Abstract:Polyether ketone ketone (PEKK) is a high-performance thermoplastic used in the fused filament fabrication (FFF) process to manufacture end use parts for the biomedical and aerospace industries. While other high-performance polymers such as polyetherimide (PEI) and polyether ether ketone (PEEK) have been studied extensively in literature, minimal studies have investigated the effects of FFF process parameters on PEKK. Tensile properties of FFF-printed PEKK was most affected by build orientation followed by number of contours in our previous study, although effects of build orientation on various properties of materials have been examined extensively, only few studies focused on number of contours. This study aims to understand if the selected parameters from our previous study affect other properties of PEKK, and if employing more contours can further improve these properties. A Taguchi orthogonal array varying contours in 4 levels and all other factors in 2 levels were used for this study. Optimum process parameters that maximize properties including compressive, flexural, thermomechanical, dynamic mechanical, and surface roughness were determined, and samples were printed using those settings to verify the statistical model. For the first time in literature, analysis was performed to understand if process parameters affected porosity and that, in turn, influenced mechanical properties. Comparison of flexural properties with injection-molded counterparts revealed that through optimization of process parameters, even the cost-effective printers used in this study could produce parts with properties almost equal to injection-molded parts in the direction of measurement. In addition, a coefficient of linear thermal expansion varied significantly with changes in process parameters and the variation was attributed mostly to porosity within samples and alignment of rasters with the direction of measurement. A clear relationship between number of contours, porosity, and mechanical properties was observed for most responses. Overall, number of contours was the most significant process parameter as more contours reduced porosity and improved mechanical and dynamic mechanical properties.

Optimization of Fused Deposition Modeling Process Parameters and Dynamic Mechanical Analysis of 3D Printed Polycarbonate/Acrylonitrile-Butadiene-Styrene Composite Loaded with Tetrabromobiphenol-A and Microcrystalline Cellulose

Effect of Fused Filament Fabrication Parameters and Tetrabromobisphenol-A/Microcrystalline Cellulose Additives on the Dynamic Mechanical Behavior of Polycarbonate/Acrylonitrile–Butadiene–Styrene Blends for Precision Structures

3D Printing Parameter Optimization Using Taguchi Approach to Examine Acrylonitrile Styrene Acrylate (ASA) Mechanical Properties

Effect of process parameters on flexural strength and surface roughness in fused deposition modeling of PC-ABS material

Optimization of Fused Deposition Modelling Acrylonitrile-co-Butadiene-co-Styrene Parameters using ANOVA and Hybrid GRA–TOPSIS

Synthesis and Investigation of Mechanical Properties of the Acrylonitrile Butadiene Styrene Fiber Composites Using Fused Deposition Modeling

Pattern optimization for 3D printing of composite filament materials with natural fibers and polylactic acid

Evolution of microstructure and thermo‐mechanical attributes of fiber reinforced polyamide during fused deposition modeling 3D printing: A comprehensive characterization study

Optimisation of process parameters for dimensional stability in FDM

Performance Analysis of Acrylonitrile–Butadiene–Styrene–Polycarbonate Polymer Blend Filament for Fused Deposition Modeling Printing Using Hybrid Artificial Intelligence Algorithms

On the Effects of Process Parameters and Optimization of Interlaminate Bond Strength in 3D Printed ABS/CF-PLA Composite

Investigation of Fused Deposition Modelling Process Parameters in 3D Printing for Composite Material (Poly Lactic Acid and Banana Fibre)

Optimization of FDM 3D printing process parameters for multi-material using artificial neural network

Experimental Study of the Wear Performance of Fused Deposition Modeling Printed Polycarbonate-Acrylonitrile Butadiene Styrene Parts Using Definitive Screening Design and Machine Learning-Genetic Algorithm

Assessment of the mechanical properties of PC/ABS blends for functional prototyping by FFF 3D printing

Process parametric optimization of fused deposition modeling for manufacturing of acrylonitrile butadiene styrene parts

Can a Black-Box AI Replace Costly DMA Testing?—A Case Study on Prediction and Optimization of Dynamic Mechanical Properties of 3D Printed Acrylonitrile Butadiene Styrene

Optimization of printing parameters in fused deposition modeling for improving part quality and process sustainability

Optimization of material extrusion additive manufacturing process parameters for polyether ketone ketone (PEKK)

Statistical analysis and multi-criteria optimization of fused deposition additive manufacturing process for acrylic butadiene styrene parts

Optimization of 3D Printing Parameters for Enhanced Surface Quality and Wear Resistance