Abstract:Homogeneous mesoporous lignocellulose aerogels were prepared from hardwood using 1-allyl-3-methylimidazolium chloride (AMImCl) as an ionic liquid (IL) via cyclic liquid nitrogen freezing-thawing (NFT, from -196 degrees C to 20 degrees C) treatment processes. The obtained hydrogels after NFT treatment were solvent-exchanged by acetone, washed with liquid carbon dioxide and then dried by releasing the carbon dioxide at the critical temperature. It was observed that the obtained aerogels after five-cycles of NFT treatment had open-structured 3-dimensional (3D) fibril-like networks. The surface areas and pore size distributions could be adjusted by controlling the NFT treatment cycles. However, the samples treated by common freezing-thawing (FT, from -20 degrees C to 20 degrees C) displayed a film-like 2D structure and low surface area. This may be ascribed to the difference of the assembled 'secondary units' formed during the freezing process. For instance, in the NFT process, 3D-like 'secondary assembly units' were squeezed out by small IL crystals formed during the ultra low temperature freezing process. These 'secondary assembly units' were able to build a large 3D network through the connection and overlap effect with cyclic NFT processes. However, the assembled 2D-like 'secondary assembly units' were squeezed out by large IL crystals in the common FT process due to the slow freezing process and finally were developed to a film-like structure. These 'secondary assembly units' could be linked together in a slow thawing process to form compact aerogels. This study provides a new means to fabricate novel mesoporous lignocellulose aerogels, which is crucial to fully utilize abundant lignocellulose biomass. The homogeneous mesoporous aerogels can be used as highly insulating materials with low thermal conductivity and also have appealing performance in sound absorption and noise reduction properties.

Facile synthesis of strong alumina–cellulose aerogels by a freeze-drying method

Constructing Cellulose Diacetate Aerogels with Pearl-Necklace-like Skeleton Networking Structure

Synthesis of Alumina Aerogels by Ambient Drying Method and Control of Their Structures

Strong, Lightweight, and Shape-Memory Bamboo-Derived All-Cellulose Aerogels for Versatile Scaffolds of Sustainable Multifunctional Materials

Synthesis of alumina aerogel enriched carboxymethyl cellulose with polymodal pore size distribution by ambient pressure drying

Cellulose Aerogels from Aqueous Alkali Hydroxide–Urea Solution

Preparation of ambient-dried multifunctional cellulose aerogel by freeze-linking technique

Cellulose Diacetate Aerogels with Low Drying Shrinkage, High-Efficient Thermal Insulation, and Superior Mechanical Strength

Synthesis and Anisotropic Properties of Alumina-Silica Aerogels Constructed by Silica Sols Infiltrated into Unidirectional Frozen Alumina Templates

Synthesis of alumina aerogels from AlCl 3 ·6H 2 O with an aid of acetoacetic-grafted polyvinyl alcohol

Preparation and characterization of cellulose/attapulgite composite aerogels with high strength and hydrophobicity

Fabrication of Elastic Silica-Bacterial Cellulose Composite Aerogels with Nanoscale Interpenetrating Network by Ultrafast Evaporative Drying

Preparation and Characterization of Alumina-coated Hollow Quartz Fiber Reinforced Al2O3-SiO2 Aerogel Composite

Cellulose-Silica Composite Aerogels Prepared with Sodium Silicate by Freeze Drying Method

Facile preparation of Bacterial cellulose‐SiO2 composite aerogel with good mechanical strength and thermal stability

Preparation of mechanically strong and lightweight cellulose aerogels from cellulose-NaOH/PEG solution

Preparation and Characterization of C/Al 2 O 3 Composite Aerogel with High Compressive Strength and Low Thermal Conductivity

Lignocellulose Aerogel from Wood-Ionic Liquid Solution (1-Allyl-3-methylimidazolium Chloride) under Freezing and Thawing Conditions.

In-situ Synthesis and Structural Characterization of Cellulose-Silica Aerogels by One-Step Impregnation

Silica-Bacterial Cellulose Composite Aerogel Fibers with Excellent Mechanical Properties from Sodium Silicate Precursor

Fabrication of Mesoporous Lignocellulose Aerogels from Wood Via Cyclic Liquid Nitrogen Freezing–thawing in Ionic Liquid Solution