Abstract:Composite mechanical joints are extensively used and becoming crucial components for primary and secondary structures in industry. Considerable efforts have been contributed to the failure behavior of resin matrix laminate composite bolt joint, but few ones refer to carbon matrix woven composites. In current work, a comprehensive experimental and numerical research on the failure behavior for satin woven carbon/carbon composites under pin-loading, which is the typical loading case for mechanical joint, was presented. Seven types of specimens with different configuration were tested to evaluate the influence of the geometry on the failure modes. The testing results stated that, with the increasing of width-to-hole diameter ratio (W/D) and edge distance-to-hole diameter ratio (E/D), the net tension and shear out failure transformed into the bearing failure respectively, while hole diameter-to-thickness ratio (D/t) hardly affect the failure mode. For a further exploration for damage mechanism of the acceptable bearing failure in engineering, damage accumulation and evolution were assessed combining numerical simulation and acoustic emission monitoring. In view of the complexity of satin woven framework, the hierarchical multiscale numerical strategy from micro-to macro-level was proposed to obtain the material mechanical performance. In order to acquire reliable prediction and consider the effects of the uncertainty sources on composite properties, the model geometry reconstruction was performed using X-ray tomography. Meanwhile, the fiber and void random distributions were determined via the Random Sequential Adsorption algorithm. The Murakami-Ohno damage theory was adopted to characterize the damage propagation. It is concluded that, the numerical prediction agreed with the testing results reasonably well, and the main damage mechanism during the bearing failure included matrix cracking, yarns pulling-out and yarns fracture matching various amplitude ranges of acoustic emission signals.

Experimental Investigation of In-Plane Mechanical Performance of Carbon/Glass Hybrid Woven Composite

Experimental Study Of In-Plane Mechanical Performance Of Carbon/Glass Hybrid Woven Composite At Different Strain Rates

Experimental Study of In-plane Mechanical Properties of Carbon Fibre Woven Composite at Different Strain Rates

Comparative studies on the effect of fabric structure on mechanical properties of carbon fiber/epoxy composites

Experimental investigation on the effects of fabric architectures on mechanical and damage behaviors of carbon/epoxy woven composites

Experimental Investigations on the In-Plane Dynamic Compressive Behavior and Upper Limit of Constant Strain Rate for 2D Twill Weave Carbon Fiber Reinforced Composite

Numerical and Experimental Investigation on Mechanical Responses of Plain Woven CFRP Composite under Various Loading Cases

Experiment Study of Mechanical Properties of 3D Orthogonal Woven Composite

Analysis of Mechanical Properties and Exploration of Failure Mechanism for Nonwoven Reinforced Composites

Experimental Investigation on the Mechanical Behaviour of 3D Carbon/carbon Composites under Biaxial Compression

Mechanical Properties of Woven Glass Fiber-Reinforced Polymer Composites

In Situ Experimental Investigation on the Out-Plane Damage Evolution of 3D Woven Carbon-Fiber Reinforced Composites

Quasi-static mechanical behavior of 2.5D woven variable thickness composites

Preparation of multiaxial glass fiber/epoxy prepreg and its mechanical properties in composites

Experimental and Multiscale Numerical Investigation on Failure Behavior of Satin Woven Carbon/carbon Composites Subjected to Pin-Loading

Experimental study on tension and compression mechanical property of 3D fine woven punctured C/C composites

A Study On The Development Of 3d Woven Fabric Using Carbon-Glass Fibers

Mechanical Behavior and Failure Mode of Woven Carbon/epoxy Laminate Composites under Dynamic Compressive Loading

Investigation on the off-axis tensile failure behaviors of 3D woven composites through a coupled numerical-experimental approach

Effect of Different Z-directional Fibers on Mechanical Properties of Composites Using Numerical and Experimental Tests

Mechanical Behaviors of the Three-Dimensional Woven Carbon/carbon Composite Materials under Biaxial Compression