Abstract:Flow fields in commercial airliner cabins are crucial for creating a thermally comfortable and healthy cabin environment. Flow fields depend on the thermo-fluid boundary conditions at the diffusers, in addition to the cabin geometry and furnishing. To study the flow fields in cabins, this paper describes a procedure to obtain the cabin geometry, boundary conditions at the diffusers, and flow fields. This investigation used a laser tracking system and reverse engineering to generate a digital model of an MD-82 aircraft cabin. Even though the measuring error by the system was very small, approximations and assumptions were needed to reduce the workload and data size. The geometric model can also be easily used to calculate the space volume. A combination of hot-sphere anemometers (HSA) and ultrasonic anemometers (UA) were applied to obtain the velocity magnitude, velocity direction, and turbulence intensity at the diffusers. The measured results indicate that the flow boundary conditions in a real cabin were rather complex and the velocity magnitude, velocity direction, and turbulence intensity varied significantly from one slot opening to another. UAs were also applied to measure the three-dimensional air velocity at 20 Hz, which could also be used to determine the turbulence intensity. Due to the instability of the flow, it should at least be measured for 4 min to obtain accurate averaged velocity and turbulence information. It was found that the flow fields were of low speed and high turbulence intensity. This study provides high quality data for validating Computational Fluid Dynamics (CFD) models, including cabin geometry, boundary conditions of diffusers, and high-resolution flow field in the first-class cabin of a functional MD-82 commercial airliner. (C) 2012 Elsevier Ltd. All rights reserved.

Global Airflow Field Distribution in a Cabin Mock-Up Measured Via Large-Scale 2D-PIV

2D-PIV measurement of aircraft cabin air distribution with a high spatial resolution

2D-PIV Experimental Study on the Air Distribution with Natural Convection Effect of Passengers in an Air Cabin Mockup

Experimental Study of Thermo-Fluid Boundary Conditions, Airflow and Temperature Distributions in a Single Aisle Aircraft Cabin Mockup

Experimental Study of Transient Air Distribution of a Jet Collision Region in an Aircraft Cabin Mock-Up

Experimental Research on the Influence of Natural Convection on the Flow Field in the Cabin Mockup

PIV experimental study of the large-scale dynamic airflow structures in an aircraft cabin: Swing and oscillation

Experimental investigation of air distribution in an airliner cabin mockup with displacement ventilation

2D-Piv Measurement of Isothermal Air Jets from A Multi-Slot Diffuser in Aircraft Cabin Environment

State-of-the-art Methods for Studying Air Distributions in Commercial Airliner Cabins

Experimental investigation of large-scale flow structures in an aircraft cabin mock-up

Transport cabin environments ACCURATE EXPERIMENTAL MEASUREMENTS OF FLOW BOUNDARY CONDITIONS FOR NUMERICAL SIMULATIONS IN AN AIRCRAFT CABIN

Experimental Simulations Of Flow Fields Within Air-Conditioning Aircraft Cabin

Experimental and Numerical Study of Airflow Distribution in an Aircraft Cabin Mockup with a Gasper On

Turbulence Characterization of Instantaneous Airflow above Passengers with Different Air Distribution Systems in a Commercial Airliner Cabin

Performance Evaluation of Different Air Distribution Systems in an Aircraft Cabin Mockup

Accurate and High-Resolution Boundary Conditions and Flow Fields in the First-Class Cabin of an MD-82 Commercial Airliner

CFD-Based Evaluation of Flow and Temperature Characteristics of Airflow in an Aircraft Cockpit

Ventilation Similarity of an Aircraft Cabin Mockup with a Real MD-82 Commercial Airliner

Various air distribution modes on commercial airplanes—Part 2: Computational fluid dynamics modeling and validation

Numerical Investigation of Airborne Contaminant Transport under Different Vortex Structures in the Aircraft Cabin