Abstract:Despite recent advances and improvements in modeling and prediction of the dynamics of the machining process, an efficient machining process is limited due to chatter and instability of machining system. In fact, the machining system contains various kinds of joints, which cause difficulties in dynamics modeling, simulation and prediction. Moreover, the flexible support system results in large deformation and violent vibration of the workpiece when machining, and the thin-walled workpiece easily gives rise to the chatter of the machining system. Therefore, the dynamics of the flexible support system was considered to calculate stability lobe diagram in the modeling of milling process. The whole machining system was regarded as a closed loop composed by the machine tool structures, support, workpiece and machining process. In this paper, the receptance coupling (RC) method was introduced to predict the dynamics of the closed machining system. A milling process was taken for example to predict the chatter limitations using the dynamics of closed model. The mathematical model of the machining system (machine tool structures, spindle, holder and tool), together with the details of joint contacts, was given based on the RC method. The RC model was used to obtain the dynamics of the system, while receptance of the tool point was coupled. Based on the coupling model of the machining system, the depth limitations under different speeds were estimated for the technology parameter optimization in milling process. The response was considered to be the sum of the cutting point and the support system. The flexibility of the support system was considered to be the feedback of the cutting stiffness. By this means, the traditional model was modified to calculate the stability lobe diagram based on the dynamics of the spindle and support system. Furthermore, the milling experiment was carried out to verify the prediction results, and the dominant natural frequencies of receptance at tool point were obtained by modal testing to define the stability lobe diagram. It was found that the chatter results matched well with the stability lobes. It was concluded that the support system with poor stiffness might cause violent chatter especially when the workpiece was thin-walled. The cutting depth limitations of the flexible support system were lower than that of the rigid one. Moreover, this closed model of the machining system is appropriate for the chatter prediction of the flexible support system or thin-walled workpiece, so it is helpful for a better parameter optimization.

Research on Efficiency and Stability of Computer Numerical Control Lathe

Experimental and simulation study on chatter stability region of integral impeller with non-uniform allowance.

Inherent Characteristics and Dynamic Response Analysis of High-Speed Cutting-Tool System

Research on Milling Stability Using CNC Small Size Tool

Analysis and experimental investigation on the cutting process stability of machine tool

Stability and Control for Cutting Chatter Based on Active Magnetic Bearings

Prediction of Time-Varying Chatter Stability: Effect of Tool Wear

Discrete Time-Delay Optimal Control Method for Experimental Active Chatter Suppression and Its Closed-Loop Stability Analysis

Stability Analysis and Test for Cutting Chatter of a Slender Shaft

Chatter stability analysis of variable speed milling with helix angled cutters

Stability Prediction of Milling Process with Closed Machining System Dynamics with Flexible Thin-Walled Workpiece

Modeling, Analysis, and Removal of Chatter Marks in Flexible Turning

Dynamics Modeling of Clamping System Considering Characteristics of the Clamping Contact Surface

Dynamic Optimum Design on Spindle Components of Numerical Controlled Machine Tools

Research on the influence of robot structural mode on regenerative chatter in milling and analysis of stability boundary improvement domain

Grade of Stability in Fuzzy Chatter Stability Lobe Model in Milling

Stability-Based Selection of Cutting Parameters to Increase Material Removal Rate in High-Speed Machining Process

Stability Analysis and Stabilization of a Class of Cutting Systems with Chatter Suppression

Analysis and Implementation for Technique for Cutting Chatter Monitoring

Stability analysis of machine tool spindle under uncertainty

Industrial Applications of Chatter Stability Prediction and Monitoring System for Turning Processes