Abstract:Abstract The main aim of this study is to develop a mathematical size-dependent vehicle cabin model for particulate matter concentration including PM 2.5 (particles of aerodynamic diameter less than 2.5 μm) and UFPs (ultrafine particles of aerodynamic diameter less than 100 nm), as well as CO 2 concentration. The ventilation airflow rate and cabin volume parameters are defined from a previously developed vehicle model for climate system design. The model simulates different filter statuses, application of pre-ionization, different airflow rates and recirculation degrees. Both particle mass and count concentration within 10–2530 nm are simulated. Parameters in the model are defined from either available component test data (for example filter efficiencies) or assumptions from corresponding studies (for example particle infiltration and deposition rates). To validate the model, road measurements of particle and CO 2 concentrations outside two vehicles were used as model inputs. The simulated inside PM 2.5 , UFP and CO 2 concentration were compared with the inside measurements. Generally, the simulation agrees well with measured data (Person’s r 0.89–0.92), and the simulation of aged filter with ionization is showing higher deviation than others. The simulation using medium airflows agrees better than the simulation using other airflows, both lower and higher. The reason for this may be that the filter efficiency data used in the model were obtained at airflows close to the medium airflow. When all size bins are compared, the sizes of 100–300 nm were slightly overestimated. The results indicated that among others, expanded filter efficiency data as a function of filter ageing and airflow rate would possibly enhance the simulation accuracy. An initial application sample study on recirculation degrees presents the model’s possible application in developing advanced climate control strategies.

Large-scale PIV measurements of ventilation flow inside the passenger compartment of a real car

Experimental Characterization of the Airflow within a Car Cabin

Evaluation of the airflow distribution of a vertical air ventilation system in a car cabin using PIV measurements and CFD simulations

2D-PIV measurement of aircraft cabin air distribution with a high spatial resolution

Large-Scale Measurements Using Robotic Volumetric LPT With Shake-The-Box Inside A Vehicle Cabin: Influence Of Different Fan Speeds On The Flow Topology

On the effectiveness of Reynolds-averaged and subgrid scale models in predicting flows inside car cabins

Experimental and numerical study of the flow dynamics and thermal behavior inside a car cabin: Innovative air diffusers and human body plumes interactions

Size-resolved simulation of particulate matters and CO2 concentration in passenger vehicle cabins

Experimental and Numerical Study of Air Flow and Temperature Variations in an Electric Vehicle Cabin During Cooling and Heating

Experimental investigation of large-scale flow structures in an aircraft cabin mock-up

A Study of Passenger Car Cabin Pre-Ventilation under the Sun

Impact of realistic boundary conditions on CFD simulations: A case study of vehicle ventilation

Experimental investigation of air distribution in an airliner cabin mockup with displacement ventilation

New ventilation schemes of car cabin evaluated by CFD simulations

Simulation and Experimental Study on Thermal State of Engine Compartment of Commercial Vehicle

Research on the thermal comfort of passenger compartment based on the PMV/PPD

The airflow characteristics and thermal comfort evaluation in high-speed train cabin with mixing ventilation: An experimental and numerical study

Real-time indoor environment quality monitoring for vehicle cabin

Effects of HVAC Design Parameters on Passenger Thermal Comfort

Test Rig Design Considerations to Detect Volatile Organic Compounds in Aircraft Cabins

Investigation of air conditioning temperature variation by modifying the structure of passenger car using computational fluid dynamics