Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

Improving solution-processed n-type organic field-effect transistors by transfer-printed metal/semiconductor and semiconductor/semiconductor heterojunctions

Improving Charge Injection for Organic Field‐Effect Transistor Array via Chemical Functionalized Van der Waals Top‐Contacts

Improving the Charge Injection in Organic Transistors by Covalently Linked Graphene Oxide/Metal Electrodes

Editorial: High-Performance Organic Thin-Film Transistors

Designing Contact Independent High‐Performance Low‐Cost Flexible Electronics

Reduced contact resistance in top-contact organic field-effect transistors by interface contact doping

Organic-semiconductor: Polymer-electret Blends for High-Performance Transistors

Dopant/Semiconductor/Electret Trilayer Architecture for High‐Performance Organic Field‐Effect Transistors

Tuning Electrode Work Function and Surface Energy for Solution Shearing High-Performance Organic Field-Effect Transistors

Driving Organic Field-Effect Transistors: Enhancing Crystallization and Electrical Performance with Blends and Inkjet Printing

Polymeric Semiconductor/graphene Hybrid Field-Effect Transistors

Improving Electron Injection of Organic Light-Emitting Transistors via Interface Layer Design

Enhanced Polymer Thin Film Transistor Performance by Carefully Controlling the Solution Self‐Assembly and Film Alignment with Slot Die Coating

Ultralow contact resistance in organic transistors via orbital hybridization

Extracting contact effects in organic field-effect transistors

On the Nature of Charge-Injecting Contacts in Organic Field-Effect Transistors

Interface engineering to enhance charge carrier injection in Ph-BTBT-10 organic thin-film transistor with silver source-drain electrodes

Soft-Etching Copper and Silver Electrodes for Significant Device Performance Improvement Toward Facile, Cost-Effective, Bottom-Contacted, Organic Field-Effect Transistors.

C8‐BTBT‐C8 Thin‐Film Transistors Based on Micro‐Contact Printed PEDOT:PSS/MWCNT Electrodes

Interface Engineering of Semiconductor/Dielectric Heterojunctions Toward Functional Organic Thin-Film Transistors

A Stable Solution-Processed Polymer Semiconductor with Record High-Mobility for Printed Transistors