Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. The accuracy of machining can be predicted during the design process of CNC machine tools, while the prediction accuracy depends on the prediction model. However, when establishing the prediction model, the coupling effect among the machine tool's different components is always ignored for modeling efficiency, so this will lead to its reliability cannot be guaranteed. To address this problem, the model reduction theory and the lumped parameter method are used in this study to set the state-space equations of the essential structural parts. Moreover, the electro-mechanical coupling parameter equation of the servo system is transformed into a state-space equation. Then the state-space equations of the components and the servo system are coupled to establish the machine tool dynamic model. Furthermore, a theoretical model of instantaneous undeformed chip thickness is found, and according to the linear relationship between the micro-cutting force and the instantaneous undeformed chip thickness, the instantaneous cutting force model of the cylindrical milling cutter is established. Based on these, the integrated model, which considers the mechanical structure, control system and cutting force, is obtained and further used in Simulink to build the machining accuracy prediction platform, as well as the accuracy of the integrated prediction model is verified. Moreover, the prediction model established by the integrated modeling method can effectively simulate the actual machining conditions of the machine tool, and the superiority of prediction is confirmed by comparing the simulated and measured results in peripheral milling applications. The results show the error in the system response efficiency is 14.8%, while the error in position accuracy and delay characteristics is less than 10%, the error between the predicted size of the prediction model and the actual size is within 28 μm, a minimum prediction error is 7 μm.

Motor Current-Based Cutting Force Induced Error Detection and Modeling for Cnc Milling Machine

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

Support Vector Machines-Based Method for Machining Error Prediction Modeling

Error Analysis and Compensation Method for Motion Errors of NC Machine Tools under Cutting Loads

Dynamic Cutting Force Modeling and Experimental Study of Industrial Robotic Boring

High-accurate Cutting Forces Estimation by Machine Learning with Voice Coil Motor-Driven Fast Tool Servo for Micro/nano Cutting

An Integrated Model Based Prediction of Machining Accuracy for Milling Machine

Experimental analysis and modeling of cutting power model

An Error Prediction Model of NC Machining Process Considering Multiple Error Sources

Geometric Error Contribution Modeling and Sensitivity Evaluating for Each Axis of Five-Axis Machine Tools Based on POE Theory and Transforming Differential Changes Between Coordinate Frames

Synthetic Error Modeling for NC Machine Tools Based on Intelligent Technology

Volumetric Error Modeling And Analysis For Cnc Machine Tool Based On Multi-Body System

Influence of Tool Assembly Error on Machined Surface in Peripheral Milling Process

Energy modeling and a method for reducing energy loss due to cutting load during machining operations

Adaptive Dynamic Cutting Force Control Analysis for Peripheral Milling

A Dynamic Linearization Modeling of Thermally Induced Error Based on Data-Driven Control for CNC Machine Tools

Predictive Model of Milling Force for Complex Profile Milling

A real time machining error compensation method based on dynamic features for cutting force induced elastic deformation in flank milling

Online Modeling of the CNC Engraving System With Dead-Zone Input Nonlinearity

Modeling and compensation of comprehensive errors for thin-walled parts machining based on on-machine measurement

Force prediction in ultrasonic vibration-assisted milling