Abstract:Ventilated cavitating flows are investigated via direct numerical simulations, using a coupled level set and volume of fluid method to capture the interface between the air and water phases. A ventilated disk cavitator is used to create the cavity and is modelled by a sharp-interface immersed boundary method. The simulation data provide a comprehensive description of the two-phase flow and the air leakage and vortex shedding processes in the cavitating flow. The mean velocity of the air phase suggests the existence of three characteristic flow structures, namely the shear layer (SL), recirculating area (RA) and jet layer (JL). The turbulent kinetic energy (TKE) is concentrated in the JL in the closure region, and streamwise turbulent fluctuations dominate transverse fluctuations in both SL and JL. Budget analyses of the TKE show that the production term causes the TKE to increase in the SL due to the high velocity gradients, and decrease in the JL due to streamwise stretching effects. Air leakage and vortex shedding occur periodically in the closure region, and the one-to-one correspondence between these two processes is confirmed by the velocity and volume fluid spectra results, and the autocorrelation function of the air volume fraction. Moreover, the coherent flow structures are analysed using the spectral proper orthogonal decomposition method. We identify several fine coherent structures, including $SL_{KH}$ induced by the Kelvin–Helmholtz instability, $SL_{out}$ associated with large-scale vortex shedding, $SL_{in}$ associated with small-scale vortex shedding, and $SL_{r}$ associated with upstream turbulent convection. The present study complements previous research by providing detailed descriptions of the turbulent motions associated with the violent mixing of air and water, and the complex interactions between different characteristic structures in cavitating flows.

Flow Characteristics and Turbulence Simulation for an Aircraft Cabin Environment

Numerical Simulations of the Instantaneous Flow Fields in a Generic Aircraft Cabin with Various Categories Turbulence Models

The Large Eddy Simulation and Stability Analysis of Flow Field in A Generic Cabin

Constrained Large-Eddy Simulation and Detached Eddy Simulation of Flow Past a Commercial Aircraft at 14 Degrees Angle of Attack

Numerical Simulation of a Turbulence Flow in the Cut-off Valve by RNG k- ε Turbulence Model

A modified turbulence model for simulating airflow aircraft cabin environment with mixed convection

Assessment of Turbulence Models and Air Supply Opening Models for CFD Modelling of Airflow and Gaseous Contaminant Distributions in Aircraft Cabins

Numerical Analysis of Low-Reynolds-number Flow over Airfoil

Three dimensional turbulent flow formation and simulation analysis in airborne radar

Experimental investigation of large-scale flow structures in an aircraft cabin mock-up

On the application of statistical turbulence models to the simulation of airflow inside a car cabin

CFD-Based Evaluation of Flow and Temperature Characteristics of Airflow in an Aircraft Cockpit

Cfd Simulation And Validation For Mixing Ventilation Scaled-Down Empty Aircraft Cabin Using Openfoam

Fem Simulation Of Turbulent Flow In A Turbine Blade Passage With Dynamical Fluid-Structure Interaction

Simulation-based Study of Low-Reynolds-number Flow Around a Ventilated Cavity

Assessment of turbulence models and mesh types for the simulation of multi-body separation by coupling the CFD and rigid body dynamics

Numerical Simulation and Characteristic Analysis of Ship's Air Flow Field

Simulation of Flow Field and Heat Transfer in Passenger Compartment

Various air distribution modes on commercial airplanes—Part 2: Computational fluid dynamics modeling and validation

Numerical Simulation and Dynamical Analysis of Atmospheric Turbulence Influence on the Aircraft Bumps

Numerical investigation on aerodynamic performance of a standard model CHN-T1 using an unstructured flow solver