Abstract:This study encompasses the development of high-performance PC/ABS blends utilizing recycled PC (r-PC) and recycled ABS (r-ABS) polymers from waste electric and electronic equipment (WEEE) fractions heavily contaminated by flame retardants (FRs). Upgrading of mechanical properties was facilitated by addition of virgin ABS and additives. In total three different WEEE fractions -containing high concentrations of bromine, chloride and phosphorous were purified from polymers other than PC and decontaminated from halogenated contaminants by dissolution-precipitation CreaSolv® Process. In two studied cases the WEEE fractions were optically pre-sorted for PC before purification and decontamination. Gas chromatography (GC-ECD) and X-ray fluorescence (XRF) analyses were performed to validate efficient removal of contaminants from r-PC. The targeted mechanical properties of polymers to upgrade are notched impact strength and elastic moduli. Upgrading was achieved by using the suitable compatibilizers, and, optionally by a chain extender. First, small-scale laboratory screening test series were conducted for three compatibilizers and different ABS polymers based on micro-compounding experiments. Upscaling test series based on the pre-screening data was then organized on a conventional bench scale twin-screw extruder. SEM microstructural characterizations of the blend morphology and fractured surfaces are done to correlate structure to the mechanical properties.Dynamic mechanical analysis (DMA) and Rheological Dynamic Analysis (RDA) and Gel permeation chromatography (GPC) provided some insight to the chain branching and molecular weight distribution of r-PC, respectively. Moreover, melt rheology and solid-state mechanical properties of the compatibilized r-PC/ABS blend were thoroughly investigated. Addition of virgin ABS polymer and a suitable compatibilizer enhance the properties of the recycled PC/ABS 60/40 blends towards virgin-like, allowing easily >55% r-PC content, or in favourable cases much higher than 75% recycled polymer content when applying significant concentration of recycled ABS from CreaSolv® together with some virgin ABS.

Morphology, Mechanical and Thermal Properties of Recycled Pc/Abs Blends Processed Via Vane Extruder

Properties and Structure of Recycled PC/Recycled ABS Blend System

Microscopic morphology, rheological behavior, and mechanical properties of polymers: Recycled acrylonitrile-butadiene-styrene/polybutylene terephthalate blends

Blends of rABS and SEBS: Influence of In-Situ Compatibilization on the Mechanical Properties

Preparation, mechanical, and thermal properties of biodegradable polyesters/poly(lactic acid) blends

Mechanical, Thermal and Rheological Properties and Morphology of Poly (lactic Acid)/Poly (propylene Carbonate) Blends Prepared by Vane Extruder

Recycled Polycarbonate/acrylonitrile–butadiene–styrene Reinforced and Toughened Through Chemical Compatibilization

Mechanical and thermal properties of polybutylene terephthalate/ethylene-vinyl acetate blends using vane extruder

Pithecellobium Clypearia Benth Fiber/Recycled Acrylonitrile-Butadiene-Styrene (ABS) Composites Prepared in a Vane Extruder: Analysis of Mechanical Properties and Morphology

Optimization of physical and mechanical properties of PC/ABS/PMMA blends by mixture design approach

Poly(Lactic Acid)/Polypropylene and Compatibilized Poly(Lactic Acid)/Polypropylene Blends Prepared by A Vane Extruder: Analysis of the Mechanical Properties, Morphology and Thermal Behavior

Compatibilized PC/ABS blends from solvent recycled PC and ABS polymers from electronic equipment waste

An effective sustainable approach towards recycling and value addition of waste poly(vinyl chloride) and acrylonitrile butadiene styrene (ABS) recovered from electronic waste (e-waste)

Upcycling of Poly(Lactic Acid) by Reactive Extrusion with Recycled Polycarbonate: Morphological and Mechanical Properties of Blends

Synergistic Enhancement in Tensile Strength and Ductility of ABS by Using Recycled PETG Plastic

Reparation of Recycled Acrylonitrile-Butadiene-Styrene by Pyromellitic Dianhydride: Reparation Performance Evaluation and Property Analysis

Morphology, Mechanical, and Rheological Properties of Poly(lactic Acid)/ethylene Acrylic Acid Copolymer Blends Processing Via Vane Extruder

Preparation, Mechanical and Thermal Properties of PLA/PBAT/EGMA Blends

Processability, property, and morphology of biodegradable blends of poly(propylene carbonate) and poly(ethylene-co-vinyl alcohol)

Three-dimensional printing with waste acrylonitrile butadiene styrene: Processing and characterization

Miscibility, properties and morphology of biodegradable blends of UHMW-PPC/PVA/EVOH