Abstract:Corrosion transition during uniform corrosion of zirconium alloys receives much attention since it is the major degradation procedure. However, predicting the time and oxide thickness at transition has been hindered by the lack of knowledge about transition kinetics and how it responds to varied temperatures. Current study investigated the temperature-sensitivity of corrosion kinetics, transition behavior and microstructures of various zirconium alloys corroded in superheated steam ranging from 390 °C/10.3 MPa to 455 °C/10.3 MPa by autoclave experiment and microscopy analyses. Transition time was found to follow Arrhenius-type relationship with temperature for the first time. Both the transition oxide thickness and metastable oxide thickness increased with temperature, which was theoretically deduced and experimentally confirmed. In Zr-4 oxides, a transition thickness varying from 3.3 μm at 390 °C to 4.2 μm at 455 °C was observed. Microstructure results presented rather large HCP-ZrO particles (200∼400 nm) at O/M interface and they were even larger at the protruded positions. An intense sub-stoichiometric atmosphere was identified at O/M interface, promoting the growth of metastable oxides. The activation energy of transition kinetics was 86∼114 kJ/mol, which is close to diffusion activation energy of oxygen in tetragonal zirconia. A new model based on parabolic-law empirical relationship was thus proposed to predict transition kinetics. Predictions regarding the time to oxidation breakaway at 900-1000 °C were reported, and the results were in good agreement with the experimental data.

A Thermo‐Chemo‐Mechanical Model for the Oxidation of Zirconium Diboride

Characterization of the Surface Oxygen-Diffusion Zone of the Thermally Oxidized Titanium

Mechanical–chemical coupling phase-field modeling for inhomogeneous oxidation of zirconium induced by stress–oxidation interaction

Oxidation Mechanism of ZrB2/SiC Ceramics Based on Phase-Field Model

Long-Term Oxidation of Zirconium Alloy in Simulated Nuclear Reactor Primary Coolant—Experiments and Modeling

Thermal Oxidation Process of Micron Zirconium Powder

Temperature sensitivity and transition kinetics of uniform corrosion of zirconium alloys in superheated steam

Temperature-dependent oxidation kinetics and mechanical properties degradation of Cf/ZrB2-SiC composites

Exploring the stability, thermodynamic and mechanical properties of zirconium oxides and suboxides under temperature and pressure: A first-principles predictions

Chemo-mechanical Coupling Effect on Bidirectional Diffusion Process During Oxidation

High-temperature steam oxidation experiment of molten zirconium alloy

Atomic-Scale Modeling of the Dynamics of Titanium Oxidation

Study on eutectic-oxidation coupling reaction of Cr-Zr system in high temperature steam environment

Steam oxidation of Cr-coated zirconium alloy claddings at 1200 °C: Kinetics transition and failure mechanism of Cr coatings

A thermodynamic approach of the mechano-chemical coupling during the oxidation of uranium dioxide

Structural self-deterioration mechanism for zirconium diboride in an inert environment

Oxidation kinetics of Cr-coated zirconium alloy: Effect of coating thickness and microstructure

Unveiling the feature of deposition of oxygen and water molecules on the zirconium surface: A molecular dynamic study

A Curvature-Dependent Chemo-Mechanical Coupling Model for Two-Dimensional Oxidation on the Curved Surface

High-temperature oxidation and nitridation of substoichiometric zirconium carbide in isothermal air

Modeling of Growth Stress Gradient Effect on the Oxidation Rate at High Temperature