Abstract:This study focuses on the validation of a volumetric measurement technique to characterize the turbulent boundary layers (TBL) and wake of a slender axisymmetric body. Specifically, Lagrangian Particle Tracking (LPT) was employed to analyse a TBL subjected to an adverse pressure gradient (APG) and transverse curvature at the tail of an axisymmetric body, with a Reynolds number based on model length of 3.95×10 6 . For the LPT method, a seeding rake with 100 nozzles was used to disperse helium-filled soap bubbles (HFSB), which served as tracers. These tracers were illuminated by high-powered LED arrays, allowing their motion to be captured by three high-speed cameras at acquisition rates up to 20 kHz. A key aspect of this research was using shadowgraphy to measure the diameter of the bubbles exiting the nozzles and obtaining their statistical variations across the various nozzles in the seeding rake. The study identified that the diameter of bubbles averaged 0.45 mm, indicating a state of near-neutral buoyancy. The LPT results were then obtained using the shake-the-box (STB) tracking alogirthm, while ensemble bin-averaging of the scattered particle tracks was used to obtain turbulence statistics on a regular grid. To validate the LPT results, comparisons were made with time-resolved 2D Particle Image Velocimetry (TR-PIV) and highly resolved hot-wire anemometry. This comparative analysis revealed good agreement of the mean profiles across the methodologies, highlighting the robustness and accuracy of the LPT technique. While the turbulence levels in the outer layer were well captured by the LPT, some discrepancies were observed near the wall in both PIV and LPT data, indicating limitations in capturing small-scale phenomena. The implications of these findings, particularly in understanding the complex 3D flow effects of such TBLs and the resulting wake flow field are discussed.

Large-Scale Measurements Using Robotic Volumetric LPT With Shake-The-Box Inside A Vehicle Cabin: Influence Of Different Fan Speeds On The Flow Topology

Volumetric Three-Component Velocimetry: a New Tool for 3D Flow Measurement

Temperature- and Pressure-Sensitive Paint Measurements in Short-Duration Hypersonic Flow

Experimental Characterization of the Airflow within a Car Cabin

Large-scale PIV measurements of ventilation flow inside the passenger compartment of a real car

Measurements of 3D Flow in a Micro-Pipe Via Micro Digital Holographic Particle Tracking Velocimetry

Measurements of Three-Dimensional Flow in Microchannel with Complex Shape by Micro-Digital-Holographic Particle-Tracking-Velocimetry

Three-Dimensional Measurements in Micro Flow with High-time Resolution Via Digital Holography

On-Site Characterization of Automotive Diffuser Aerodynamics by 3D LPT

Experimental investigation of large-scale flow structures in an aircraft cabin mock-up

Validating Volumetric Measurements Using Helium-Filled Soap Bubbles in a Turbulent Boundary Layer And Wake Of An Axisymmetric Body Of Revolution

Dual-camera Off-Axis Holographic Particle Tracking Velocimetry: Development and Application to Air-Blast Swirl Spray Measurement

On the use of helium-filled soap bubbles for large-scale tomographic PIV in wind tunnel experiments

Three-Dimensional Measurements of Microbubbles in A Turbulent Pipe Flow by Digital-Holographic Ptv

Three-dimensional Measurement with Two Cameras of a Turbulent Pipe Flow by Digital Holographic-Ptv

Experimental and Numerical Investigation on the Cavity Regime and Drag Reduction of Ventilated Partial Cavity

2D-PIV measurement of aircraft cabin air distribution with a high spatial resolution

Coaxial volumetric velocimetry

Measurement of airflow pattern induced by ceiling fan with quad-view colour sequence particle streak velocimetry

Evaluation of the airflow distribution of a vertical air ventilation system in a car cabin using PIV measurements and CFD simulations

A cryogenic-helium pipe flow facility with unique double-line molecular tagging velocimetry capability