Abstract:The vapor-box is a liquid metal based design to cope with the demanding conditions of the divertor. This design relies on the recirculation of lithium by evaporation and condensation. An issue to this approach is the safety risks of Li-D/T formation and co-deposition on both the vapor-box walls - leading to possible recirculation impedance- and on the first wall leading to unacceptable tritium retention. Additively manufactured tungsten Capillary Porous Structure (CPS) samples filled with Li were exposed to high heat flux D plasmas in the linear plasma device Magnum-PSI and Li-D co-deposition was measured as a function of substrate temperature, estimated to be in the range 200-428 C and distance between 25-85 mm to the plasma beam center. The D:Li ratio was determined via in-situ ion beam diagnostics (NRA and EBS) and the spectra analyzed simultaneously to maximise the precision of the measurement. The experimental results approach close to the theoretical maximum at 40:60 D:Li ratio and the thickness of the deposited films was 0.02 - 3.2 m. For witness plate temperatures above 400 C Li films under 150 nm in thickness were deposited and show lower D:Li ratios, as low as 5:95 D:Li ratio. At these temperatures the evaporation rate from the WPs is close to the deposition rate, and the decomposition pressure for LiD becomes comparable to the operational pressure in the vessel during the discharge. SOLPS-ITER simulations were also conducted to complement the experimental data. The results were used to narrow the range of CPS surface temperature to between ^{\circ} ^{+} ^{+} \%$, which matches well with the value determined from a quartz crystal microbalance. Due to limitations in the modeling of neutral interactions with Li coated surfaces, the SOLPS-ITER modeling does not well recreate the observed Li and D deposition layers on the WPs, indicating that this aspect of the modeling in Eirene needs improvement to accurately model plasmas containing significant quantities of Li. However, SOLPS-ITER simulations should be extended to include LiD molecules and improve the accuracy of heat flux towards the target to improve the comparison with experimental data.

Dynamical Saturated Concentration of Deuterium in a Beryllium Foil Studied by Low Energy D(d,p)T Reaction

Influence of neon seeding on the deuterium retention and surface modification of ITER-like forged tungsten

Deuterium Retention and Ammonia Production from D-implanted 316L Stainless Steel: Insights for Future Fusion Reactors

Deuterium retention properties of vanadium beryllide (Be 12 V) for advanced neutron multiplier applications

Depth concentrations of deuterium ions implanted into some pure metals and alloys

Deuterium transport and retention properties of representative fusion blanket structural materials

Deuterium Retention in Heavy-Ion and Helium-Ion Sequentially Irradiated Tungsten

Surface Modification and Deuterium Retention of High Energy Rate Forging W-Y2O3exposed to Deuterium Plasma

Study on interaction of the deuterium ion beam and the drive-in titanium target

Temperature Dependence of Retention of Energetic Deuterium and Carbon Simultaneously Implanted into Tungsten

Experimental Measurement of Deuterium Concentration and Depth Profiling in Tungsten by Radio Frequency Glow Discharge Optical Emission Spectroscopy

Combination of in-situ ion beam analysis and thermal desorption spectroscopy for studying deuterium implanted in tungsten

Deuterium Retention in Sic-Coated Graphite Tiles of East

Deuterium retention and thermal conductivity in ion-beam displacement-damaged tungsten

Deuterium Retention in Tungsten Films Deposited by Magnetron Sputtering

Characterization on deuterium retention in tungsten target using spatially resolved laser induced desorption-quadrupole mass spectroscopy

Dynamics Of Hydrogen Isotope Trapping And Detrapping For Tungsten Under Simultaneous Triple Ion (C+, D-2(+) And He+) Implantation

Axial Concentration of Dissolved Deuterium by Dispersion in a LiPb Experimental Loop

Microstructure Evolution and Effect on Deuterium Retention in Oxide Dispersion Strengthened Tungsten During He+ Irradiation

Investigations into penetration depth profiles of hydrogenic species in beryllium plasma-facing components via molecular dynamics simulations

Deuterium retention in co-deposition with lithium in Magnum-PSI: experimental analysis and comparison with SOLPS-ITER