Abstract:Weights of honeycomb sandwich composite structures are strictly controlled in scenarios such as in contexts of aerospace engineering. However, such structures extensively studied in past investigations were partly or completely made of aluminum or other metallic materials. Sufficient research has not been reported for honeycomb sandwich composites made of lightweight non-metallic materials. This paper presents an investigation into the mechanical responses of the Nomex honeycomb sandwich structure in a three-point bending test. The mathematical relationship between the shear stress distribution in the skin and that in the Nomex honeycomb core under the bending load was deduced. By applying the commercial software ABAQUS/Explicit, numerical simulations were performed with a highly detailed finite element model (micromechanical level) and equivalent elastic parameters. By comparing the experimental and numerical results, the validity of the theoretical derivation was verified. The effects of the thickness of the skin and the direction of the core on the mechanical responses of the honeycomb sandwich structure were studied. The results showed two different failure patterns of the honeycomb sandwich structure in the three-point bending test, which has rarely been reported previously. The improving effect of the increase in the skin thickness on the ultimate bearing capacity was more remarkable when the honeycomb core had a higher shear rigidity. For the same core direction, the honeycomb sandwich structure with the thicker skin had a better crashworthiness. The skin shear force distribution coefficient decreased exponentially with the ratio of core height-to-skin thickness.

Mechanical Properties of the Honeycomb Nanoporous Membranes

Determination of Elastic Modulus and Poisson Ratio for Nanoporous Materials

The mechanical properties of a transverse isotropic voided material

Mechanical properties of super honeycomb structures based on carbon nanotubes.

Mechanical Properties of Nanoporous Graphene Membrane

Elastoplastic Indentation Responses of Nanoporous Film/Substrate System

Novel Technique for Measuring the Mechanical Properties of Porous Materials by Nanoindentation

Mechanical Properties of Auxetic Honeycombs Realized via Material Extrusion Additive Manufacturing: Experimental Testing and Numerical Studies

Computational Study of the Nanoscale Mechanical Properties of C-S-H Composites under Different Temperatures

Mechanical responses of a composite sandwich structure with Nomex honeycomb core

Numerical Analysis and Mechanical Properties of Nomex™ Honeycomb Core

Nanohardness by Nanoindentation

Energy absorption performance of honeycombs with curved cell walls under quasi-static compression

Mechanical Properties and Energy Absorption of 3D Printed Square Hierarchical Honeycombs under In-Plane Axial Compression

Mechanical Property Characterization of 3D-Printed Carbon Fiber Honeycomb Core Composite Sandwich Structures

An approach on identification of equivalent properties of honeycomb core using experimental modal data

Mechanical Properties of 3D Carbon/carbon Composites by Nanoindentation Technique

Review on the Research Progress of Three-Dimensional Honeycomb Carbon:P Roperties and Applications

The 3D-Printed Honeycomb Metamaterials Tubes with Tunable Negative Poisson's Ratio for High-Performance Static and Dynamic Mechanical Properties

Mechanical Properties of Super Honeycomb Structures

Fabrication and Compression Properties of Ti Honeycomb