Abstract:This study encompasses the development of high-performance PC/ABS blends utilizing recycled PC (r-PC) and recycled ABS (r-ABS) polymers from waste electric and electronic equipment (WEEE) fractions heavily contaminated by flame retardants (FRs). Upgrading of mechanical properties was facilitated by addition of virgin ABS and additives. In total three different WEEE fractions -containing high concentrations of bromine, chloride and phosphorous were purified from polymers other than PC and decontaminated from halogenated contaminants by dissolution-precipitation CreaSolv® Process. In two studied cases the WEEE fractions were optically pre-sorted for PC before purification and decontamination. Gas chromatography (GC-ECD) and X-ray fluorescence (XRF) analyses were performed to validate efficient removal of contaminants from r-PC. The targeted mechanical properties of polymers to upgrade are notched impact strength and elastic moduli. Upgrading was achieved by using the suitable compatibilizers, and, optionally by a chain extender. First, small-scale laboratory screening test series were conducted for three compatibilizers and different ABS polymers based on micro-compounding experiments. Upscaling test series based on the pre-screening data was then organized on a conventional bench scale twin-screw extruder. SEM microstructural characterizations of the blend morphology and fractured surfaces are done to correlate structure to the mechanical properties.Dynamic mechanical analysis (DMA) and Rheological Dynamic Analysis (RDA) and Gel permeation chromatography (GPC) provided some insight to the chain branching and molecular weight distribution of r-PC, respectively. Moreover, melt rheology and solid-state mechanical properties of the compatibilized r-PC/ABS blend were thoroughly investigated. Addition of virgin ABS polymer and a suitable compatibilizer enhance the properties of the recycled PC/ABS 60/40 blends towards virgin-like, allowing easily >55% r-PC content, or in favourable cases much higher than 75% recycled polymer content when applying significant concentration of recycled ABS from CreaSolv® together with some virgin ABS.

Optimization of physical and mechanical properties of PC/ABS/PMMA blends by mixture design approach

Mechanical Recycling of Post-Industrial PC/ABS Blends from the Automotive Sector by Mixture Design

Compatibilized PC/ABS blends from solvent recycled PC and ABS polymers from electronic equipment waste

Mechanical and thermal properties of bio-based polycarbonate/acrylonitrile-styrene-acrylate blends

Experimental study on mechanical behaviors of injection molded PC/PMMA blends

Research on effect of ABS,MAH,DCP on property of PA6/ABS blend

Assessment of the mechanical properties of PC/ABS blends for functional prototyping by FFF 3D printing

Optimization of Fused Deposition Modeling Process Parameters and Dynamic Mechanical Analysis of 3D Printed Polycarbonate/Acrylonitrile-Butadiene-Styrene Composite Loaded with Tetrabromobiphenol-A and Microcrystalline Cellulose

Mechanical, physical and thermal properties of waste polypropylene/polystyrene/natural rubber (wPP/PS/NR) blends

High-strength and super-tough PA6/PS/PP/SEBS quaternary blends compatibilized by using a highly effective multi-phase compatibilizer: Toward efficient recycling of waste plastics

A Promising Recycling Strategy via Processing Polypropylene/Recycled Poly(ethylene terephthalate): Reactive Extrusion Using Dual Compatibilizers

Recycled Polycarbonate/acrylonitrile–butadiene–styrene Reinforced and Toughened Through Chemical Compatibilization

Optimization of the injection molding process for the PC/ABS parts by integrating Taguchi approach and CAE simulation

Performance Analysis of Acrylonitrile–Butadiene–Styrene–Polycarbonate Polymer Blend Filament for Fused Deposition Modeling Printing Using Hybrid Artificial Intelligence Algorithms

Upcycling of Poly(Lactic Acid) by Reactive Extrusion with Recycled Polycarbonate: Morphological and Mechanical Properties of Blends

Building Blend from Recycling Acrylonitrile–butadiene–styrene and High Impact-Resistance Polystyrene Through Dextro-Glucose

A Dynamic Mechanical Analysis on the Compatibilization Effect of Two Different Polymer Waste-Based Compatibilizers in the Fifty/Fifty Polypropylene/Polyamide 6 Blend

Improving 3D printability and interlayer adhesion in ABS/PP immiscible polymer blends

Assessment of Physio-Mechanical characteristics of ABS/PETG blended parts fabricated by Material Extrusion 3D printing

Creating Super-Tough and Strong PA6/ABS Blends Using Multi-Phase Compatibilizers

The impact of injection molding process parameters on mechanical properties and microstructure of PC/ABS blends using Taguchi approach