Abstract:High Performance Polymers, Ahead of Print. To achieve increased flow and reduce fouling, polymeric membranes can be functionalized with hydrophilic groups such as sulfone, amines, and others. This research has aimed at the sulfonation of Polysulfone (PSU) with various agents and at varying substitution degrees to change its hydrophobic character. PSU was also blended with Poly(lactic acid) (PLA), which is a more hydrophilic polymer. The phase inversion method was used to make PSU, PLA, sulfonated PSU, and PSU/PLA blend-based membranes. Sulfonation degrees of sulfonated PSU membranes were assessed using FT-IR, mechanical characteristics of membranes were determined, and thermal properties of membranes were clarified using DSC and TGA techniques. Hydrophilic natures and membrane alterations were investigated, as well as contact angle and water uptake measures. Among three distinct sulfonation agents (trimethylsilyl chlorosulfonate (TMSCS), sulfuric acid, and chlorosulfonic acid) employed to produce a 20% sulfonation degree of polysulfone, TMSCS was chosen as having the highest sulfonation efficiency (91.5%). With increasing sulfonation degree, a drop in molecular weight was seen in all sulfonated polysulfone samples. The mechanical strength values of polysulfone after sulfonation with TMSCS rose from 35.23 MPa to 63.35 MPa, while the contact angle value decreased from 85.58° to 71°. The contact angle value reduced from 85.58° to 64.68° while the mechanical strength of the PSU and PSU/PLA (50:50) blend increased from 35.23 MPa to 39.3 MPa. Membranes were also tested for pure water flux, hydrostability, and biostability. In terms of application requirements, it was determined that sulfonated PSU-based membranes manufactured with TMSCS with a 20% sulfonation degree and PSU/PLA blend-based membranes with a 50:50 (w:w) ratio have the optimum compositions with high flux quantities.

Facile Chemical Modification of Polysulfone Membrane with Improved Hydrophilicity and Blood Compatibility

PC Technology Improving the Hemocompatibility of Polymer Membranes Developed for Biomedical Application

Hydrophilic modification of a PSU membrane with block copolymer of PS-b-SBMA

Anionic glycosylated polysulfone membranes for the affinity adsorption of low-density lipoprotein via click reactions

New-Type Sulphonated Polymer Surfaces for Improving Blood Compatibility

Improving Hemocompatibility of Polysulfone Membrane by UV-Assisted Grafting of Sulfonated Chitosan

Chemical modification of polysulfone membrane by polyethylene glycol for resisting drug adsorption and self-assembly of hepatocytes

Engineering of hemocompatible and antifouling polyethersulfone membranes by blending with heparin-mimicking microgels

Cytocompatibility of new-type sulfonated polymer surfaces

Facile surface modification of silicone rubber with zwitterionic polymers for improving blood compatibility.

Surface modification of polysulfone hollow fiber membrane for extracorporeal membrane oxygenator using low-temperature plasma treatment

Facile Preparation of Heparinized Polysulfone Membrane Assisted by Polydopamine/Polyethyleneimine Co-Deposition for Simultaneous Ldl Selectivity and Biocompatibility

Modification of chitosan membrane with poly(vinyl alcohol) and biocompatibility evaluation

Improving the hydrophilicity and fouling-resistance of polysulfone ultrafiltration membranes via surface zwitterionicalization mediated by polysulfone-based triblock copolymer additive

Fabrication and Study of Dextran/Sulfonated Polysulfone Blend Membranes for Low-Density Lipoprotein Adsorption

A Novel Polysulfone-Based Affinity Membrane with High Hemocompatibility: Preparation and Endotoxin Elimination Performance

Interfacial Interaction between Functionalization of Polysulfone Membrane Materials and Protein Adsorption

Hydrophilicity and flux properties improvement of high performance polysulfone membranes via sulfonation and blending with Poly(lactic acid)

An Extending of Candidate for the Hydrophilic Modification of Polysulfone Membranes from the Compatibility Consideration: the Polyethersulfone-Based Amphiphilic Copolymer As an Example

Enhancement of Hydrophilicity and Anti-Fouling Property of Polysulfone Membrane Using Amphiphilic Nanocellulose As Hydrophilic Modifier

On the surface hydrophilization of a blended polysulfone membrane: atomic force microscopy measurement and molecular dynamics simulation