Abstract:Piezo-driven dispensers are precision dispensing devices for trace amounts of fluid and are widely used in the microelectronics packaging field. However, the preloading mechanism of piezo-driven dispensers easily loosens in high-frequency operation, and the design accuracy of the transmission ratio of the flexible displacement transmission mechanism (DTM) requires improvement. To address the aforementioned problems, we designed a self-locking preloading mechanism with an adjustable preloading amount for piezo-driven flexible transmission dispensers and investigated the method of designing the transmission ratio considering the non-expected directional deformation (parasitic deformation). First, the principle of the preloading mechanism was analyzed, and a method for adjusting the droplet diameter based on the preloading amount was proposed. Second, an asymmetric flexible-hinge compliance matrix calculation method was proposed, a transmission ratio model of the DTM was established, and the influence law of the structural parameters on the transmission ratio was comparatively analyzed using ANSYS software. Based on the output displacement requirement, transmission ratios were designed and structural parameters were determined. Finally, based on the piezoelectric coupling simulation, a piezo-driven dispenser was manufactured, and a test platform was built to conduct the relevant tests. The simulation and test results demonstrated that the maximum relative errors of the transmission-ratio calculated by the proposed transmission-ratio model were 1.54% and 3.6 %, respectively, compared to the simulation and test results, confirming that the model was correct. Single-factor tests confirmed that a preloading mechanism can fix and preload the piezostack and that the droplet diameters can be adjusted with the preloading amounts. The operating frequency was up to 800 Hz with a diameter of 0.30 mm and a consistency of 4.32%, which meet the requirements of dispensing efficiency in the microelectronics packaging field. This study has practical significance for enhancing the transmission ratio design accuracy and dispensing performance of dispensers.

Design and Experimental Analysis of Tablets Filling Device

Design And Analysis Of Two Dimensional X-Y Micropositioning Stage

Investigation of a Complete Squeeze-Film Damping Model for MEMS Devices

Optimal Design and Experimental Study of Piezoelectric Vibrator with Multi-order Bending Mode and Multi-operating Frequency

Design and Analysis of a Micro-Vibration Driving Platform with Bidirectional Piezoelectric Actuator

Dynamics Model and Vibration Control of Piezoelectric Feeder in Semiconductor Manufacturing Assembly

Characteristics Analysis and Electrical Parameters Identification of the Rotary Piezoelectric Vibrator of the Ultrasonic Actuator

Design, modeling, analysis and testing of a novel piezo-actuated XY compliant mechanism for large workspace nano-positioning

Design and Analysis Method of Piezoelectric Liquid Driving Device with Elastic External Displacement

Design and Analysis of a Precision Multi-DOF Placement Device

Design and Experiments of a Novel Micro-Displacement Mechanism Based on Piezoelectricity Actuator

Finite Difference Based Electrical Modeling and Vibration Control Simulation of Piezoelectric Structronic Plate System

DEM Modeling and Simulation of Axial Vibration Microfeeding System

Theoretical modeling of a circular piezoelectric actuator for micro-systems

Design and Experimental Study of Ultrasonic Vibration Feeding Device with Double Symmetrical Structure

Design of Frictional Micro- Feed Mechanism Based on Piezoelectric Actuator

Design and Analysis of Micro-Feed Device for Ultraprecision Fly-Cutting Machine Tool

Finite Element Analysis and Design of Monolithic Multilayer Piezoelectric Micromanipulator

Design and performance analysis of a flexible-hinged piezoelectric driving dispenser

Fabrication and FEM Analysis of a Piezoelectric Thin-Film Microactuator

Tablet Press Model Analysis in Automated Production Equipment