plasma Sprayed Quasi‐Eutectoid LaYbZr2O7–Part II: Microstructure & Thermal Conductivity

The Microstructure and Property Evolution of LaYbZr2O7 Thermal Barrier Coatings

High Temperature Mechanical Properties of Zirconia Metastable T '-Phase Degraded Yttria Stabilized Zirconia

Phase Transformation Behavior in Air Plasma Sprayed Yttria Stabilized Zirconia Coating

Thermal shock resistance and failure analysis of La2(Zr0.75Ce0.25)2O7-based TBCs produced by atmospheric plasma spraying

Sintering resistance and phase stability of (Y0.2La0.2Nd0.2Sm0.2Eu0.2)2Zr2O7 for ultra-high temperature thermal barrier coatings

Mechanical Properties of LaTi2Al9O19 and Thermal Cycling Behaviors of Plasma-Sprayed LaTi2Al9O19/YSZ Thermal Barrier Coatings

Mechanical Properties Durability of Sc2O3-Y2O3 Co-Stabilized ZrO2 Thermal Barrier Materials for High Temperature Application

Evolution mechanism of the microstructure and mechanical properties of plasma-sprayed yttria-stabilized hafnia thermal barrier coating at 1400 °C

High-entropy thermal barrier coating of rare-earth zirconate: A case study on (La0.2Nd0.2Sm0.2Eu0.2Gd0.2)2Zr2O7 prepared by atmospheric plasma spraying

Thermal Cycling Behavior and Failure Mechanism of LaTi2Al9O19/YSZ Thermal Barrier Coatings Exposed to Gas Flame

Enhanced Sintering Resistance in LaYbZr2O7 System Through HfO2 Doping for Thermal Insulation Ceramic Materials

Thermal Stability of Plasma-Sprayed Thick Thermal Barrier Coatings Using Triplex ProTM-200 Torch

Thermophysical properties and cyclic lifetime of plasma sprayed SrAl 12 O 19 for thermal barrier coating applications

Hot Corrosion Mechanism and Thermal Cycling Performance of Air-Plasma-sprayed LaYbZr2O7 Thermal Barrier Coatings in the Vanadate-Containing Molten Salts

Properties evaluation and failure behaviour of plasma sprayed Y4Hf3O12 for thermal barrier coating applications

Interfacial Stability between High-Entropy (La0.2Yb0.2Sm0.2Eu0.2Gd0.2)2Zr2O7 and Yttria-Stabilized Zirconia for Advanced Thermal Barrier Coating Applications

Microstructure and Thermal Property Evolution of Plasma-Sprayed Lu2SiO5 EBCs Under High Temperature Environments

Prolonged thermal durability of plasma-sprayed lanthanum hexaluminate thermal barrier coating by optimizing crystallinity

Thermal conductivity and mechanical properties of YSZ/LaPO 4 composites